Kent · Heat pump installation
Heat pump installation in Kingsnorth, Kent
Air source heat pumps in and around Kingsnorth, from a site survey or diagnosis to sign-off with the price fixed before work begins.
- Plans to switch to electric heating with a heat pump
- Checking whether planning permission is needed
- Comparing heat pump types
Leave it or put it right?
A sudden boiler failure rarely leaves room to plan a heat pump properly. Planning ahead gives time for the heat loss survey, the design and the grant application while the old heating still works. Getting the date in early helps for a place like Kingsnorth.
What you pay depends on the system and the number of rooms or units, how easy the units are to reach and the parts and time the job needs. We give you a fixed price before we start, so there are no surprises.
Why people in Kingsnorth choose us
- We reply to enquiries the same working day
- We work on all the leading brands
- Warranty terms set out brand by brand
- A 24/7 emergency line
Read how installs are priced or our accreditations and certificates.
Air source heat pumps in Kingsnorth, done properly
Heat pumps run at lower flow temperatures than most boilers, so radiators may need to be larger to give out the same heat. We check each radiator against the room’s heat loss and anything that needs changing is in the quote. The work covers air-to-water heat pumps, hot water cylinders and underfloor heating, and common reasons people get in touch are not knowing whether a grant applies and comparing heat pump types.
For a home around Kingsnorth that’s off mains gas and heated by oil or LPG, an extra £1,500 is available through the Boiler Upgrade Scheme until March 2027.
For a fault on a system that may still be under warranty, send us the make, model and installation date. We’ll tell you how the manufacturer’s warranty is likely to apply before anything chargeable is done.
- Where
- Kingsnorth (TN23, TN26)
- Region
- Kent
- Quote
- A fixed-price quote up front
- Typical price
- Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
- Credentials
- NICEIC and F-Gas, MCS
- Enquiries
- On the working day you ask
- Telephone
- 07833 053749
- Updated
- 30 October 2026
Places near Kingsnorth
What else we do in Kingsnorth
What the work involves, system by system
Heat loss surveys
We look at walls, windows, floors, roofs and ventilation along with the room sizes.
VAT on heat pumps
Heat pumps in homes carry 0% VAT until 31 March 2027, and 5% after that following HMRC’s rules on energy-saving materials. It doesn’t apply to businesses.
Your questions about air source heat pumps in Kingsnorth
Can I get the Boiler Upgrade Scheme grant in Kingsnorth?
Kingsnorth is in England, where the Boiler Upgrade Scheme runs. Air-to-water and ground source systems attract £7,500. Air-to-air gets £2,500, but only where it takes over from fossil-fuel heating and covers the whole home’s heating demand. You don’t apply yourself: the MCS certified installer does, which is us.
Can I fit a heat pump in Kingsnorth without planning permission?
It comes down to the building and the spot chosen for the outdoor unit. A conservation area takes in the middle of Kingsnorth. On a house, an air source heat pump can often go ahead under permitted development, with an outdoor unit of no more than 1.5 cubic metres and an installation that meets MCS 020(a), which includes a noise check. Those rights do not reach the grounds of a listed building, and conservation areas rule out walls or roofs facing a road. If that might affect you, we ask the planning department at Ashford council, normally the authority for Kingsnorth.
Do you survey before quoting?
Yes. Every job is looked at first, either on a site survey or from photos and details for simple jobs. Then you get a fixed-price quote.
Do you work in Kingsnorth?
Yes. Our area takes in London and the counties of the South East, and that includes Kingsnorth.
Which type of heat pump is right for my home?
It depends on your home, your heating and whether you want cooling. The grant is £7,500 for eligible air-to-water systems and £2,500 for air-to-air in limited cases. We explain the options after the survey.
Will I get records for the system?
Yes. You get a written record of every visit, including F-Gas records for any refrigerant work. File them with the system’s paperwork.
How long does a heat pump installation take?
It takes a few days on site, depending on the cylinder, the radiators and the pipework involved. How much of the heating changes decides most of the time and the timing is set out with your quote.
Homes in Kingsnorth and heat pumps
About 38% of homes in and around Kingsnorth have been built since 2000, according to the Valuation Office Agency’s council tax figures, and the last census (2021) found about 60% of households in detached or semi-detached houses. Better insulated, newer homes are often a good match for a heat pump. Finding room for the outdoor unit and a cylinder is seldom a problem in homes like these.
With Godinton House about 3.2 miles north-west, it’s worth asking whether your own home is listed before planning a heat pump. Period properties close to Church of St Michael can suit a heat pump, though insulation and any heritage protection are checked first.
Kingsnorth is about 2 miles south of Ashford, in Kent. Whether you’re in the middle of Kingsnorth or further out, we cover air source heat pumps, from small jobs to large ones. Count every place we list in Kent and you reach 922, with Kingsnorth on the list. There’s also a page for Eastbourne, roughly 34 miles from Kingsnorth.
The closest recent job we can point to from Kingsnorth was on Mermaid Street, Rye (TN31), about 13 miles south-west: installing three Fujitsu wall-mounted units in guest bedrooms, with the outdoor units positioned in the hotel’s walled rear garden.
If your postcode is in TN23 and TN26, the property is within reach. Our engineers work on Church Hill, South Lea and Ashford Road and nearby roads. Close by, we work in Park Farm (1 mile north-east), Stubb's Cross (1 mile west), Stanhope (1 mile north), Newtown (1 mile north-east) and Finberry (1 mile east). Further out, we also cover Canterbury (15 miles north-east), Folkestone (13 miles east), Faversham (14 miles north) and Hythe (10 miles east).
Local landmarks in Kingsnorth
We fit and service air conditioning in homes and premises around Ashford Green Corridors, John Wallis Academy and Queen's Head Public House. Kingsnorth’s nearest station is Ashford International station, roughly 1.9 miles north. Other landmarks nearby include William Harvey Hospital (2.8 miles north-east) and Ashford Designer Outlet (1.5 miles north-east). For a walk, there’s Orlestone Forest.
Pricing air source heat pumps in Kingsnorth
You will get a fixed price before work begins. It’s based on:
- How far the pipework has to run, and where
- The electrical supply and whether a new circuit is needed
- What we find on the survey or diagnosis
Homes, offices, shops and public buildings are all priced the same way: the equipment, the access, the work involved and the time it takes. Call for a fixed-price quote and we’ll go through it with you.
Asking for a quote
There’s no need for technical detail. Just send:
- The remote or wall controller showing any error
- Where the property is and what kind of building it is
- Your installation or service records
Photos are enough for some jobs; others need a visit first. Bigger systems, commercial sites and awkward pipe routes are normally surveyed on site. Either way, you get a fixed price before any work is booked.
How it works
Our engineers arrive at the time agreed with you and check the plan with you first. Floors and furniture near the work are covered with dust sheets, and anything electrical is made safe before work starts. On site, it takes a few days for most air-to-water installations, with air-to-air systems often quicker. Photos of the room and the outside of the property help us plan a visit to Kingsnorth.
- Step one is understanding the house, how it’s heated today and what you’d like to change.
- A heat loss survey works out how much heat each room needs, and we look at the radiators, the cylinder space and where the outdoor unit could go.
- You get a fixed-price quote, with any grant you are eligible for and the VAT explained.
- Fitting day: the outdoor unit is placed, the indoor side connected and the controls set up.
- Once it’s running correctly, the MCS certificate is issued and we show you the settings.
Before we arrive
- Move furniture away from the wall where we will be working
- Clear access to the fuse board
- Give us access to the outside wall, roof or yard where the outdoor unit sits
Getting a price
Quotes don’t take long. Send a few details and photos, and we reply the same working day. If we need to see the property first, we book a survey at a time that works for you.
Read more
From one of our customers
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager