Kent · Heat pump installation
Heat pump installation in Dargate, Kent
Air source heat pumps in Dargate from an F-Gas certified company, with the manufacturer’s warranty terms explained on your quote. Enquiries answered the same working day.
- Choosing between air-to-water and air-to-air
- Questions about where the outdoor unit can go
- A boiler that’s getting old
Keeping the system healthy
How well a system lasts depends on use and care. We suggest:
- Check eligibility for the Boiler Upgrade Scheme early
- Keep the MCS certificate with the manufacturer’s paperwork
- Look at insulation alongside the heat pump
After commissioning, the installation is registered under MCS and you receive the certificate. File it with the warranty documents for future reference.
Book a service every year. Check the manufacturer’s terms, as they may include servicing conditions.
Air source heat pumps in Dargate
An air-to-water heat pump costs £8,000–£16,000 (0% VAT on homes), before the grant. The Boiler Upgrade Scheme can provide £7,500 towards an eligible air-to-water system in England and Wales and the installer makes the application. Not every home qualifies, so we check eligibility before you commit. Typical jobs include plans to switch to electric heating with a heat pump and replacing a combi boiler with a heat pump, on underfloor heating, homes heated by oil, LPG or gas and radiator systems.
For a home around Dargate that is off mains gas and heated by oil or LPG, the Boiler Upgrade Scheme adds an extra £1,500 until March 2027 for an air source or ground source heat pump, on top of the £7,500.
Looking after a system is mostly common sense: clear space around the outdoor unit, the cleaning the manual describes and a service at the recommended interval. It also keeps you on the right side of any warranty terms that ask for servicing.
- Where
- Dargate (ME13)
- Region
- Kent
- Pricing
- Fixed, in writing
- Accreditations
- F-Gas certified, NICEIC approved, MCS
- Price guide
- £8,000–£16,000 before the grant, 0% VAT on homes
- Telephone
- 07833 053749
- Reviewed
- 30 October 2026
Towns and villages near Dargate
Other services in Dargate
Leave it or put it right?
Replacing a boiler in a hurry when it breaks leaves little time to consider a heat pump. Surveying and designing in advance means the system is sized right and any grant is applied for while the old heating still works. Waiting rarely makes an air conditioning problem smaller.
Homes, offices, shops and public buildings are all priced the same way: the equipment, the access, the work involved and the time it takes. Ask for a fixed-price quote and we’ll go through it with you.
Why people in Dargate choose us
- Electrical work covered by our NICEIC approval
- A 24/7 emergency line
- Listed on Checkatrade
- Enquiries answered the same working day
Take a look at our cost guide or how to check a contractor.
Let and managed properties
The F-gas rules share responsibility for leak checking between the equipment’s operator and the service technicians. In a let or managed building, it’s worth agreeing who that operator is, and we can work for either side.
When the building owner and the occupier are different, the lease or tenancy agreement normally sets out who maintains what. We’re happy to deal with either side and send the records to whoever needs them.
Your questions about air source heat pumps in Dargate
Does being near the sea make a difference to air source heat pumps in Dargate?
It can, as Dargate is within about 3 miles of the sea, where salt in the air is hard on coils and fixings. We site outdoor units out of the worst of the sea wind where possible and can suggest models with corrosion protection where the manufacturer offers it.
Can I get the Boiler Upgrade Scheme grant in Dargate?
Yes, the scheme covers homes in England, including Dargate, if they qualify. For an air-to-water heat pump the amount is £7,500; an air-to-air system can get £2,500 if it replaces the fossil-fuel heating outright, meets the home’s full heating demand and is not an add-on to a boiler. We hold MCS certification, so the application is ours to make for you.
Will I get records for the system?
Yes, on every job. New installations come with commissioning details, F-Gas records and warranty information, and repairs and services get a record of the work.
Can you set up regular servicing?
Yes. We offer maintenance contracts, with visits at the interval your system and the manufacturer need. Each visit is written up, with F-Gas records where refrigerant work is involved.
Will my radiators work with a heat pump?
We find out during the survey. Where a radiator is already large enough, it stays and any changes are in the quote.
Do you protect the property while you work?
Protection goes down first: dust sheets over floors and anything close to the work. Holes and fixings are agreed with you, and we clean up afterwards when we finish.
Is the equipment covered by a warranty?
Warranty is the manufacturer’s own, on its terms. Terms differ by brand, and we set them out on your quote.
What we do, step by step
The visit goes in the diary at a time that works for you, and we let you know if plans need to move. On arrival, the engineer compares the job with the survey, your photos or the details you gave us. If something is different, we talk it through with you before carrying on. After that, it takes a few days for most air-to-water installations, with air-to-air systems often quicker. Visits to Dargate are agreed with you in advance and planned so the job can be finished in one trip where possible.
- It begins with your house and the heating it relies on now.
- Every room’s heat loss is worked out on site.
- We design the system, check the radiators and cylinder and look at the outdoor unit position.
- You get a fixed price, with any grant and the VAT set out.
- Then it’s fitted, commissioned and registered with MCS.
Before we arrive
- Mention any parking restrictions near the property
- Have the make and model of any existing unit to hand
- Mention any managing agent or landlord rules we need to follow
Getting a quote
Photos are the fastest route to a quote: the inside and outside of the property where the work is, plus the rating plate of any unit already there. Add the address and what you’d like done, and many jobs can be priced from that.
Related advice
Air source heat pumps in Dargate: the local picture
Dargate lies within about 3 miles of the sea. Salt air is hard on outdoor units, so a heat pump near the sea needs a sensible position and regular checks, and some models offer corrosion protection for coastal sites. About 39% of homes in and around Dargate were built before 1919, according to VOA council tax data, and about 74% of households live in detached or semi-detached houses, according to Census 2021 figures. In older homes, the heat loss calculation is especially important, as solid walls and draughts change the size of heat pump needed. Houses typically have space for an outdoor unit and a hot water cylinder. The Dargate, Hernhill Conservation Area is within about a third of a mile of the centre of Dargate. There are 2 conservation areas within a mile of the centre of Dargate. Historic England lists about 5 buildings and structures within half a mile of the centre of Dargate, including Dargate House (grade II*). That affects heat pumps: listed buildings need consent, and conservation areas limit where the outdoor unit can go under permitted development. Where necessary, we check with the local planning authority (usually Swale council).
A heat loss calculation decides the size of heat pump your home needs. Live in one of the older houses around Church of St Michael? Expect the survey to look closely at heat loss and at the building’s planning status.
Dargate is about 4 miles south-west of Whitstable, in Kent. Our engineers cover Dargate for air source heat pumps and across the rest of Kent. Our area takes in 922 places across Kent, from busy centres to quieter spots. There’s also a page for Bromley, roughly 42 miles from Dargate.
Butler's Hill and Plumpudding Lane and the roads off them are all inside our area. Our engineers cover all of the ME13 postcode area for air source heat pumps. Neighbouring places we cover include Hernhill (1 mile south-west), Waterham (1 mile north), Highstreet (1 mile north-east), Slutshole (1 mile south-west) and Staplestreet (1 mile south-west). Within a short drive, we also cover Ashford (13 miles south), Canterbury (5 miles south-east), Sittingbourne (11 miles west) and Whitstable (4 miles north-east).
Local landmarks in Dargate
Typical jobs here are in properties near Red Lion pub and Mount Ephraim Gardens. Dargate’s nearest station is Selling station, roughly 3 miles south-west. A little further out are Whitstable and Tankerton Hospital (4.5 miles north-east) and Tankerton Castle (4.2 miles north-east). Green spaces nearby include Blean Woods RSPB Reserve.
From one of our customers
“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”
David W., Haywards Heath