Hampshire · Heat pump installation
Air Source Heat Pumps in Enham Alamein
Air source heat pumps across Enham Alamein and nearby, from a site survey or diagnosis to sign-off and a fixed price agreed before work begins.
- No space for a hot water cylinder
- An oil, LPG or gas boiler near the end of its life
- Wanting to stop using oil, LPG or gas for heating
Air source heat pumps in Enham Alamein
Air-to-air heat pumps can qualify for a £2,500 Boiler Upgrade Scheme grant, but only in some cases. It has to replace the fossil-fuel heating, cover the whole heating demand, be fitted by an MCS certified installer and be in a home, so an add-on next to a boiler is not eligible. We are often asked to deal with questions about the Boiler Upgrade Scheme and working out where a cylinder could go, on air-to-air heat pumps, air-to-water heat pumps and radiator systems.
Older and listed homes in villages like Enham Alamein need extra care, and permitted development does not cover listed buildings, so consent comes first.
Whatever the visit, you get a written record: commissioning details for an installation, a fault and repair note for a repair, or a record of the service. File it with the manual so it’s to hand next time.
- Where
- Enham Alamein (SP11)
- Wider area
- Hampshire
- Pricing
- Fixed-price quote after a site survey
- Costs
- Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
- Replies
- On the working day you ask
- Certified
- NICEIC and F-Gas, MCS
- Call
- 07833 053749
- Last updated
- 30 October 2026
Why deal with it now?
Choosing between air-to-water and air-to-air is easier with the facts. Air-to-water works with radiators and a cylinder, with a £7,500 grant for eligible homes, while air-to-air heats and cools rooms and has a £2,500 grant only in limited cases, and we explain which fits your home. Planning ahead for a job in Enham Alamein means we can bring everything needed.
Putting several jobs into one visit often makes better use of the time. Tell us about everything you’d like looked at and we’ll price it together.
Why us?
- Covering London and the South East
- We diagnose before we treat
- NICEIC approved for electrical work
- A reply the same working day
What affects the cost of air source heat pumps
Some jobs are bigger than they look, and some smaller. The main factors:
- The equipment or parts the job needs
- What electrical work the job needs
- A single visit or a regular plan
The pipe route, the height of the units and how we reach them can all change the price. Each of those is built into the quote, and the price is fixed before any work starts.
What to send for a quote
Before you ask for a quote, gather:
- Any previous service or F-Gas records
- The rating plate or label on any existing unit
- A short video of any fault, such as a noise or a flashing light
To help us quote: where the property is and what kind of building it is, a few pictures, the make and model of any existing system and any symptoms, from error codes to drips. Then ring us on 07833 053749 or send an email.
Places near Enham Alamein
Also in Enham Alamein
FAQs for Enham Alamein
Is Enham Alamein in your area for air source heat pumps?
We do: Enham Alamein falls inside our working area. Get in touch with the details and we reply the same working day.
Does the Boiler Upgrade Scheme cover homes in Enham Alamein?
Enham Alamein is covered, as the scheme runs across England and Wales. The grant is £7,500 for an air source (air-to-water) heat pump and £2,500 for an air-to-air system that replaces the existing fossil-fuel heating. We hold MCS certification, so the application is ours to make for you.
Can I do any of the installation myself?
Anything that involves the refrigerant needs an F-Gas qualified engineer from a certified company. That is the law, not just our preference, and it also matters for the manufacturer’s warranty. We can quote for the whole job, from supply to commissioning.
Why does F-Gas certification matter?
For refrigerant work, both the engineer and the company need the right F-gas credentials. Ask to see proof before you book anyone and we will gladly show you ours.
Will my radiators work with a heat pump?
The heat loss survey answers that, room by room. Rooms where the radiator is big enough stay as they are and any changes are in the quote.
How do you keep the place clean during the work?
We put dust sheets over floors and furniture near the work first, and we tidy up as we go. At the end, we clear up and show you what we have done.
What does an air-to-water heat pump cost?
For air-to-water, the price is £8,000–£16,000 (0% VAT on homes) before any grant. The Boiler Upgrade Scheme offers £7,500 to eligible homes in England and Wales though not every home qualifies.
The process
Refrigerant work is done by qualified engineers working for an F-Gas certified company, and electrical work is done by us as NICEIC approved contractors. So on the day, you do not need a separate electrician for the electrical side. On site, it takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes. For a village like Enham Alamein, tell us about narrow lanes, gates and parking when you book.
- First, a chat about the property and your goals for the heating.
- A survey covers heat loss, radiators, hot water and where the outdoor unit could sit.
- We explain which type of heat pump suits the home and whether a grant could apply.
- The system is installed and connected to the controls.
- The job ends with commissioning, the MCS certificate and a walk through the controls.
How to prepare
- Let us know if the building has a permit or sign-in process
- Have the make and model of any existing unit to hand
- Clear access to the fuse board
Get a fixed-price quote
Quotes do not take long. Call or email with a few details and we’ll come back to you the same working day. If we need to see the property first, we book a survey at a time that works for you.
Related advice
Air source heat pumps in Enham Alamein: the local picture
About 84% of homes in Enham Alamein and the neighbourhoods around it have been built since 2000, according to VOA council tax data, and the last census (2021) found about 63% of households in detached or semi-detached houses. Newer homes usually lose less heat, which tends to suit a heat pump well. Detached and semi-detached houses usually have room for the outdoor unit and a cylinder. At about 62 miles from central London, Enham Alamein sits inside the area we cover across London and the South East.
Every heat pump design starts with a room-by-room heat loss calculation. Older homes near Saint George may need extra checks for planning and heat loss before a heat pump is designed.
Enham Alamein is about 2 miles north of Andover, in Hampshire. We cover Enham Alamein for air source heat pumps, along with the rest of Hampshire. Our list for Hampshire has 683 entries and Enham Alamein is among them. Guildford, roughly 39 miles off, has its own page on this site.
Local streets include Newbury Road, Montgomery Road and Kings Road, all of which are in our area. Our working area takes in SP11 in full. Close to Enham Alamein, our area also takes in Upper Enham (1 mile north), Knights Enham (1 mile south), Little London (1 mile north-east), Smannell (1 mile east) and East Anton (1 mile south). We also work in nearby towns such as Winchester (14 miles south-east), Hyde (14 miles south-east), Tidworth (8 miles west) and Weeke (13 miles south-east).
What’s near Enham Alamein
We fit and service air conditioning in homes and premises around The Hare & Hounds pub and Harrow Way Community School, among other places. For rail, the closest station is Andover station, roughly 2.2 miles south. A little further out are Andover War Memorial Hospital (2 miles south-west) and Finkley Down Farm Museum (1.7 miles south-east). Open spaces near Enham Alamein include Mill Lake and Anton Lakes.
Safe owner checks
Never try to top up, release or handle refrigerant yourself. Under the F-gas rules, engineers need their own qualifications and the company must be certified, and escaping refrigerant can cause cold burns. If you suspect a leak, switch the system off and call us.
On air conditioning, the filters in the indoor unit are normally the one part owners can clean, if the manual says so. They come out, get a gentle clean and go back only when they’re dry. For a heat pump, the main owner jobs are a clear outdoor unit and sensible control settings.
A customer’s words
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead