Kent · Heat pump installation
Heat pump installation in Newtown, Kent
Looking for air source heat pumps in Newtown? We look at the job first, give you a fixed-price quote and do the work at a time that suits you, finishing with proper records.
- Finding a place for the outdoor unit
- Plans to switch to electric heating with a heat pump
- A boiler that’s getting old
What a heat pump looks like in Newtown
About 46% of homes in the Newtown area were built before 1919, according to VOA council tax data, and the 2021 Census found about 73% of households in detached or semi-detached houses. Older homes can lose heat faster, so a room-by-room heat loss calculation, and sometimes insulation or larger radiators, comes before sizing a heat pump. Houses normally have space for an outdoor unit and a hot water cylinder.
Hever Castle lies about 1 mile north. Owners of listed homes need consent before a heat pump is fitted, so it’s one of our first questions.
Newtown is about 6 miles north-east of East Grinstead, in Kent. If you need air source heat pumps in Newtown, please call us on 07833 053749 or write to us at info@aircondoctor.co.uk for a fixed-price quote. We work across London and the South East, Newtown included. Our Kent coverage runs to 922 places, and Newtown is one of them. The nearest of our city pages is East Grinstead, around 6 miles from Newtown.
The closest recent job we can point to from Newtown was on Church Road, Lingfield (RH7), about 5 miles west: installing two LG wall-mounted units: one in the open-plan kitchen-living area and one in the master bedroom.
Our engineers work on Pigdown Lane and Uckfield Lane and the roads around them. Every address in TN8 is covered. Places around Newtown that are also on our list: Markbeech (1 mile south), Hever (1 mile north), Chiddingstone Hoath (1 mile south-east), How Green (2 miles north) and Walter's Green (3 miles south-east). Further out, we also cover Sevenoaks (8 miles north-east), Royal Tunbridge Wells (7 miles east), Tonbridge (7 miles east) and Kings Hill (14 miles north-east).
Local landmarks in Newtown
Around Newtown, our work takes us to homes and businesses near The Kentish Horse pub and Chiddingstone Castle Park and Gardens, among other places. The closest station to Newtown is Hever station, about 1 mile north-west of the centre. Well-known places in the area include Haxted Watermill Museum (3.8 miles west) and Hever Castle (1 mile north).
How we handle air source heat pumps in Newtown
In England, an air source heat pump on a house can often go in under permitted development rights. Conditions include a maximum outdoor unit size of 1.5 m³, compliance with MCS 020(a), use for more than cooling alone and a site outside the curtilage of a listed building. We look at the planning position for your home during the survey. Common call-outs are for replacing a combi boiler with a heat pump and deciding on the outdoor unit position, on radiator systems, air-to-water heat pumps and hot water cylinders.
In a place like Newtown, some homes are listed, and permitted development doesn’t cover listed buildings, so we check consent first.
For a fault on a system that may still be under warranty, send us the make, model and installation date. We will tell you how the manufacturer’s warranty is likely to apply before any chargeable work goes ahead.
- Place
- Newtown (TN8)
- Region
- Kent
- Enquiries
- Answered the same working day
- Approvals
- F-Gas certified company, NICEIC approved, MCS
- Price
- A fixed price before work begins
- Typical price
- £8,000–£16,000 (0% VAT on homes), before the grant
- Telephone
- 07833 053749
- Checked
- 30 October 2026
Other services in Newtown
FAQs for Newtown
Will a heat pump in Newtown need planning permission?
That depends on the building and where the outdoor unit goes. Central Newtown sits inside a conservation area. Heat pumps on houses are often permitted development, but listed buildings need consent and conservation areas restrict outdoor units facing a road. Where it’s needed, we check with Sevenoaks council, which is usually the planning authority for Newtown.
Will you come out to Newtown?
Yes, and the size of the place makes no difference to how we work. A few photos and the postcode are enough to get things started.
Will skipping a service affect the warranty?
It can, for some brands. Send us the make and model and we will tell you what the manufacturer expects, and book the service at the interval they recommend.
What does F-Gas certified mean?
F-Gas certification shows a company is approved to work on equipment containing fluorinated gases, such as the refrigerant in air conditioning and heat pumps. In Great Britain, that certification is a legal requirement, not an optional extra, and we hold it.
Can I do the refrigerant work myself?
Not the refrigerant work. The F-gas rules require certified companies and qualified engineers for it, and a new circuit is notifiable under Part P unless a registered electrician, such as a NICEIC approved contractor, does it.
What accreditations do you have?
F-Gas certified, NICEIC approved and MCS certified for heat pumps, and we’re Checkatrade members. Our engineers also hold the individual F-gas qualifications needed to work on refrigerant.
Can we book visits on a schedule?
Yes. Send details of the systems and how they’re used, and we will suggest a schedule with a fixed price. Leak checks required by the F-gas rules can be built in for larger systems.
Fixed-price quotes for air source heat pumps in Newtown
Jobs vary more than people expect. What affects the quote:
- What we find on the survey or diagnosis
- One-off work versus a regular service cycle
- The brand, model and parts involved
The pipe route, the height of the units and how we reach them all affect the cost. Each of those is built into the quote, and the price is fixed before we start.
Helping us quote
When you contact us, it’s useful to have:
- Your consumer unit or fuse board
- Any previous service or F-Gas records
- A short video of any fault, such as a noise or a flashing light
VAT is set out clearly on every quote, with the rate that applies to your job. VAT can differ between homes and businesses and between kinds of work, so we confirm it on the quote. For a fixed-price quote, phone 07833 053749 or use the quote form.
Honest limits
We won’t sell you work that doesn’t address the problem, so here are the limits:
- Draught-proofing and insulation upgrades
- Disconnecting or servicing a gas boiler
- Tax rulings, which only HMRC can give
If in doubt, phone 07833 053749 and we will say what we think.
Where we work
- Air-to-water heat pumps
- Radiator systems
- Hot water cylinders
- Underfloor heating
- Homes heated by oil, LPG or gas
- Air-to-air heat pumps
Do you need air source heat pumps in Newtown?
Extensions, renovations and loft conversions are a natural time to rethink the heating. It’s simpler to plan radiators, pipework and a cylinder while the builders are in.
Most people get in touch after spotting something like this:
- Checking whether planning permission is needed
- Finding a place for the outdoor unit
- Deciding which kind of heat pump suits the home
Older homes near Church of the Holy Trinity may need extra checks for planning and heat loss before a heat pump is designed.
What to look for in a quote
- Whether the manufacturer’s warranty depends on regular servicing
- How extra work would be agreed if they find something unexpected
- If the figure could change on the day
How the visit works
Our engineers arrive at the time agreed with you and check the plan with you first. Dust sheets go down over floors and anything close to the work, and the electrics are made safe before any panel comes off. The work itself takes from a couple of days to around a week, depending on the system and how much of the heating changes. Rural lanes and tight entrances are worth mentioning before a visit to Newtown.
- We talk through your home, your current heating and what you want from a heat pump.
- On the visit we calculate what every room loses on a cold day, then check the radiators, room for a cylinder and outdoor unit options.
- You get a fixed-price quote, with any grant you’re eligible for and the VAT explained.
- Installation covers the outdoor unit, the indoor connections and the controls.
- Once it’s running correctly, the MCS certificate is issued and we show you the settings.
How to prepare
- Dig out any previous service or F-Gas records
- Clear the space around the indoor unit, or where it will go
- Tell us about access, such as roof hatches, high walls or locked plant areas
Getting a quote
Quoting starts with a diagnosis, from a site survey or, where the job is straightforward, from photos and measurements. After that, we send a fixed price so you know the cost before we begin.
Read more
From one of our customers
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead