Hampshire · Heat pump installation
Heat pump installers in East Anton
Air source heat pumps in East Anton from an F-Gas certified company, with the manufacturer’s warranty terms explained on your quote. We reply to enquiries the same working day.
- Not knowing whether a grant applies
- Choosing between air-to-water and air-to-air
- Radiators that may be too small for a heat pump
What you can do yourself, and what needs us
For air conditioning, cleaning the indoor unit’s filters is the main job owners can do where the manufacturer’s manual explains how. They come out, get a gentle clean and go back only when they’re dry. For a heat pump, the main owner jobs are a clear outdoor unit and sensible control settings.
Owner care supports servicing; it does not replace it. Simple care keeps the air moving through the system, but the inside of the units, the refrigerant and the electrics still need a qualified engineer.
Air source heat pumps for homes and businesses in East Anton
Every installation starts with a heat loss survey. It shows how much heat each room needs on a cold day, so the heat pump and the radiators or indoor units can be sized properly. Sizing by rule of thumb is not good enough. The work covers underfloor heating, homes heated by oil, LPG or gas and radiator systems, and the jobs we see most are a boiler that’s getting old and no space for a hot water cylinder.
Whether a home near East Anton has mains gas makes a difference to the grant. Homes heated by oil or LPG with no mains gas can get an extra £1,500 on the Boiler Upgrade Scheme until March 2027, for an air source or ground source heat pump.
Looking after a system is mostly common sense: keep the outdoor unit clear, follow the manufacturer’s guidance on cleaning and book a service at the interval they recommend. That also helps where the warranty terms ask for regular servicing.
- Place
- East Anton (SP11)
- Wider area
- Hampshire
- Costs
- £8,000–£16,000 (0% VAT on homes), before the grant
- Pricing
- Fixed after a survey or pictures
- Accreditations
- F-Gas certified company, NICEIC approved, MCS
- Telephone
- 07833 053749
- Page updated
- 30 October 2026
Nearby places to East Anton
What else we do in East Anton
Let and managed properties
Facilities teams in offices, schools and public buildings book us too in East Anton and across Hampshire. Larger buildings can be done in stages around the people who use them.
The F-gas rules share responsibility for leak checking between the equipment’s operator and the service technicians. In a let or managed building, it’s worth agreeing who that operator is and we’re happy to deal with whoever it is.
The process
Protection comes first: sheets over the floor and any furniture nearby and nothing is moved without asking you. Then the electrics are made safe and the work begins. It takes from a couple of days to around a week, depending on the system and how much of the heating changes, and we clear up before we go. Photos of the room and the outside wall help us plan a job near East Anton.
- First we find out about the property, the heating you have now and what you are hoping for.
- We survey the home room by room for heat loss, and check the emitters, hot water and outdoor unit position.
- A fixed-price quote follows, setting out the system, any grant that applies and the VAT.
- We fit the outdoor unit and connect it to the heating, hot water and controls.
- Commissioning, MCS certification and a handover of the controls finish the job.
Preparing for the visit
- Name a contact who can meet us at the agreed time
- Tell us about any building rules, permits or sign-in
- Mention any roof access, ladders or high-level work
Getting a price
To help us quote: where the property is and what kind of building it is, a few photos, the make and model of any existing system and anything you’ve noticed, such as an error code or a noise. Then ring us on 07833 053749 or fill in the contact form.
Advice
Heat pumps in East Anton: local notes
About 47% of homes in East Anton and the neighbourhoods around it have been built since 2000, according to VOA council tax data, and about 40% of households live in terraced houses, according to the 2021 Census. Better insulated, newer homes are often a good match for a heat pump. Terraced houses share walls with neighbours, which helps, but the outdoor unit position needs care with noise next door.
Sizing comes from the heat each room loses on a cold day, not from the size of the old boiler. Older homes near St Paul Church Centre may need extra checks for planning and heat loss before a heat pump is designed.
East Anton is about 1 mile north-east of Andover, in Hampshire. From the centre of East Anton to the outskirts, we cover air source heat pumps, from a single room to a whole building. Our list for Hampshire has 683 entries and East Anton is among them. Our Guildford page covers places nearby, about 39 miles away.
From Cobb Drive, Long Barn Road and Pasture Walk to the smaller roads in between, nowhere is left out. We cover every part of the SP11 postcode area for air source heat pumps and the roads nearby. Places around East Anton that are also on our list: Knights Enham (1 mile north-west), Finkley (1 mile north-east), Finkley Down (1 mile south-east), Smannell (1 mile north-east) and Enham Alamein (1 mile north). We also work in nearby towns such as Winchester (13 miles south-east), Hyde (13 miles south-east), Tidworth (9 miles west) and Weeke (12 miles south-east).
Landmarks near East Anton
Typical jobs here are in properties near Winton Community Academy, The Oak pub and Winton Community Academy, among other places. The closest station to East Anton is Andover station, roughly 1.6 miles south-west. A little further out are Andover War Memorial Hospital (1.5 miles south-west) and Finkley Down Farm Museum (0.6 miles south-east). For a walk, there’s Mill Lake and Anton Lakes.
How we price air source heat pumps
The quote reflects the job in front of us. We consider:
- The pipe route between the units
- A single visit or a regular plan
- The equipment or parts the job needs
Our prices page shows typical ranges, but each job is priced on what it involves. Call for a fixed-price quote, and we will explain what it covers.
What we need to know
When you call or email, these details help:
- Any previous service or F-Gas records
- The address and the type of property
- The outside wall, roof or yard where the outdoor unit sits or would go
Photos are enough for some jobs; others need a visit first. Multi-room systems, commercial buildings and anything with a long or hidden pipe route are normally surveyed first. Either way, the quote is fixed before anything goes ahead.
FAQs for East Anton
Is the heat pump grant available in East Anton?
Yes, if the home and the heat pump meet the scheme’s rules: East Anton is in England, where it applies. For an air-to-water heat pump the amount is £7,500; an air-to-air system can get £2,500 if it replaces the fossil-fuel heating outright, meets the home’s full heating demand and isn’t an add-on to a boiler. You do not apply yourself: the MCS certified installer does, which is us.
Will a heat pump in East Anton need planning permission?
That depends on the building and where the outdoor unit goes. Historic England lists about 4 buildings and structures within half a mile of the centre of East Anton. Heat pumps on houses are often permitted development, but listed buildings need consent and conservation areas restrict outdoor units facing a road. Where it’s needed, we check with the planning department at Test Valley council, typically the authority for East Anton.
Which accreditations do you hold?
F-Gas company certification, NICEIC approval for electrical work and MCS certification for heat pumps, and we’re Checkatrade members. Our engineers also hold the individual F-gas qualifications needed to work on refrigerant.
Do you work for landlords and businesses?
Yes. From a single let flat to offices, shops and public buildings, we work the same way: a look first, a fixed-price quote and written records.
Do you work on all makes?
The main ones, including Mitsubishi Electric, Daikin, Fujitsu, Panasonic, Toshiba, LG, Samsung, Mitsubishi Heavy Industries and Hitachi. For new systems, we recommend a brand and model to suit the job and explain why.
Can I do the refrigerant work myself?
Anything that involves the refrigerant needs an F-Gas qualified engineer from a certified company. That’s the law, not just our preference, and manufacturers expect it for their warranty too. We can quote for the whole job, from supply to commissioning.
What warranty do I get?
Warranty is the manufacturer’s own, on its terms. Each brand sets its own conditions and periods, so we explain them on your quote.
What a customer said
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead