Kent · Heat pump installation
Air Source Heat Pumps in Chiddingstone Hoath
Looking for air source heat pumps in Chiddingstone Hoath? We diagnose first, fix the price and book the work around you, then sign it off with written records.
- Plans to switch to electric heating with a heat pump
- Questions about listed buildings or conservation areas
- An oil, LPG or gas boiler near the end of its life
Air source heat pumps around Chiddingstone Hoath
The Valuation Office Agency’s council tax figures put about 46% of homes in Chiddingstone Hoath and the neighbourhoods around it before 1919, and Census 2021 figures found about 73% of households in detached or semi-detached houses. Period properties can still suit a heat pump, but the design has to start from accurate heat loss figures. Detached and semi-detached houses normally have room for the outdoor unit and a cylinder.
Chiddingstone Castle lies about 1.6 miles north. Owners of listed homes need consent before a heat pump is fitted, so it’s one of our first questions.
Chiddingstone Hoath is about 6 miles west of Royal Tunbridge Wells, in Kent. From the centre of Chiddingstone Hoath to the outskirts, our engineers cover air source heat pumps, from a single room to a whole building. Chiddingstone Hoath is one of 922 towns, villages and districts in Kent we cover for homes and businesses. There’s also a page for East Grinstead, about 7 miles away.
Not far from Chiddingstone Hoath, a recent job of ours was on Hartfield Road, Forest Row (RH18), about 7 miles south-west: installing a Mitsubishi Electric multi-split system serving four bedrooms and a study.
Every address in TN8 is within our area, from busy streets to back roads. Close to Chiddingstone Hoath, our area also takes in Walter's Green (1 mile south-east), Markbeech (1 mile west), Newtown (1 mile north-west), Penshurst (2 miles east) and Teasley Mead (2 miles south). Further out, we also cover Sevenoaks (8 miles north), Royal Tunbridge Wells (6 miles east), Tonbridge (6 miles north-east) and Kings Hill (14 miles north-east).
What’s near Chiddingstone Hoath
Typical jobs here are in properties near Chiddingstone Castle Park and Gardens and The Rock Public House and the streets around them. Chiddingstone Hoath’s nearest station is Cowden station, roughly 1.4 miles west of the centre. Well-known places in the area include Chiddingstone Castle (1.6 miles north) and Kent and Sussex Hospital (5.4 miles east). The countryside around Chiddingstone Hoath includes Broadwater Warren RSPB Reserve.
How we handle air source heat pumps in Chiddingstone Hoath
Many air source heat pumps can be installed as permitted development in England, without a planning application. Conditions include a maximum outdoor unit size of 1.5 m³, compliance with MCS 020(a), use for more than cooling alone and a site outside the curtilage of a listed building. We check the rules for your property as part of the survey. If the problem is an oil, LPG or gas boiler near the end of its life and no space for a hot water cylinder, we can help.
In a place like Chiddingstone Hoath, some homes are listed, and permitted development does not cover listed buildings, so consent comes first.
Looking after a system is mostly common sense: keep the outdoor unit clear, follow the manufacturer’s guidance on cleaning and book a service at the interval they recommend. That also helps where the warranty terms ask for regular servicing.
- Where
- Chiddingstone Hoath (TN8)
- Wider area
- Kent
- Price guide
- £8,000–£16,000 before the grant, 0% VAT on homes
- Pricing
- Fixed-price quote after a site survey
- Certified
- NICEIC and F-Gas, MCS
- Telephone
- 07833 053749
- Reviewed
- 30 October 2026
Chiddingstone Hoath questions
Is Chiddingstone Hoath within the area you cover?
Yes, and the size of the place makes no difference to how we work. Visits to smaller places are planned so the engineer arrives with what the job needs.
Is planning permission needed for a heat pump in Chiddingstone Hoath?
That depends on the building and where the outdoor unit goes. A conservation area takes in the middle of Chiddingstone Hoath. A heat pump on a house can be permitted development if it meets the conditions, including the MCS noise check, but not within the grounds of a listed building, and in a conservation area the outdoor unit can’t face a road. Where needed, we check with the local planning authority (for Chiddingstone Hoath, usually Sevenoaks council).
Can I fit air conditioning or a heat pump myself?
The refrigerant side has to be done by a qualified engineer working for an F-Gas certified company. That’s the law, not just our preference, and it also matters for the manufacturer’s warranty. We can quote for the whole job, from supply to commissioning.
Which type of heat pump is right for my home?
Air-to-water replaces the boiler for heating and hot water, while air-to-air heats and cools rooms. The survey helps decide. Both are part of what we install.
Is there a Boiler Upgrade Scheme grant for air-to-air?
The air-to-air grant is £2,500, and only some homes qualify. The system has to replace the fossil-fuel heating and heat the whole home with an MCS certified installer.
Do you look at the job first?
Yes, always. We diagnose before we treat: the survey tells us what the job needs and how to do it and the fixed price is built on it.
How long will it take to install a heat pump?
As a guide, it takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes. The programme is planned to keep time without heating short and agreed before we start.
What we are called out for in Chiddingstone Hoath
The Boiler Upgrade Scheme has made people ask whether their home could qualify. Whether you can get the grant depends on your home and the scheme conditions and we confirm it before you go ahead.
Look out for any of the following:
- Working out where a cylinder could go
- A boiler that is getting old
- Questions about the Boiler Upgrade Scheme
Sizing comes from the heat each room loses on a cold day, not from the size of the old boiler.
What your quote should include
- Whether extra work needs your approval first
- Whether anyone has checked the property or the system first
- Who does the electrical work, and whether they can certify it
The process
Each visit follows the same order: check the plan with you, protect the area, do the work, test what we’ve done and explain it all to you. On site, the work takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes. A note on how to find the property and where to park makes a visit to Chiddingstone Hoath easier.
- We find out about your home and the heating you have now.
- Every room’s heat loss is worked out on site.
- We design the system, check the radiators and cylinder and look at the outdoor unit position.
- Cost, grant and VAT appear on one fixed-price quote.
- We install, commission and register the system under MCS.
Preparing for the visit
- Have the make and model of any existing unit to hand
- Name a contact who can meet us at the agreed time
- Tell us about parking and loading
Ask for a quote
Some jobs can be priced from pictures, while others need a survey. Bigger systems, commercial sites and awkward pipe routes are normally surveyed on site. Either way, you get a fixed price before any work is booked.
Related advice
Also near Chiddingstone Hoath
What else we do in Chiddingstone Hoath
Managing agents and facilities teams in Chiddingstone Hoath
When the building owner and the occupier are different, the lease or tenancy agreement normally sets out who maintains what. We’re happy to deal with either side, and the paperwork can go to both.
Running several properties is easier with one contractor. We work across London and the South East, so work at different addresses can be planned together and kept to a regular schedule.
What affects the quote in Chiddingstone Hoath
A fixed price needs a few facts first. We look at:
- How many units are involved
- The pipe route between the units
- The equipment or parts the job needs
No two properties are the same, so each one gets its own fixed-price quote. The equipment, how we reach it, the route between units and the work needed all make a difference.
What we need to know
Before you ask for a quote, gather:
- The postcode and whether it’s a home, flat or business
- Any error code or flashing light on the display
- A photo of the consumer unit with the cover closed
The quickest way to a quote is to send photos: the room or the existing unit, the outside wall or roof where the outdoor unit sits or would go, and the label on any existing unit. Add the address and what you’d like done, and simple jobs can often be priced without a visit.
What a customer said
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead