West Sussex · Heat pump installation

Heat pump installers in Felbridge

Expert air source heat pumps for Felbridge: a survey or diagnosis, a fixed price, careful work and proper paperwork. Ask us for a fixed-price quote.

  • Questions about where the outdoor unit can go
  • Comparing heat pump types
  • Wanting to stop using oil, LPG or gas for heating

Air source heat pumps in Felbridge and nearby

Homes in Felbridge and heat pumps

The Valuation Office Agency’s council tax figures date about 52% of homes in Felbridge and the neighbourhoods around it to the post-war years, 1945 to 1972, and the last census (2021) found about 78% of households in detached or semi-detached houses. For homes of that age, the survey checks the insulation, the radiators and the hot water setup. Detached and semi-detached houses typically have room for the outdoor unit and a cylinder. Historic England lists about 3 buildings and structures within half a mile of the centre of Felbridge, including Park Farm House (grade II). Where a home is affected, the outdoor unit position is settled with the local planning authority (typically Tandridge council) before the heat pump design is finished.

Historic houses such as Saint Hill Manor, about 2.5 miles south-east, are a reminder that listed homes need consent before a heat pump goes in. If your home is one of the older properties near St John's Felbridge, the survey checks whether it’s listed or in a conservation area before the outdoor unit position is chosen.

Felbridge is about 2 miles north-west of East Grinstead, in West Sussex. Across the RH19 area, we cover air source heat pumps. Felbridge is one of 371 towns, villages and districts in West Sussex we cover for homes and businesses.

Our nearest recent job to Felbridge was on Cantelupe Road, East Grinstead (RH19), about 2 miles south-east: installing a Mitsubishi Electric MSZ-LN wall-mounted split system in the master bedroom and a second unit in the open-plan kitchen-diner.

Work in RH19 follows the same survey, fixed-price quote and written records as everywhere else we cover. Whether you are on London Road, Mciver Close and Cherry Way or anywhere close by, our engineers can take on the work. Neighbouring places we cover include Furnace Wood (1 mile west), Domewood (1 mile west), Snow Hill (2 miles west), Newchapel (2 miles north) and Crawley Down (2 miles south-west). Larger places within reach include Crawley (6 miles west), Horsham (13 miles south-west), Haywards Heath (10 miles south) and Burgess Hill (13 miles south).

Landmarks near Felbridge

Typical jobs here are in properties near Bush Davies School of Theatre Arts and Imberhorne School, among other places. For rail, the closest station is East Grinstead station, roughly 1.6 miles south-east. Nearby you’ll also find Effingham Park Motor Museum (1.8 miles west) and Queen Victoria Hospital (2.2 miles east). Green spaces nearby include Hedgecourt Lake.

Map of Felbridge © OpenStreetMap contributors

About our air source heat pumps in Felbridge

Air-to-water heat pumps heat your hot water through a cylinder. If you have a combi boiler and no cylinder, the survey looks at where one could go. With air-to-air, hot water has to come from something else. If the problem is ageing boilers that will need replacing and plans to switch to electric heating with a heat pump, we can help.

Homes around Felbridge normally have room outside for a heat pump, so the design focuses on heat loss and radiators.

We’re an F-Gas certified company, NICEIC approved for electrical work, MCS certified for heat pumps and a Checkatrade member. Our engineers hold the F-gas qualifications needed to work on refrigerant.

Location
Felbridge (RH19)
Region
West Sussex
Certified
F-Gas certified company, NICEIC approved, MCS
Typical price
Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
Quote
Fixed after a survey or pictures
Telephone
07833 053749
Last updated
30 October 2026

What affects the quote in Felbridge

Our prices page gives typical ranges, and your quote is built on your job. What we look at:

  • The type of system, from a single split to a larger system
  • Whether we need access equipment for high-level work
  • The pipe route between the units

The cost depends on the system and the number of rooms or units, the access and the parts and time the job needs. You get a fixed price before any work starts, so you know where you stand.

What to send for a quote

Before you ask for a quote, gather:

  • Any previous service or F-Gas records
  • A photo of the consumer unit with the cover closed
  • Where the property is and what kind of building it is

Every quote starts with a look at the job, either on a site survey or, for simple jobs, from your pictures and details. After that, we send a fixed price before any work starts.

After we’ve gone

Looking after it is simple, and it makes the next visit easier:

  • Keep to regular servicing
  • Keep radiators clear
  • File the MCS certificate safely

Handover includes the controls and how to get the best from a heat pump. Heat pumps tend to work best running steadily rather than in short bursts so we set the controls up with you.

Keep the outdoor unit clear of leaves, plants and stored items. Airflow is what it runs on so keep it unobstructed.

How the job changes from property to property

Heat loss surveys

A heat loss survey measures how much heat each room loses on a cold day. Everything else is sized from it.

Hot water cylinders

The cylinder size depends on how much hot water the household uses.

How the visit works

Where something has to be switched off during the work, we agree it with you first so it does not catch you out. For businesses, we can usually work room by room or zone by zone. On site, it takes from a couple of days to around a week, depending on the system and how much of the heating changes. We agree a date with you and plan the visit to Felbridge so we arrive with what’s needed.

  1. We talk through your home, your current heating and what you want from a heat pump.
  2. A heat loss survey works out how much heat each room needs, and we look at the radiators, the cylinder space and where the outdoor unit could go.
  3. A fixed-price quote follows, setting out the system, any grant that applies and the VAT.
  4. The outdoor unit, the indoor equipment and the controls are installed and connected.
  5. The system is commissioned and registered under MCS, and we show you how to use it.

How to prepare

  • Let us know if the units are on a roof, a high wall or in a locked area
  • Tell us about parking and loading
  • Find the manual or the paperwork for the system, if you have it

Get a fixed-price quote

Quotes don’t take long. Call or email with a few details and we’ll come back to you the same working day. If we need to see the property first, we book a survey at a time that works for you.

Get a price

Related advice

FAQs for Felbridge

Is the heat pump grant available in Felbridge?

Felbridge is covered, as the scheme runs across England and Wales. Air-to-water and ground source systems attract £7,500. Air-to-air gets £2,500, but only where it takes over from fossil-fuel heating and covers the whole home’s heating demand. As an MCS certified installer, we apply for it on your behalf.

Do you cover smaller places like Felbridge?

We do. Villages and hamlets get the same service as the bigger towns. A few photos and the postcode are enough to get things started.

Should I choose air-to-water or air-to-air?

It depends on your home, your heating and whether you want cooling. Air-to-water can attract a £7,500 grant where eligible; air-to-air only qualifies for £2,500 under strict conditions, and we set out the options after the survey.

How long does a heat pump installation take?

As a guide, it takes a few days on site, depending on the cylinder, the radiators and the pipework involved. We plan the work so you’re without heating for as little time as possible, and we explain it in advance.

Does servicing affect my warranty?

It can, for some brands. Send us the make and model and we will tell you what the manufacturer expects and stick to the interval they set.

Can I do any of the installation myself?

The refrigerant side has to be done by a qualified engineer working for an F-Gas certified company. That’s the law, not just our preference, and manufacturers expect it for their warranty too. We’re happy to quote for the full job, supply to commissioning.

Is a heat pump permitted development?

It depends on the property and where the unit goes. Flats have tighter limits, conservation areas add conditions, and Article 4 directions can remove rights, so we check during the survey.

What a customer said

“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”

James T., Crawley, office manager

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead