Hampshire · Heat pump installation
Heat pump installation in Hyde, Hampshire
For heat pump installation in Hyde, one call is all it takes: diagnosis, fixed price, work and sign-off. An F-Gas certified company, NICEIC approved, on Checkatrade.
- Questions about where the outdoor unit can go
- Not knowing whether a grant applies
- Wanting to stop using oil, LPG or gas for heating
What affects the cost of air source heat pumps
Before we fix a price, we need to know a few things. We check:
- How many units are involved
- The electrical supply and whether a new circuit is needed
- One-off work versus a regular service cycle
Putting several jobs into one visit often makes better use of the time. Tell us about everything you’d like looked at and we will price it together.
Before you get in touch
To help us quote quickly, send us:
- Where the property is and what kind of building it is
- A few pictures of the room and the wall the unit is on, or will go on
- Any previous service or F-Gas records
Some jobs can be priced from photos, while others need a survey. Bigger systems, commercial sites and awkward pipe routes are normally surveyed on site. Either way, you get a fixed price before any work is booked.
Air source heat pumps in Hyde, done properly
We install air source heat pumps in Hyde and across Hampshire, and we are MCS certified. There are two kinds: air-to-water, which heats radiators or underfloor heating and your hot water, and air-to-air, which warms rooms through indoor units and can also cool. We will explain which type fits your home and why. Typical jobs include questions about where the outdoor unit can go and checking whether planning permission is needed, across air-to-water heat pumps, underfloor heating and radiator systems.
In a place like Hyde, some homes are listed, and permitted development doesn’t cover listed buildings, so consent comes first.
Nothing is signed off by word of mouth: commissioning details for an installation, a fault and repair note for a repair, or a record of the service. File it with the manual, because it helps with any later warranty question.
- Place
- Hyde (SP6)
- Wider area
- Hampshire
- Credentials
- F-Gas certified company, NICEIC approved, MCS
- Quote
- Fixed after a survey or photos
- Price guide
- Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
- Call
- 07833 053749
- Page updated
- 30 October 2026
Honest limits
A few issues sit outside what this work can do:
- A grant for a home that doesn’t meet the scheme rules
- Improving the building’s insulation
- Gas boiler work, such as disconnecting the old boiler, which needs a Gas Safe registered engineer
Not sure which it is? You can ring us on 07833 053749 or write to us at info@aircondoctor.co.uk and we’ll tell you honestly before you book.
Parts of the system we cover
- Homes heated by oil, LPG or gas
- Underfloor heating
- Radiator systems
- Hot water cylinders
- Air-to-air heat pumps
- Air-to-water heat pumps
How the visit works
We keep the work area tidy as we go, with dust sheets down and offcuts and packaging cleared up. If we need to drill through a wall, we agree the spot with you first. On site, it takes a few days for most air-to-water installations, with air-to-air systems often quicker. Photos of the existing unit help with repairs and servicing in Hyde.
- First, a chat about the property and your goals for the heating.
- We survey for heat loss and look at radiators, cylinder space and outdoor unit options.
- We explain which type of heat pump suits the home and whether a grant could apply.
- We install the heat pump and connect it up.
- The job ends with commissioning, the MCS certificate and a walk through the controls.
How to prepare
- Unlock any gate, garage or side passage we need
- Tell us about access, such as roof hatches, high walls or locked plant areas
- Make sure someone can let us in at the agreed time
Getting a quote
Every quote shows the VAT clearly, with the rate that applies to your job. Homes, businesses and different kinds of work can be treated differently for VAT, so we confirm it in writing rather than guess. To get one, ring us on 07833 053749 or fill in the contact form.
Related advice
Before you call an engineer
Keep a note of anything odd: error codes, noises, drips, smells or a drop in performance. It helps us diagnose quickly, and a photo of the display helps even more.
Never try to top up, release or handle refrigerant yourself. The law requires anyone working on equipment containing F gas to hold the right qualifications, and the company to be certified, and escaping refrigerant can cause cold burns. If you suspect a leak, switch the system off and call us.
Heat pumps in Hyde: local notes
The middle of Hyde is part of the Western Escarpment Conservation Area. Thatched Cottage and the Cottage, listed at grade II, is one of roughly 13 protected buildings and structures in the half-mile around Hyde’s centre. That affects heat pumps: listed buildings need consent, and conservation areas limit where the outdoor unit can go under permitted development. Where needed, we check with the local planning authority (usually New Forest council). About 78% of households live in detached or semi-detached houses, according to Census 2021 figures. Houses normally have space for an outdoor unit and a hot water cylinder.
Historic houses such as Breamore House, about 4.4 miles north, are a reminder that listed homes need consent before a heat pump goes in. If your home is one of the older properties near Church of the Holy Ascension, the survey checks whether it’s listed or in a conservation area before the outdoor unit position is chosen.
Hyde is in Hampshire. Our engineers cover Hyde for air source heat pumps, along with the rest of Hampshire. Count every place we list in Hampshire and you reach 683, with Hyde on the list. You can also see our page for Guildford, roughly 57 miles from Hyde.
From Gorley Lynch and Hyde Lane to the smaller roads in between, the whole area is covered. If your postcode is in SP6, you are inside the area we cover. Close to Hyde, our area also takes in Hungerford (1 mile west), Frogham (1 mile north-east), North Gorley (1 mile west), Blissford (1 mile north-east) and Stuckton (1 mile north-west). We also work in nearby towns such as Totton (11 miles east), Lymington (14 miles south-east), Romsey (13 miles north-east) and New Milton (12 miles south-east).
Around Hyde
Typical jobs here are in properties near The Burgate School and Sixth Form. A little further out are Godshill Castle Hill (2.5 miles north) and Fordingbridge Doll Museum (1.7 miles north-west). Not far away are Blashford Lakes and Linbrook Lake.
Other services in Hyde
FAQs for Hyde
Does the Boiler Upgrade Scheme cover homes in Hyde?
Yes, the scheme covers homes in England, including Hyde, if they qualify. Whether your home qualifies, and for how much, depends on the type of heat pump and the heating it replaces. The installer applies, and we’re MCS certified.
Is Hyde within the area you cover?
Yes. Hyde is within the area we cover across London and the South East. Visits to smaller places are planned so the engineer arrives with what the job needs.
Is there a survey before the work?
Yes. Every job is looked at first, either on a site survey or from photos and details for simple jobs. A fixed-price quote follows.
How do you keep the place clean during the work?
We put dust sheets over floors and furniture near the work first, and we tidy up as we go. At the end, we clear up and show you what we’ve done.
When will I hear back?
On the same working day you contact us. After that, we agree a survey, diagnosis or installation date that suits you, with a fixed price before work starts.
Who has to arrange F-Gas leak checks?
Whoever operates the equipment, together with the technicians who service it. Systems below 5 tCO2e fall outside the set leak check intervals, while larger ones need checks at least every 12 months, or every 6 months from 50 tCO2e. We’ll work out which band applies to yours.
Will I need planning consent for an air source heat pump?
Many installations on houses in England fall under permitted development, subject to the rules. Listed buildings and their curtilages are excluded, and listed building consent is a separate matter, so we check for your property.
What a customer said
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager