Surrey · Heat pump installation
Air Source Heat Pumps in Millbridge
For air source heat pumps in Millbridge, choose an F-Gas certified, NICEIC approved company. A fixed price before any work starts, and a 24/7 emergency line.
- A boiler that is getting old
- Wanting to stop using oil, LPG or gas for heating
- Finding a place for the outdoor unit
Millbridge: your questions answered
Do you cover smaller places like Millbridge?
Yes, and the size of the place makes no difference to how we work. Send a few details and pictures, and we reply the same working day.
Can I get the Boiler Upgrade Scheme grant in Millbridge?
Yes, the scheme covers homes in England, including Millbridge, if they qualify. The grant is £7,500 for an air source (air-to-water) heat pump and £2,500 for an air-to-air system that replaces the existing fossil-fuel heating. The installer applies, and we are MCS certified.
Will skipping a service affect the warranty?
Each manufacturer decides. Where servicing is a condition, a missed service could give the manufacturer grounds to refuse a claim and we’ll tell you what your brand asks for.
Who has to arrange F-Gas leak checks?
Responsibility is shared between the operator, typically whoever owns or controls the equipment, and the service technicians. The interval depends on the refrigerant charge, measured in tonnes of CO2 equivalent: at least every 12 months from 5 tCO2e, and every 6 months from 50 tCO2e.
How do you keep the place clean during the work?
Protection goes down first: dust sheets over floors and anything close to the work. Any drilling is agreed with you first, and we clear up the dust and offcuts before we leave.
How much time does a heat pump install need?
As a guide, it takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes. The programme is planned to keep time without heating short, and we explain it in advance.
Do you provide F-Gas records?
Yes. You get a written record of every visit, including F-Gas records for any refrigerant work. File them with the system’s paperwork.
Air source heat pumps in Millbridge
Hot water from an air-to-water system is stored in a cylinder. If you have a combi boiler and no cylinder, the survey looks at where one could go. Air-to-air systems do not heat hot water, so you will need another way to do that. The work covers radiator systems, homes heated by oil, LPG or gas and air-to-water heat pumps, and common reasons people get in touch are working out where a cylinder could go and checking emitters for a heat pump.
Older and listed homes in villages like Millbridge need extra care, because permitted development does not apply within the grounds of a listed building, so consent comes first.
Looking after a system is mostly common sense: keep the outdoor unit clear, follow the manufacturer’s guidance on cleaning and book a service at the interval they recommend. That also helps where the warranty terms ask for regular servicing.
- Where
- Millbridge (GU10)
- Region
- Surrey
- Guide price
- £8,000–£16,000 before the grant, 0% VAT on homes
- Enquiries
- We reply the same working day
- Price
- Fixed-price quote after a site survey
- Certified
- F-Gas certified, NICEIC approved, MCS
- Call
- 07833 053749
- Updated
- 30 October 2026
Also near Millbridge
Also in Millbridge
Different systems, different jobs
Hot water cylinders
Hot water from an air-to-water system is stored in a cylinder. The survey looks at where it can go particularly in homes with a combi boiler.
Outdoor unit position and planning
Flats and blocks of flats have different limits, and Article 4 directions can remove rights. Listed buildings also need separate consent and we check what applies to you.
How it works
Refrigerant work is done by qualified engineers working for an F-Gas certified company, while the electrical side is covered by our NICEIC approval. So on the day, you do not need a separate electrician for the electrical side. The work takes a few days on site, depending on the cylinder, the radiators and the pipework involved. Pictures of the space and where the outdoor unit could go let us plan the work in Millbridge.
- We talk through your home, your current heating and what you want from a heat pump.
- The survey measures heat loss room by room and looks at radiators, hot water and the best spot for the outdoor unit.
- You get a fixed-price quote, with any grant you are eligible for and the VAT explained.
- We fit the outdoor unit and connect it to the heating, hot water and controls.
- Once it’s running correctly, the MCS certificate is issued and we show you the settings.
Getting ready for the visit
- Name a contact who can meet us at the agreed time
- Make sure we can reach the consumer unit or fuse board
- Let us know if the building has a permit or sign-in process
Get a fixed-price quote
If you need air source heat pumps in Millbridge, call us on 07833 053749 or send an email. Let us know the type of property and what you need, and send a few photos if you can. We reply the same working day.
Read more
Homes in Millbridge and heat pumps
The 2021 Census found about 75% of households in detached or semi-detached houses. Detached and semi-detached houses normally have room for the outdoor unit and a cylinder. Central Millbridge is inside the Millbridge Conservation Area. Draw a one-mile circle round the middle of Millbridge and it takes in 2 conservation areas. Listed buildings are part of the picture here: about 11 within half a mile of the centre, such as Pierrepont School (grade II*). Where a home is affected, the outdoor unit position is settled with the local planning authority (normally Waverley council) before the heat pump design is finished.
Farnham Castle lies about 3.1 miles north. Owners of listed homes need consent before a heat pump is fitted, so it’s one of our first questions. Live in one of the older houses around Church of St Mary the Virgin? Expect the survey to look closely at heat loss and at the building’s planning status.
Millbridge is about 2 miles south of Farnham, in Surrey. Homes and businesses alike in Millbridge, our engineers can help with air source heat pumps. You’ll hear back from us the same working day, and there’s a 24/7 emergency line. 395 places in Surrey are on our list, from busy centres to quieter spots. Guildford is in our area too, about 11 miles from Millbridge.
Our nearest recent job to Millbridge was on Castle Street, Farnham (GU9), about 2 miles north: installing a Fujitsu multi-split system serving three offices and a client meeting room.
Our working area takes in GU10. From Shortfield Common Road, The Reeds Road and Fifield Lane to the smaller roads in between, the whole area is covered. Nearby, we also cover air source heat pumps in Shortfield Common (1 mile west), Frensham (1 mile south), Tilford Reeds (1 mile north-east), Lower Bourne (2 miles north) and Tilford Common (2 miles east). Within a short drive, we also cover Guildford (11 miles north-east), Woking (14 miles north-east), Camberley (11 miles north) and Frimley (10 miles north).
Around Millbridge
We fit and service air conditioning in homes and premises around Edgeborough School, Weydon School and Underdown nature reserve. The nearest railway station is Farnham station, roughly 2.6 miles north of the centre. Nearby you will also find Museum of Farnham (2.7 miles north) and Farnham Castle (3.1 miles north). Green spaces nearby include Culverswell Hill and Farnham Heath.
Let and managed properties
From a single flat to a whole estate, the approach is the same: diagnosis, a fixed price, access agreed with the people on site and paperwork at the end.
Bigger systems bring extra duties: systems with an effective rated output over 12 kW need a TM44 inspection by an accredited energy assessor at least every 5 years. We can arrange it, prepare the system for it and fix what it finds.
Fixed-price quotes for air source heat pumps in Millbridge
Before we fix a price, we need to know a few things. We look at:
- How easy the units are to reach
- The brand, model and parts involved
- The size of the job
The price reflects the work, not guesswork. That’s why we look at the job first, from pictures or on a survey, and the price is agreed before any work starts.
Helping us quote
Photos and a few facts are often enough to price a simple job. Send what you can of the following:
- The paperwork from the last service, if you have it
- The fuse board and where it is in the property
- The remote or wall controller showing any error
VAT is set out clearly on every quote, and the rate that applies to your job is stated. Homes, businesses and different kinds of work can be treated differently for VAT, so we confirm it in writing rather than guess. For a fixed-price quote, phone us on 07833 053749 or email us.
What a customer said
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager