Kent · Heat pump installation
Air Source Heat Pumps in Maxton
Air source heat pumps, in Maxton and nearby. Call for a fixed-price quote; we reply the same working day.
- Finding a place for the outdoor unit
- Working out where a cylinder could go
- Comparing heat pump types
About our air source heat pumps in Maxton
For an air-to-water heat pump, the price is £8,000–£16,000 (0% VAT on homes), before the grant. The Boiler Upgrade Scheme can provide £7,500 towards an eligible air-to-water system in England and Wales and the installer makes the application. Eligibility depends on the property, so we confirm it before anything is agreed. Typical jobs include choosing between air-to-water and air-to-air and planning and permitted development questions, across homes heated by oil, LPG or gas, air-to-air heat pumps and hot water cylinders.
In a place like Maxton, some homes are listed, and permitted development doesn’t cover listed buildings, so we check consent first.
Aftercare is simple, and most of it is in the manual: keep the outdoor unit clear, follow the manufacturer’s guidance on cleaning and book a service at the interval they recommend. That also helps where the warranty terms ask for regular servicing.
- Location
- Maxton (CT17, CT15)
- Wider area
- Kent
- Price guide
- £8,000–£16,000 (0% VAT on homes), before the grant
- Price
- A fixed-price quote up front
- Credentials
- NICEIC and F-Gas, MCS
- Telephone
- 07833 053749
- Last updated
- 30 October 2026
What the work involves, system by system
Air-to-water heat pumps
Flow temperatures are lower than with a typical boiler, so radiator sizes matter.
Outdoor unit position and planning
The outdoor unit needs a position with good airflow, a solid base and a sensible pipe route. We also consider neighbours and noise, as MCS 020(a) includes a noise check.
What a heat pump looks like in Maxton
Maxton is within about 1 mile of the coast. Salt air is hard on outdoor units, so a heat pump near the sea needs a sensible position and regular checks, and some models offer corrosion protection for coastal sites. The centre of Maxton lies within a conservation area. Listed buildings are part of the picture here: about 3 within half a mile of the centre, such as Great Farthingloe Farmhouse (grade II). So the heat pump survey asks two extra questions here: is the home listed, and is it inside a conservation area? VOA council tax data put about 64% of homes in Maxton and the neighbourhoods around it before 1919, and about 51% of households live in terraced houses, according to the 2021 Census. Older homes can lose heat faster, so a room-by-room heat loss calculation, and sometimes insulation or larger radiators, comes before sizing a heat pump. In a terrace, the outdoor unit position and the MCS noise check need particular care.
Homeowners near Dover Priory station often ask whether a heat pump can take over from the boiler, and the heat loss survey answers that.
Maxton is about 1 mile south-west of Tower Hamlets, in Kent. Homes and businesses alike in Maxton, our engineers can help with air source heat pumps. You will hear back from us the same working day and our emergency line runs 24/7. Maxton is one of 922 towns, villages and districts in Kent where we work for homes and businesses. Eastbourne is in our area too, about 49 miles from Maxton.
We cover homes and businesses on Cow Lane, Manor Road and Mount Road and nearby roads. Here we cover the CT17 and CT15 postcode area. We also cover Aycliffe (1 mile south), Farthingloe (1 mile south-west), Dover (1 mile north), Church Hougham (2 miles west) and River (2 miles north). Larger places within reach include Canterbury (14 miles north-west), Folkestone (6 miles south-west), Deal (8 miles north-east) and Hythe (10 miles west).
What’s near Maxton
In Maxton, that means homes and buildings near Crown & Sceptre pub, Astor College for the Arts and St Edmund's Catholic School and the streets around them. The nearest railway station is Dover Priory station, roughly 0.8 miles north-east of the centre. Well-known places in the area include Old Town Gaol (1 mile north-east) and Dover Castle (1.6 miles east). Open spaces near Maxton include Dover Western Heights.
Before you call an engineer
For air conditioning, cleaning the indoor unit’s filters is the main job owners can do, if the manual says so. With the power off, they lift out, can be vacuumed or rinsed and must be fully dry before they go back. On a heat pump, the equivalent is keeping the outdoor unit clear and checking the controls.
Good habits make our visits easier, not unnecessary. Simple care keeps the air moving through the system, but the inside of the units, the refrigerant and the electrics still need a qualified engineer.
Signs you need air source heat pumps in Maxton
Many people look at heat pumps when an oil, LPG or gas boiler is getting old. Starting early leaves time for the survey, the design and any grant application, rather than rushing a replacement in winter.
The things we’re asked about most include:
- Finding a place for the outdoor unit
- Moving away from fossil-fuel heating
- Working out where a cylinder could go
If your home is one of the older properties near St Martin's Church, the survey checks whether it’s listed or in a conservation area before the outdoor unit position is chosen.
What your quote should include
- Whether they hold F-Gas company certification, not just individual qualifications
- What paperwork you’ll receive afterwards
- What’s in the price and what isn’t
Towns and villages near Maxton
What else we do in Maxton
Common questions in Maxton
Does being near the sea make a difference to air source heat pumps in Maxton?
It can. Maxton is within about 1 mile of the coast, and salt air speeds up corrosion on outdoor units. We site outdoor units out of the worst of the sea wind where possible and can suggest models with corrosion protection where the manufacturer offers it.
Is the heat pump grant available in Maxton?
Yes, if the home and the heat pump meet the scheme’s rules: Maxton is in England, where it applies. The amount depends on the type of heat pump, and the survey confirms which applies. You do not apply yourself: the MCS certified installer does, which is us.
Is a heat pump permitted development?
Under the Planning Portal rules, a heat pump on a house can often be permitted development. Listed buildings and their curtilages are excluded, and listed building consent is a separate matter. We check what applies to you.
Do you offer maintenance contracts?
Yes. Maintenance contracts are part of what we do, with visits at the interval your system and the manufacturer need. Every visit is recorded, with F-Gas records where refrigerant work is involved.
Do I need new radiators for a heat pump?
We find out during the survey. Where a radiator is already large enough, it stays and any changes are in the quote.
Who is responsible for leak checks?
The F-gas rules share it between the equipment’s operator and the engineers who work on it. The interval depends on the refrigerant charge, measured in tonnes of CO2 equivalent: at least yearly for 5 to under 50 tCO2e, and every 6 months for 50 to under 500 tCO2e.
Can I fit air conditioning or a heat pump myself?
Not the refrigerant work. The F-gas rules require certified companies and qualified engineers for it, and a new circuit is notifiable under Part P unless a registered electrician, such as a NICEIC approved contractor, does it.
How it works
We keep the work area tidy as we go, with sheets down and mess cleared as we go. If we need to drill through a wall, we agree the spot with you first. On site, it takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes. We agree a date with you and plan the visit to Maxton so we arrive with what’s needed.
- We talk through your home, your current heating and what you want from a heat pump.
- A heat loss survey works out how much heat each room needs, and we look at the radiators, the cylinder space and where the outdoor unit could go.
- You get a fixed-price quote, with any grant you’re eligible for and the VAT explained.
- The outdoor unit, the indoor equipment and the controls are installed and connected.
- The system is commissioned and registered under MCS, and we show you how to use it.
Preparing for the visit
- Plan for pets to be kept clear during the visit
- Mention any parking restrictions near the property
- Tell us about access, such as roof hatches, high walls or locked plant areas
Getting a quote
Want a quote for air source heat pumps? Please ring us on 07833 053749, or email if that’s easier and tell us about the job. We’ll explain what we’d recommend and why, then send a fixed-price quote before you commit to anything.
Advice
What a customer said
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead