Kent · Heat pump installation
Heat pump installation in Markbeech, Kent
Expert air source heat pumps for Markbeech: a survey or diagnosis, a fixed price, careful work and proper paperwork. Call for a fixed-price quote.
- Ageing boilers that will need replacing
- Questions about the Boiler Upgrade Scheme
- Questions about where the outdoor unit can go
Do you need air source heat pumps in Markbeech?
Air-to-air systems interest people who want cooling in summer as well as heating. They warm rooms directly through indoor units, and can cool them when it’s hot. Whether a grant applies depends on the scheme conditions.
Customers usually contact us when they notice something like this:
- A boiler that’s getting old
- Finding a place for the outdoor unit
- Checking eligibility for a heat pump grant
If your home is near Cowden station and heated by a gas boiler, an air-to-water heat pump can replace it where the survey shows it suits.
Before you book anyone
- What records you get at the end
- What happens if the job turns out to be different on the day
- The make and model of any parts or equipment being quoted
Air source heat pumps for homes and businesses in Markbeech
We begin with a room-by-room heat loss survey. That tells us how much heat the home needs, room by room, so the heat pump and the radiators or indoor units can be sized properly. Guesswork leads to systems that are too big or too small. If you’re dealing with finding a place for the outdoor unit and not knowing whether a grant applies, we can sort it out.
Older and listed homes in villages like Markbeech need extra care, and permitted development does not cover listed buildings, so we check consent first.
The records are your system’s health record: a dated account of the work and the readings we took. It makes the next visit quicker and any warranty question simpler and it’s worth keeping safe.
- Location
- Markbeech (TN8)
- Region
- Kent
- Approvals
- NICEIC approved, F-Gas certified, MCS
- Costs
- Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
- Quote
- Fixed after a survey or pictures
- Telephone
- 07833 053749
- Updated
- 30 October 2026
Landlords, agents and facilities managers
The F-gas rules share responsibility for leak checking between the equipment’s operator and the service technicians. In a let or managed building, it’s worth agreeing who that operator is and we’re happy to deal with whoever it is.
We work for landlords, letting agents and managing agents as well as homeowners and businesses. Tell us who the contact on site is and who should receive the paperwork and we will copy in whoever needs it.
Keeping the system healthy
Once we have finished, these simple steps help:
- Keep the outdoor unit clear all year
- Keep to regular servicing
- Seal draughts where you can
If anything does not seem right after installation, call 07833 053749, or email if that’s easier and we’ll look into it. A yearly service is a good habit.
Keep the outdoor unit clear of leaves, plants and stored items. Airflow is what it runs on, so keep it clear all year.
What happens on the day
Our engineers bring the tools, gauges and access equipment the job needs. You only need to give us clear access to the units, or their planned positions, and to the fuse board. The visit takes from a couple of days to around a week, depending on the system and how much of the heating changes. Somewhere like Markbeech, it helps to know about lanes, gates and where to park.
- First we talk through the property and the current system.
- We measure heat loss for every room.
- We design the system, check the radiators and cylinder and look at the outdoor unit position.
- Cost, grant and VAT appear on one fixed-price quote.
- We install, commission and register the system under MCS.
How to prepare
- Mention any managing agent or landlord rules we need to follow
- Plan for pets to be kept clear during the visit
- Move furniture away from the wall where we’ll be working
Ask for a quote
Photos are the fastest route to a quote: the room or the existing unit, the outside wall or roof where the outdoor unit sits or would go, and the label on any existing unit. Tell us the address and what you need, and simple jobs can often be priced without a visit.
Advice
Air source heat pumps in Markbeech: the local picture
Valuation Office Agency council tax records put about 46% of homes in Markbeech and the neighbourhoods around it before 1919, and about 73% of households live in detached or semi-detached houses, according to the last census (2021). Older homes can lose heat faster, so a room-by-room heat loss calculation, and sometimes insulation or larger radiators, comes before sizing a heat pump. Houses usually have space for an outdoor unit and a hot water cylinder.
If your home is listed, like Hever Castle about 1.3 miles north, listed building consent comes before any heat pump work.
Markbeech is about 6 miles north-east of East Grinstead, in Kent. Our engineers cover Markbeech for air source heat pumps, along with the rest of Kent. Our Kent coverage runs to 922 places, Markbeech among them. Our East Grinstead page covers places nearby, about 6 miles away.
The closest recent job we can point to from Markbeech was on Church Road, Lingfield (RH7), about 5 miles west: installing two LG wall-mounted units: one in the open-plan kitchen-living area and one in the master bedroom.
Streets in the area include Uckfield Lane and Cow Lane, each of them within reach. Our engineers cover all of the TN8 postcode area for air source heat pumps and the streets around it. Close to Markbeech, our area also takes in Newtown (1 mile north), Hever (1 mile north), Chiddingstone Hoath (1 mile east), How Green (2 miles north) and Teasley Mead (3 miles south-east). Within a short drive, we also cover Sevenoaks (8 miles north-east), Royal Tunbridge Wells (7 miles east), Tonbridge (8 miles east) and Kings Hill (15 miles north-east).
What’s near Markbeech
Locally, jobs take us to houses, flats and workplaces close to The Kentish Horse pub and Chiddingstone Castle Park and Gardens, among other places. The nearest railway station is Cowden station, about 0.8 miles south. Nearby you will also find Haxted Watermill Museum (3.8 miles north-west) and Hever Castle (1.3 miles north).
Towns and villages near Markbeech
What else we do in Markbeech
Questions from Markbeech
Can I get the Boiler Upgrade Scheme grant in Markbeech?
Yes, the scheme covers homes in England, including Markbeech, if they qualify. Air-to-water and ground source systems attract £7,500. Air-to-air gets £2,500, but only where it takes over from fossil-fuel heating and covers the whole home’s heating demand. The installer applies, and we are MCS certified.
Is a heat pump in Markbeech permitted development?
There’s no single answer: the building and the outdoor unit position decide it. Central Markbeech sits inside a conservation area. Heat pumps on houses are often permitted development, but listed buildings need consent and conservation areas restrict outdoor units facing a road. Where it’s needed, we check with the local planning authority (for Markbeech, usually Sevenoaks council).
Can I do any of the installation myself?
The refrigerant side has to be done by a qualified engineer working for an F-Gas certified company. That’s the law, not just our preference, and it also matters for the manufacturer’s warranty. We can quote for the whole job, from supply to commissioning.
Is the equipment covered by a warranty?
It’s the manufacturer’s, and the terms are theirs. Some terms depend on regular servicing by a qualified engineer so it’s worth keeping the service records.
Can we book visits on a schedule?
Yes. Maintenance contracts are part of what we do, set at the interval the system and the manufacturer’s terms need. Each visit is recorded, with F-Gas records where refrigerant work is involved.
What does an air-to-water heat pump cost?
Air-to-water installations cost £8,000–£16,000 (0% VAT on homes), before the grant. Air-to-air systems are priced after a survey, with the VAT confirmed on your quote.
Do I need to service the system to keep the warranty?
It depends on the manufacturer’s terms. Some manufacturers make regular servicing by a qualified engineer a condition of the warranty, so it’s worth checking. Keep every service record either way.
From one of our customers
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager