Essex · Heat pump installation

Heat pump installation in Harold Wood, Essex

Need air source heat pumps in Harold Wood? We diagnose first, fix the price and book the work around you, finishing with proper records.

  • Working out whether radiators need upsizing
  • Questions about listed buildings or conservation areas
  • Deciding on the outdoor unit position

Air source heat pumps across Harold Wood

What happens on the day

You do not need to do much on the day. Someone needs to let us in and show us the units, or where they’re going, and we take it from there. Before we leave, the area is tidied and we explain what we have done. Tell us about any gates or steps at your property near Harold Wood when you book.

  1. We find out about your home and the heating you have now.
  2. A heat loss survey is carried out, room by room.
  3. From those figures we size the heat pump and decide on radiators, cylinder and outdoor position.
  4. Cost, grant and VAT appear on one fixed-price quote.
  5. We install, commission and register the system under MCS.

Before we arrive

  • Keep pets and children away from the work area
  • Make sure we can reach the consumer unit or fuse board
  • Give us access to the outside wall, roof or yard where the outdoor unit sits

How to get a quote

Photos are enough for some jobs; others need a visit first. Multi-room systems, commercial buildings and anything with a long or hidden pipe route are normally surveyed first. Either way, the quote is fixed before anything goes ahead.

Get a quick quote

Advice

Air source heat pumps in Harold Wood

A heat pump takes heat from the outside air and moves it into your home, using electricity to drive the process. It works on the same principle as air conditioning, run the other way and the Energy Saving Trust notes that air-to-air heat pumps are sometimes referred to as air conditioning. If the problem is questions about listed buildings or conservation areas and finding a place for the outdoor unit, we can sort it out.

Homes around Harold Wood typically have space for an outdoor unit and a hot water cylinder, so the main questions are heat loss, radiators and the electrics.

Any work on the refrigerant circuit is recorded: the work carried out, the refrigerant involved and the quantities. File them with the system’s paperwork, ready for the next service or a warranty query.

Location
Harold Wood (RM3, RM11, RM2)
Wider area
Essex
Accreditations
F-Gas certified company, NICEIC approved, MCS
Quotes
Fixed, in writing
Prices
Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
Call
07833 053749
Checked
30 October 2026

When something else is needed

We’ll always give you a straight diagnosis, so here’s what air source heat pumps won’t do:

  • Improving the building’s insulation
  • Any gas work on the existing boiler
  • Grants for hybrid systems or replacements of low-carbon systems

If in doubt, ring us on 07833 053749 or drop us a line and we will say what we think.

Where we work

  • Underfloor heating
  • Hot water cylinders
  • Air-to-water heat pumps
  • Homes heated by oil, LPG or gas
  • Radiator systems
  • Air-to-air heat pumps

Air source heat pumps in Harold Wood: the local picture

At about 15 miles from central London, Harold Wood sits inside the area we cover across London and the South East. About 35% of homes in the Harold Wood area were built between the wars, according to Valuation Office Agency council tax records. Whether the walls and loft have been insulated makes a real difference to the heat pump size for homes of that period.

If your home is listed, like Hare Hall about 1 mile south-west, listed building consent comes before any heat pump work.

Harold Wood is about 2 miles north-east of Romford, in Essex. Harold Wood gets the same approach as every job we take on: diagnosis first, a fixed price and proper paperwork when we’ve finished. In Essex alone we list 644 places, and Harold Wood is one. There’s also a page for London, about 15 miles away.

Not far from Harold Wood, a recent job of ours was on Greenwich High Road, Greenwich (SE10), about 13 miles south-west: installing a Mitsubishi Electric wall-mounted unit in the retail area and a second unit in the stockroom and office.

If your postcode is in RM3, RM11 and RM2, you’re inside the area we cover. Oak Road, Ewan Road and Holt Road and the roads off them are all inside our area. Other places close to Harold Wood include Gallows Corner (1 mile west), Ardleigh Green (1 mile south-west), Gidea Park (1 mile west), Emerson Park (1 mile south) and Heath Park (2 miles south-west). Within a short drive, we also cover Chelmsford (15 miles north-east), Basildon (10 miles east), Harlow (13 miles north) and Brentwood (4 miles north-east).

Landmarks near Harold Wood

Around Harold Wood, our work takes us to homes and businesses near The Morris Dancer Public House, Harold Wood Primary School and Havering College of Further and Higher Education and the streets around them. Harold Wood has its own railway station: Harold Wood station. Nearby you’ll also find Upminster Tithe Barn Museum of Nostalgia (2.1 miles south-east) and The Mercury Mall (2.1 miles south-west). Open spaces near Harold Wood include Hornchurch Cutting.

Map of Harold Wood © OpenStreetMap contributors

How we price air source heat pumps

Typical ranges are on our prices page, and your quote is built on your job. The quote depends on:

  • The pipe route between the units
  • What kind of system it is
  • The condition of any existing system

What you pay depends on the system and the number of rooms or units, how easy the units are to reach and what the work involves. We give you a fixed price before any work starts, so you know where you stand.

What we need to know

Photos let us diagnose from a distance. Try to include:

  • A close-up of the unit’s label showing the model number
  • Any error code or flashing light on the display
  • The address and the type of property

Getting a quote is straightforward. Call or email with a few details and we will come back to you the same working day. Where a survey is needed, we arrange a time that suits you.

Harold Wood questions

Does the Boiler Upgrade Scheme cover homes in Harold Wood?

Harold Wood is in England, where the Boiler Upgrade Scheme runs. The grant is £7,500 for an air source (air-to-water) heat pump and £2,500 for an air-to-air system that replaces the existing fossil-fuel heating. As an MCS certified installer, we apply for it on your behalf.

Is Harold Wood in your area for air source heat pumps?

We do: Harold Wood falls inside our working area. Just call 07833 053749 or drop us a line with a few details.

How long will it take to install a heat pump?

The work takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes. The survey lets us set a firm programme, and you can ring 07833 053749, or email if that’s easier to book it.

How does the warranty work?

The manufacturer provides it, on its own terms. Some brands make regular servicing a condition so it’s worth keeping the service records.

Which manufacturers do you install and repair?

We work with the leading brands, from Mitsubishi Electric, Daikin and Fujitsu to Panasonic, Toshiba, LG, Samsung, Mitsubishi Heavy Industries and Hitachi. Tell us the make and model and we’ll take it from there.

Is a heat pump permitted development?

Often not in England, as many heat pumps on houses are permitted development, if the conditions are met. The outdoor unit must be 1.5 m³ or less, comply with MCS 020(a), not be cooling-only and not be within a listed building’s curtilage.

What’s the difference between air-to-water and air-to-air heat pumps?

Air-to-water feeds your central heating and hot water, while air-to-air warms and cools rooms directly. Air-to-air doesn’t heat hot water and the survey helps decide.

When to call us in Harold Wood

For homes with no mains gas, heated by oil or LPG, a heat pump is well worth considering. Until March 2027, an extra £1,500 is available for air source and ground source heat pumps in homes heated by oil or LPG with no mains gas where the home is eligible.

Keep an eye out for these signs:

  • Questions about the Boiler Upgrade Scheme
  • Checking emitters for a heat pump
  • Questions about where the outdoor unit can go

If your home is near Harold Wood station and heated by a gas boiler, an air-to-water heat pump can replace it where the survey shows it suits.

Comparing quotes

  • Whether they hold F-Gas company certification, not just individual qualifications
  • What paperwork you’ll receive afterwards
  • Which VAT rate the quote uses, and why

Our hiring checklist

From one of our customers

“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”

James T., Crawley, office manager

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead