Greater London · Heat pump installation

Heat pump installation in Heath Park, Greater London

For MCS certified installation of air source heat pumps for heating and hot water, with the Boiler Upgrade Scheme grant applied for in Heath Park, one call is all it takes, from the first look to sign-off. F-Gas certified, NICEIC approved and Checkatrade members.

  • Not knowing whether a grant applies
  • Comparing heat pump types
  • Questions about where the outdoor unit can go

Air source heat pumps across Heath Park

Air source heat pumps for homes and businesses in Heath Park

We begin with a room-by-room heat loss survey. It shows how much heat each room needs on a cold day so the system is sized to match. Sizing by rule of thumb isn’t good enough. The work covers radiator systems, homes heated by oil, LPG or gas and underfloor heating, and common reasons people get in touch are radiators that may be too small for a heat pump and deciding which kind of heat pump suits the home.

In a London area like Heath Park, many homes are flats or terraces with little outside space, which affects which heat pump suits. Air-to-water needs room for the outdoor unit and normally a cylinder, while an air-to-air system needs less space.

Think of the paperwork as the system’s health record: a dated account of the work and the readings we took. It makes the next visit quicker and any warranty question simpler, so keep it safe.

Location
Heath Park (RM11, RM1, RM2)
Region
Greater London
Certified
NICEIC approved, F-Gas certified, MCS
Enquiries
On the working day you ask
Typical price
£8,000–£16,000 before the grant, 0% VAT on homes
Quote
Fixed after a survey or photos
Call
07833 053749
Reviewed
30 October 2026

Homes in Heath Park and heat pumps

VOA council tax data show about 48% of homes in the Heath Park area date from 1919 to 1939. Homes of that age often have cavity walls that may or may not be insulated, which the survey checks. London homes can be short of space for an outdoor unit and cylinder, which affects the choice of heat pump.

Hare Hall lies about 0.8 miles north-east. Owners of listed homes need consent before a heat pump is fitted, so it’s one of our first questions. If your home is one of the older properties near Saint Alban Church of England, the survey checks whether it’s listed or in a conservation area before the outdoor unit position is chosen.

Heath Park is about 1 mile east of Romford, in Greater London. Whether you are in the middle of Heath Park or further out, our engineers cover air source heat pumps, from a single room to a whole building. Count every place we list in Greater London and you reach 764, with Heath Park on the list. London is in our area too, about 14 miles from Heath Park.

Not far from Heath Park, a recent job of ours was on Greenwich High Road, Greenwich (SE10), about 11 miles south-west: installing a Mitsubishi Electric wall-mounted unit in the retail area and a second unit in the stockroom and office.

That includes properties on Moss Lane, Park Lane and Manor Road and the roads around them. Our working area takes in RM11, RM1 and RM2. Close by, we work in Ardleigh Green (1 mile north-east), Hornchurch (1 mile south-east), Emerson Park (1 mile east), Gidea Park (1 mile north) and Gallows Corner (1 mile north). Further out, we also cover London (14 miles west), St Pancras (14 miles west), Shoreditch (12 miles west) and Walthamstow (10 miles west).

Around Heath Park

Typical jobs here are in properties near Havering College of Further and Higher Education, Frances Bardsley Academy for Girls and Haynes Park. For rail, the closest station is Gidea Park station, roughly 0.5 miles north. Well-known places in the area include The Mercury Mall (0.8 miles north-west) and Upminster Tithe Barn Museum of Nostalgia (2.4 miles east). Not far away are Hornchurch Cutting.

Map of Heath Park © OpenStreetMap contributors

Common questions in Heath Park

Does the Boiler Upgrade Scheme cover homes in Heath Park?

Yes, if the home and the heat pump meet the scheme’s rules: Heath Park is in England, where it applies. Whether your home qualifies, and for how much, depends on the type of heat pump and the heating it replaces. The installer applies, and we’re MCS certified.

Can you fit air conditioning in a London flat in Heath Park?

Often, yes, but the lease and the freeholder typically have a say. Permitted development rules for flats are tighter than for houses, so we check the outdoor unit position and give you the details to send to the freeholder or managing agent.

Will you make a mess?

We put dust sheets over floors and furniture near the work first, and the area is kept tidy throughout. At the end, we clear up and show you what we’ve done.

Can I do the refrigerant work myself?

No, not the refrigerant side. The F-gas rules require certified companies and qualified engineers for it, and a new circuit is notifiable under Part P unless a registered electrician, such as a NICEIC approved contractor, does it.

Who is responsible for leak checks?

The F-gas rules share it between the equipment’s operator and the engineers who work on it. The interval depends on the refrigerant charge, measured in tonnes of CO2 equivalent: at least every 12 months from 5 tCO2e, and every 6 months from 50 tCO2e.

Will I get records for the system?

Yes. It’s the record a manufacturer or the next engineer will ask to see: the date, the work, and any refrigerant added or recovered.

Do you cover Heath Park?

Yes. Our engineers work in Heath Park, within the South East and London area we cover. Our base is in East Grinstead, West Sussex.

What we do, step by step

Anything involving refrigerant is handled by F-Gas qualified engineers, as the law requires, and electrical work is done by us as NICEIC approved contractors. So on the day, you do not need a separate electrician for the electrical side. The work takes a few days for most air-to-water installations, with air-to-air systems often quicker. In a London area like Heath Park, parking and access are worth sorting out before the day.

  1. We start with your plans and the property.
  2. We survey for heat loss and look at radiators, cylinder space and outdoor unit options.
  3. We recommend air-to-water or air-to-air and check the grant position.
  4. Installation follows on the agreed dates.
  5. The job ends with commissioning, the MCS certificate and a walk through the controls.

Before we arrive

  • Let us know if the building has a permit or sign-in process
  • Unlock any gate, garage or side passage we need
  • Plan for pets to be kept clear during the visit

Getting a price

Need a price for air source heat pumps? Please call 07833 053749 with a few details about the property. We will talk you through the options and give you a fixed-price quote before you commit to anything.

Get a quick quote

Advice

Before you call an engineer

Leave the units and pipework where they are. Disconnecting a system means dealing with refrigerant, which only a qualified engineer can do, and the electrical side needs a competent person. If you need something moved, we can quote for it.

Owners can handle the everyday basics: keeping the outdoor unit clear, checking the mode and set temperature, and the routine cleaning in the manual. Anything inside the units, the electrics and the refrigerant is engineer’s work.

Why act early in Heath Park

From 1 April 2027, VAT on heat pumps in homes rises from 0% to 5%. It’s a date to bear in mind when planning, though the right time also depends on your home and heating. In a London building, getting the freeholder’s or agent’s agreement can take a while, so it’s worth starting early.

Homes, offices, shops and public buildings are all priced the same way: the equipment, the access, the work involved and the time it takes. Ask for a fixed-price quote and we’ll go through it with you.

What you get with us

  • F-Gas company certification
  • NICEIC approved electrical contractors
  • Emergency calls taken 24/7
  • Warranty terms set out brand by brand

Read what air conditioning costs or our accreditations.

Fixed-price quotes for air source heat pumps in Heath Park

The quote reflects the job in front of us. We take into account:

  • How many units are involved
  • What state the existing equipment is in
  • Whether the existing supply is suitable

A single unit or a whole estate, we price it on the same basis: what needs doing, how we get to it and what it needs. You will have a fixed price before work begins, and the quote sets out the VAT.

Asking for a quote

Before you ask for a quote, gather:

  • Where the property is and what kind of building it is
  • A short video of any fault, such as a noise or a flashing light
  • Any previous service or F-Gas records

Published ranges are a starting point; the quote is built on your property, because no two buildings, rooms or systems are the same. After a look at the job, by pictures or a survey, the price is fixed. To get going, give us a ring on 07833 053749, or email if that’s easier.

A customer’s words

“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”

James T., Crawley, office manager

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead