Surrey · Heat pump installation

Crosswater air source heat pumps

Air source heat pumps for Crosswater, from F-Gas certified engineers, with the manufacturer’s warranty terms explained on your quote. Enquiries answered the same working day.

  • An oil, LPG or gas boiler near the end of its life
  • Moving away from fossil-fuel heating
  • Questions about listed buildings or conservation areas

Air source heat pumps for Crosswater

How it works

Our engineers arrive at the time agreed with you and check the plan with you first. Floors and furniture near the work are covered with dust sheets, and the electrics are made safe before any panel comes off. On site, it takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes. If a lane or gateway near Crosswater is tight for a van, let us know and we’ll plan for it.

  1. First we talk through the property and the current system.
  2. A heat loss survey is carried out, room by room.
  3. We design the system, check the radiators and cylinder and look at the outdoor unit position.
  4. A fixed-price quote explains the cost, the grant position and the VAT.
  5. Then it’s fitted, commissioned and registered with MCS.

How to prepare

  • Move furniture away from the wall where we will be working
  • Mention any parking restrictions near the property
  • Dig out any previous service or F-Gas records

Getting a quote

Here’s what helps us quote: the address and the type of property, a few pictures, the make and model of any existing system and any symptoms, from error codes to drips. Then ring us on 07833 053749 or fill in the contact form.

Get a quick quote

Read more

How we handle air source heat pumps in Crosswater

In England, an air source heat pump on a house can often go in under permitted development rights. Conditions include a maximum outdoor unit size of 1.5 m³, compliance with MCS 020(a), use for more than cooling alone and a site outside the curtilage of a listed building. We check the rules for your property as part of the survey. The work covers hot water cylinders, air-to-air heat pumps and homes heated by oil, LPG or gas, and people most often call us about working out whether radiators need upsizing and deciding which kind of heat pump suits the home.

Homes around Crosswater typically have room outside for a heat pump, so the design comes down to heat loss, radiators and hot water.

Warranty periods vary by brand and by product. Daikin, for instance, gives a standard 2 years on split air conditioning, with longer extensions only on its air-to-water heat pumps. Whatever the brand, the manufacturer’s terms are explained on your quote.

Where
Crosswater (GU10)
Region
Surrey
Typical price
£8,000–£16,000 (0% VAT on homes), before the grant
Certified
NICEIC approved, F-Gas certified, MCS
Pricing
Fixed, in writing
Response
Same working day
Phone
07833 053749
Updated
30 October 2026

Homes in Crosswater and heat pumps

About 38 miles out from central London, Crosswater is part of the South East area we work across. The last census (2021) found about 73% of households in detached or semi-detached houses. Houses normally have space for an outdoor unit and a hot water cylinder.

Farnham Castle, roughly 4.9 miles north, is a reminder to check your home’s listing status: permitted development does not cover listed buildings.

Crosswater is about 4 miles south of Farnham, in Surrey. Crosswater gets the same approach as every job we take on: diagnosis first, a fixed price and proper paperwork when we have finished. In Surrey alone we list 395 places, and Crosswater is one. The nearest of our city pages is Guildford, around 11 miles from Crosswater.

Our nearest recent job to Crosswater was on Castle Street, Farnham (GU9), about 4 miles north: installing a Fujitsu multi-split system serving three offices and a client meeting room.

Work in GU10 follows the same survey, fixed-price quote and written records as everywhere else we cover. Close to Crosswater, our area also takes in Churt (1 mile south), Green Cross (1 mile south-east), Frensham (1 mile north-west), Barford (1 mile south) and Rushmoor (1 mile north-east). Within a short drive, we also cover Guildford (11 miles north-east), Woking (15 miles north-east), Camberley (13 miles north) and Farnham (4 miles north).

Around Crosswater

We fit and service air conditioning in homes and premises around Crossways Inn and The Flashes, among other places. Crosswater’s nearest station is Farnham station, about 4.3 miles north of the centre. Nearby you will also find Farnham Castle (4.9 miles north) and Chase Community Hospital (4.7 miles south-west). For a walk, there’s Gibbet Hill and Upper Lake.

Map of Crosswater © OpenStreetMap contributors

Common problems we fix in Crosswater

Some homes heated by electric heaters or storage heaters consider a heat pump instead. The survey tells you whether it’s practical and what’s involved along with whether any grant could apply.

Most people get in touch when they notice one of these:

  • Choosing between air-to-water and air-to-air
  • Questions about the Boiler Upgrade Scheme
  • Radiators that may be too small for a heat pump

Live in one of the older houses around St John the Evangelist? Expect the survey to look closely at heat loss and at the building’s planning status.

Comparing quotes

  • Whether they hold F-Gas company certification, not just individual qualifications
  • How VAT is shown, and which rate applies
  • Exactly what the price includes, from supply and fitting to commissioning

Questions to ask before booking

FAQs for Crosswater

Do you cover smaller places like Crosswater?

Yes, smaller places are covered as well as towns. A few photos and the postcode are enough to get things started.

Is the heat pump grant available in Crosswater?

Yes, if the home and the heat pump meet the scheme’s rules: Crosswater is in England, where it applies. The amount depends on the type of heat pump, and the survey confirms which applies. We hold MCS certification, so the application is ours to make for you.

Can you look at a system you didn’t fit?

Yes. We look at it first and tell you what we find, including any issues with how it was fitted. You get a fixed price before any work goes ahead.

Will I need planning consent for an air source heat pump?

In England, many air source heat pumps on houses can be permitted development provided the conditions are met. The outdoor unit must be 1.5 m³ or less, comply with MCS 020(a), not be cooling-only and not be within a listed building’s curtilage.

Should I choose air-to-water or air-to-air?

Air-to-water heats radiators or underfloor heating and hot water; air-to-air heats rooms through indoor units and can cool them. Air-to-air doesn’t heat hot water, and we explain which suits your home.

What does an air-to-water heat pump cost?

For air-to-water, the price is £8,000–£16,000 (0% VAT on homes) before any grant. Eligible homes in England and Wales can get £7,500 through the Boiler Upgrade Scheme though not every home qualifies.

Who is responsible for leak checks?

The operator of the equipment, working with qualified engineers. Systems below 5 tCO2e fall outside the set leak check intervals, while larger ones need checks at least every 12 months, or every 6 months from 50 tCO2e. We’ll work out which band applies to yours.

Landlords, agents and facilities managers

Bigger systems bring extra duties: a TM44 inspection by an accredited energy assessor is required at least every 5 years for systems over 12 kW. We arrange the inspection, get the system ready and put right anything it picks up.

When the building owner and the occupier are different, the lease or tenancy agreement normally sets out who maintains what. We’re happy to deal with either side and send the records to whoever needs them.

What you can do yourself, and what needs us

Owners can handle the everyday basics: keeping the outdoor unit clear, checking the mode and set temperature, and the routine cleaning in the manual. Anything inside the units, the electrics and the refrigerant is engineer’s work.

Don’t move, re-route or disconnect units or pipework yourself. Moving a unit involves the refrigerant circuit, so it needs an F-Gas qualified engineer, and the electrics need care too. If you need something moved, we can quote for it.

From one of our customers

“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”

David W., Haywards Heath

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead