Surrey · Heat pump installation
Cramhurst air source heat pumps
For air source heat pumps in Cramhurst, choose an F-Gas certified, NICEIC approved company. Fixed-price quotes and a 24/7 emergency line.
- Not knowing whether a grant applies
- Checking emitters for a heat pump
- Finding a place for the outdoor unit
Air source heat pumps for homes and businesses in Cramhurst
Air source heat pumps collect heat from outdoor air and bring it inside, using electricity to drive the process. It works on the same principle as air conditioning, run the other way and the Energy Saving Trust notes that air-to-air heat pumps are sometimes referred to as air conditioning. If the problem is checking eligibility for a heat pump grant and ageing boilers that will need replacing, we can sort it out.
Older and listed homes in villages like Cramhurst need extra care, because permitted development doesn’t apply within the grounds of a listed building, so consent comes first.
Nothing is signed off by word of mouth: commissioning details and F-Gas records for a new system, a note of the fault and the fix for a repair, or a service record. Keep it with the system’s paperwork, because it helps with any later warranty question.
- Place
- Cramhurst (GU8)
- Region
- Surrey
- Price
- Fixed after a survey or photos
- Accreditations
- F-Gas certified, NICEIC approved, MCS
- Costs
- £8,000–£16,000 (0% VAT on homes), before the grant
- Call
- 07833 053749
- Page updated
- 30 October 2026
Looking after it afterwards
A little care keeps the system in better shape. Our advice:
- Don’t block radiators or indoor units with furniture
- Ask about the grant before you commit
- Clear leaves and debris from the outdoor unit
We show you how to use the controls and explain how a heat pump works differently from a boiler. Steady running suits a heat pump better than switching on and off so we set the controls up with you.
Don’t cover radiators with furniture or heavy curtains so the heat can get into the room.
What happens on the day
The visit goes in the diary at a time that works for you, and we let you know if plans need to move. When we arrive, we check the job against the survey or the photos you sent. If something is different, we talk it through with you before carrying on. After that, it takes a few days on site, depending on the cylinder, the radiators and the pipework involved. Visits to Cramhurst are agreed with you in advance and planned so the job can be finished in one trip where possible.
- You tell us about the home and what you want from a heat pump.
- We survey for heat loss and look at radiators, cylinder space and outdoor unit options.
- We explain which type of heat pump suits the home and whether a grant could apply.
- We install the heat pump and connect it up.
- We commission it, complete the MCS certificate and show you how to use it.
Before we arrive
- Find the manual or the paperwork for the system, if you have it
- Let us know if the building has a permit or sign-in process
- Name a contact who can meet us at the agreed time
Ask for a quote
To get a fixed-price quote, ring 07833 053749 or send an email with the address and a few details about the rooms or units involved. Photos help a lot. We reply to enquiries the same working day.
Advice
When something else is needed
In fairness, some problems need a different answer:
- Insulation work, such as loft or cavity wall insulation
- Grants for hybrid systems or replacements of low-carbon systems
- Planning approval where permitted development doesn’t apply
If you’re not sure, just ring 07833 053749 or use the quote form and we will give you a straight answer before you book.
Where we work
- Air-to-air heat pumps
- Air-to-water heat pumps
- Underfloor heating
- Hot water cylinders
- Homes heated by oil, LPG or gas
- Radiator systems
Also near Cramhurst
More services for Cramhurst
Heat pumps in Cramhurst: local notes
About 35% of homes in Cramhurst and the neighbourhoods around it were built before 1919, according to Valuation Office Agency council tax records, and the 2021 Census found about 76% of households in detached or semi-detached houses. In older homes, the heat loss calculation is especially important, as solid walls and draughts change the size of heat pump needed. Houses typically have space for an outdoor unit and a hot water cylinder.
If your home is near Milford (Surrey) station and heated by a gas boiler, an air-to-water heat pump can replace it where the survey shows it suits. Period properties close to St John the Evangelist's Church can suit a heat pump, though insulation and any heritage protection are checked first.
Cramhurst is about 7 miles south-west of Guildford, in Surrey. Whatever kind of property you have in Cramhurst, we can help with air source heat pumps. You’ll hear back from us the same working day, and there’s a 24/7 emergency line. Cramhurst is one of 395 places in Surrey where we work for homes and businesses. Our Guildford page covers places nearby, about 7 miles away.
Not far from Cramhurst, a recent job of ours was on Bridge Road, Godalming (GU7), about 2 miles north-east: installing a Panasonic split system in the garden office and a second unit in the master bedroom.
Our engineers cover all of the GU8 postcode area for air source heat pumps and the roads nearby. Merryacres, Martins Wood and Cramhurst Lane and the roads off them are all inside our area. If you’re just outside Cramhurst, we cover Witley (1 mile south), Mousehill (1 mile north), Ockford Ridge (1 mile east), Milford (1 mile north) and Enton Green (1 mile east). Further out, we also cover Guildford (7 miles north-east), Woking (11 miles north), Camberley (12 miles north) and Farnham (7 miles north-west).
What’s near Cramhurst
Around Cramhurst, our work takes us to homes and businesses near The Star Public House, Rodborough Common and The Chandler CofE Aided Junior School. The closest station to Cramhurst is Milford (Surrey) station, about 0.8 miles east of the centre. Nearby you will also find Godalming Museum (2.4 miles north-east) and Milford Hospital (1.3 miles east). Open spaces near Cramhurst include Hydon's Ball and Farncombe Wood.
Rented and managed buildings
Running several properties is easier with one contractor. We work across London and the South East, so work at different addresses can be planned together and kept on a regular cycle.
We regularly work with managing agents. Send the address, what’s needed and how access works, and we will send a fixed-price quote.
Questions from Cramhurst
Is planning permission needed for a heat pump in Cramhurst?
There’s no single answer: the building and the outdoor unit position decide it. Around 8 listed entries sit within 0.5 miles of central Cramhurst. Heat pumps on houses are often permitted development, but listed buildings need consent and conservation areas restrict outdoor units facing a road. Where it’s needed, we check with Waverley council, which is usually the planning authority for Cramhurst.
Does the Boiler Upgrade Scheme cover homes in Cramhurst?
Cramhurst is in England, where the Boiler Upgrade Scheme runs. Air-to-water and ground source systems attract £7,500. Air-to-air gets £2,500, but only where it takes over from fossil-fuel heating and covers the whole home’s heating demand. As an MCS certified installer, we apply for it on your behalf.
Do you look at the job first?
Yes. For simple jobs, pictures and a few details can be enough, while bigger systems and repairs that need testing get a visit.
Do you offer emergency call-outs?
Yes, any time. If something urgent happens, like water coming from a unit or a critical room overheating, call our 24/7 line and we’ll agree what happens next.
Do I need new radiators for a heat pump?
It depends on each radiator and the room it heats. At the lower temperatures a heat pump uses, radiators need more surface so we check every radiator against the room’s heat loss.
Which brands do you work with?
The main ones, including Mitsubishi Electric, Daikin, Fujitsu, Panasonic, Toshiba, LG, Samsung, Mitsubishi Heavy Industries and Hitachi. For a new system, we suggest the make and model that suit the property and tell you why.
What does F-Gas certified mean?
Certification shows a business is approved to work on systems that hold F gas refrigerant. That isn’t optional: it’s required by law, and we hold it.
What a customer said
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead