Isle of Wight · Heat pump installation

Heat pump installation in Norton, Isle of Wight

Air source heat pumps in and around Norton, from the first look to the final check and a fixed price agreed before any work starts.

  • Questions about listed buildings or conservation areas
  • Deciding on the outdoor unit position
  • Comparing heat pump types

Air source heat pumps for Norton

Air source heat pumps in Norton, done properly

We begin with a room-by-room heat loss survey. That tells us how much heat the home needs, room by room so the system is sized to match. Guesswork leads to systems that are too big or too small. If the problem is not knowing whether a grant applies and deciding which kind of heat pump suits the home, we can sort it out.

Space for an outdoor unit is rarely an issue near Norton, so the design focuses on heat loss and radiators.

Aftercare is simple, and most of it is in the manual: keep the outdoor unit clear, follow the manufacturer’s guidance on cleaning and book a service at the interval they recommend. It also keeps you on the right side of any warranty terms that ask for servicing.

Where
Norton (PO41)
Wider area
Isle of Wight
Accreditations
F-Gas certified, NICEIC approved, MCS
Quotes
Fixed after a survey or photos
Replies
Answered the same working day
Price guide
£8,000–£16,000 before the grant, 0% VAT on homes
Phone
07833 053749
Checked
30 October 2026

What happens on the day

The visit goes in the diary at a time that works for you, and we let you know if plans need to move. On arrival, the engineer compares the job with the survey, your pictures or the details you gave us. Anything unexpected is raised with you before we go further. After that, it takes a few days on site, depending on the cylinder, the radiators and the pipework involved. A note on how to find the property and where to park makes a visit to Norton easier.

  1. First we find out about the property, the heating you have now and what you’re hoping for.
  2. We survey the home room by room for heat loss, and check the emitters, hot water and outdoor unit position.
  3. The price comes back fixed and in writing, with the grant and VAT shown line by line.
  4. We fit the outdoor unit and connect it to the heating, hot water and controls.
  5. Commissioning, MCS certification and a handover of the controls finish the job.

Getting ready for the visit

  • Plan for pets to be kept clear during the visit
  • Make sure we can reach the consumer unit or fuse board
  • Mention any managing agent or landlord rules we need to follow

Get a fixed-price quote

Quotes don’t take long. Send a few details and photos, and we reply the same working day. If we need to see the property first, we book a survey at a time that works for you.

Get a quick quote

Read more

Landlords, agents and facilities managers

Whether it’s one property or many, the approach is the same: diagnosis, a fixed price, access agreed with the people on site and paperwork at the end.

We regularly work with managing agents. Send the address, what’s needed and how access works and we will come back with a fixed-price quote.

How we price air source heat pumps

Typical ranges are on our prices page, and your quote is built on your job. The quote depends on:

  • What we find on the survey or diagnosis
  • Access, including height, roofs and ladders
  • Which make and model is being fitted or worked on

A single unit or a whole estate, the quote is built the same way: what needs doing, how we get to it and what it needs. You’ll have a fixed price before any work starts, with VAT shown clearly.

What to send for a quote

When you call or email, these details help:

  • The fuse board and where it is in the property
  • A few photos of the room and the wall the unit is on, or will go on
  • A close-up of the unit’s label showing the model number

Want a quote for air source heat pumps? Please give us a ring on 07833 053749 or send an email and tell us about the job. We’ll talk you through the options and give you a fixed-price quote before you commit to anything.

What a heat pump looks like in Norton

Norton lies within about 1 mile of the sea. Salt air is hard on outdoor units, so a heat pump near the sea needs a sensible position and regular checks, and some models offer corrosion protection for coastal sites. The last census (2021) found about 71% of households in detached or semi-detached houses. Detached and semi-detached houses normally have room for the outdoor unit and a cylinder.

If your home is one of the older properties near St. James' Church, the survey checks whether it’s listed or in a conservation area before the outdoor unit position is chosen. Sizing comes from the heat each room loses on a cold day, not from the size of the old boiler.

Norton is about 4 miles south of Lymington, in the Isle of Wight. Homes and businesses alike in Norton, our engineers can help with air source heat pumps. You’ll hear back from us the same working day, and there’s a 24/7 emergency line. Our list for the Isle of Wight has 125 entries and Norton is among them. Our Worthing page covers places nearby, about 49 miles away.

Here we cover the PO41 postcode area. Local streets include Linstone Drive, Braxton Meadow and Hammond Close, all of which are in our area. Places around Norton that are also on our list: Keyhaven (3 miles north-west), Lower Pennington (3 miles north-west), Pennington (4 miles north-west), Lymore (4 miles north-west) and Milford on Sea (4 miles north-west). Larger places within reach include Newport (9 miles east), Ryde (15 miles east), Cowes (10 miles east) and Ventnor (15 miles south-east). Island and remote properties take a little more planning, so tell us where you are when you ask for a quote for air source heat pumps.

Local landmarks in Norton

We fit and service air conditioning in homes and premises around The King's Head Public House and the streets around them. The nearest railway station is Lymington Pier station, roughly 3.9 miles north of the centre. Other landmarks nearby include Lymington New Forest Hospital (4.8 miles north) and Yarmouth Castle (0.7 miles east). Open spaces near Norton include Afton Down and Lymington and Keyhaven Marshes Nature Reserve.

Map of Norton © OpenStreetMap contributors

What owners can safely do

Good habits make our visits easier, not unnecessary. Simple care keeps the air moving through the system, but the inside of the units, the refrigerant and the electrics still need a qualified engineer.

There are a few things you can safely do yourself: keeping the outdoor unit clear, checking the mode and set temperature, and the routine cleaning in the manual. Opening up the units, the electrics and the refrigerant circuit are a job for us.

Your questions about air source heat pumps in Norton

Can I fit a heat pump in Norton without planning permission?

The answer turns on the property and where the outdoor unit would sit. The centre of Norton is in a conservation area. Heat pumps on houses are often permitted development, but listed buildings need consent and conservation areas restrict outdoor units facing a road. Where it’s needed, we check with the planning department at Isle of Wight council, usually the authority for Norton.

Will you come out to Norton?

Yes, and the size of the place makes no difference to how we work. Visits to smaller places are planned so the engineer arrives with what the job needs.

Does the grant cover air-to-air heat pumps?

Yes, but only where it becomes the home’s main heating. An air-to-air heat pump can get £2,500 if it replaces the fossil-fuel heating, meets the full heating demand, is fitted by an MCS certified installer and is in a home. Fitted alongside a boiler, it will not qualify.

Am I eligible for a heat pump grant?

That depends on the scheme conditions, which we check for you. As the installer, we make the application where you qualify.

Why use an F-Gas certified company?

The law says any company working on equipment containing F gas has to be certified, and the engineers need their own qualifications. It means the refrigerant in your system is handled legally.

Do you work on commercial properties?

Yes. From a single let flat to offices, shops and public buildings, we work the same way: survey or diagnosis, a fixed price and proper paperwork.

Who has to arrange F-Gas leak checks?

The operator of the equipment, working with qualified engineers. Larger systems need regular checks: at least every 12 months from 5 tCO2e and every 6 months from 50 tCO2e. We can tell you which band your system falls into.

From one of our customers

“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”

Sarah M., East Grinstead

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead