Hampshire · Heat pump installation
Heat pump installers in Blissford
Looking for air source heat pumps in Blissford? We look at the job first, give you a fixed-price quote and do the work at a time that suits you, finishing with proper records.
- Checking emitters for a heat pump
- Not knowing whether a grant applies
- Deciding on the outdoor unit position
What owners can safely do
Write down what you notice: an error code, a new noise, a drip, a smell or a change in how well the system heats or cools. It helps us diagnose quickly, and a photo of the display helps even more.
Owners can handle the everyday basics: keep the outdoor unit clear of leaves, plants and clutter, check the settings and the remote, and follow the cleaning the manual describes. Anything inside the units, the electrics and the refrigerant is engineer’s work.
Air source heat pumps in Blissford
An air-to-water heat pump heats water to a lower temperature than a typical boiler which means some radiators may need upsizing. The survey shows which rooms are fine and which need changes and anything that needs changing is in the quote. The work covers homes heated by oil, LPG or gas, underfloor heating and hot water cylinders, and people most often call us about wanting to stop using oil, LPG or gas for heating and comparing heat pump types.
For a home around Blissford that’s off mains gas and heated by oil or LPG, an extra £1,500 is available through the Boiler Upgrade Scheme until March 2027, on top of the £7,500.
Aftercare is simple, and most of it is in the manual: clear space around the outdoor unit, the cleaning the manual describes and a service at the recommended interval. It also keeps you on the right side of any warranty terms that ask for servicing.
- Place
- Blissford (SP6)
- Region
- Hampshire
- Prices
- £8,000–£16,000 (0% VAT on homes), before the grant
- Credentials
- F-Gas certified, NICEIC approved, MCS
- Price
- A fixed price before any work starts
- Telephone
- 07833 053749
- Last updated
- 30 October 2026
Also near Blissford
Other services in Blissford
What the work involves, system by system
Hot water cylinders
The cylinder size depends on how much hot water the household uses.
Heat loss surveys
Without a proper survey, a heat pump can be too big or too small, and both cause problems.
What we are called out for in Blissford
Some homes heated by electric heaters or storage heaters consider a heat pump instead. The survey tells you whether it’s practical and what’s involved along with whether any grant could apply.
If any of these sounds familiar, it’s worth a diagnosis:
- Plans to switch to electric heating with a heat pump
- Working out where a cylinder could go
- A boiler that’s getting old
Older homes near Church of the Holy Ascension may need extra checks for planning and heat loss before a heat pump is designed.
Questions to ask before booking
- The make and model of any parts or equipment being quoted
- Whether you get F-Gas records where refrigerant is involved
- Whether the manufacturer’s warranty depends on regular servicing
How it works
Protection comes first: dust sheets over floors and furniture near the work and nothing is moved without asking you. After that, anything electrical is made safe and we start. The work on site takes from a couple of days to around a week, depending on the system and how much of the heating changes, and we tidy up before we leave. Photos of the room and the outside of the property help us plan a visit to Blissford.
- Step one is understanding the house, how it’s heated today and what you’d like to change.
- On the visit we calculate what every room loses on a cold day, then check the radiators, room for a cylinder and outdoor unit options.
- You get a fixed-price quote, with any grant you are eligible for and the VAT explained.
- Installation covers the outdoor unit, the indoor connections and the controls.
- Commissioning, MCS certification and a handover of the controls finish the job.
Before we arrive
- Let us know where we can park and unload
- Clear the space around the indoor unit, or where it will go
- Clear access to the fuse board
Ask for a quote
Quoting starts with a diagnosis, either on a site survey or, for simple jobs, from your photos and details. After that, we send a fixed price so you know the cost before we begin.
Read more
Your questions about air source heat pumps in Blissford
Will you come out to Blissford?
Yes, and the size of the place makes no difference to how we work. We’re based in East Grinstead and plan each visit so the job can be finished in one trip where possible.
Is the heat pump grant available in Blissford?
Yes, if the home and the heat pump meet the scheme’s rules: Blissford is in England, where it applies. It gives £7,500 towards an air-to-water or ground source heat pump, or £2,500 towards an air-to-air heat pump that replaces the fossil-fuel heating and meets the whole home’s heating need. The installer applies, and we are MCS certified.
Can you look at a system you didn’t fit?
Yes. We start with a proper look and tell you honestly what we find, including any issues with how it was fitted. Any work is priced before it goes ahead.
Do you work on commercial properties?
Yes. From a single let flat to offices, shops and public buildings, we work the same way: survey or diagnosis, a fixed price and proper paperwork.
How long does a heat pump installation take?
An installation takes a few days on site, depending on the cylinder, the radiators and the pipework involved. The survey lets us set a firm programme, and you can give us a ring on 07833 053749 or email us to book it.
What does F-Gas certified mean?
F-Gas certification shows a company is approved to work on equipment containing fluorinated gases, such as the refrigerant in air conditioning and heat pumps. In Great Britain, that certification is a legal requirement, not an optional extra, and AirCon Doctor is certified.
How soon will you get back to me?
We reply to enquiries the same working day. For a breakdown that can’t wait, call our 24/7 emergency line.
Homes in Blissford and heat pumps
The last census (2021) found about 78% of households in detached or semi-detached houses. Houses typically have space for an outdoor unit and a hot water cylinder. The middle of Blissford is part of the Western Escarpment Conservation Area. Historic England lists about 3 buildings and structures within half a mile of the centre of Blissford, including Detached Cottage 10 Metres East of Sunnyview (grade II). So the heat pump survey asks two extra questions here: is the home listed, and is it inside a conservation area?
If your home is listed, like Breamore House about 3.8 miles north, listed building consent comes before any heat pump work.
Blissford is in Hampshire. Homes and businesses alike in Blissford, our engineers can help with air source heat pumps. We reply to enquiries the same working day and our emergency line runs 24/7. 683 places in Hampshire are on our list, large and small. Guildford is in our area too, around 56 miles away.
All of SP6 is within our area. You’ll find streets such as Blissford Hill, Blissford Cross and Abbots Well Road, and we cover them all. We also cover Frogham (1 mile south), Hyde (1 mile south-west), Hungerford (1 mile south-west), Stuckton (1 mile west) and Criddlestyle (1 mile north-west). Further out, we also cover Totton (11 miles east), Lymington (14 miles south-east), Romsey (13 miles north-east) and New Milton (12 miles south).
Landmarks near Blissford
Typical jobs here are in properties near The Fighting Cocks pub and The Burgate School and Sixth Form and the streets around them. Nearby you will also find Fordingbridge Doll Museum (1.6 miles west) and Godshill Castle Hill (1.8 miles north). For a walk, there’s Blashford Lakes and Linbrook Lake.
From one of our customers
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead