Windsor and Maidenhead · Heat pump installation
Clewer air source heat pumps
F-Gas certified and NICEIC approved, we cover Clewer for air source heat pumps. A fixed price before we start, and a 24/7 emergency line.
- Radiators that may be too small for a heat pump
- Finding a place for the outdoor unit
- Moving away from fossil-fuel heating
Do you need air source heat pumps in Clewer?
Extensions, renovations and loft conversions are a natural time to rethink the heating. It’s simpler to plan radiators, pipework and a cylinder while the builders are in.
Keep an eye out for any of the following:
- Plans to switch to electric heating with a heat pump
- Choosing between air-to-water and air-to-air
- Questions about the Boiler Upgrade Scheme
If your home is near Windsor & Eton Central station and heated by a gas boiler, an air-to-water heat pump can replace it where the survey shows it suits.
Questions to ask before booking
- Why the equipment they’re quoting suits the job
- Who does the electrical work, and whether they can certify it
- What happens if the job turns out to be different on the day
Air source heat pumps in Clewer, done properly
As an MCS certified installer, we fit air source heat pumps for homes in Clewer and the rest of Windsor and Maidenhead. Air-to-water systems feed your radiators or underfloor heating and hot water cylinder, while air-to-air systems heat rooms directly through indoor units and can cool them too. We’ll explain which type fits your home and why. The work covers hot water cylinders, underfloor heating and radiator systems, and people most often call us about replacing a combi boiler with a heat pump and deciding which kind of heat pump suits the home.
For a house near Clewer, space outside is rarely the problem, so heat loss, radiators and the electrics are what we check.
Think of the paperwork as the system’s health record: a dated account of the work and the readings we took. If anything goes wrong later, it helps the next engineer and the manufacturer and it’s worth keeping safe.
- Location
- Clewer (SL4)
- Wider area
- Windsor and Maidenhead
- Prices
- £8,000–£16,000 (0% VAT on homes), before the grant
- Credentials
- NICEIC approved, F-Gas certified, MCS
- Quote
- Fixed, in writing
- Call
- 07833 053749
- Last updated
- 30 October 2026
What air source heat pumps cannot fix
Some problems need a different service or another trade:
- Getting planning permission or listed building consent on your behalf
- A grant for a home that does not meet the scheme rules
- Any gas work on the existing boiler
Not sure which it is? You can ring us on 07833 053749, or email if that’s easier and we will tell you honestly.
What we work on in Clewer
- Hot water cylinders
- Radiator systems
- Air-to-water heat pumps
- Homes heated by oil, LPG or gas
- Air-to-air heat pumps
- Underfloor heating
Heat pumps in Clewer: local notes
About 23 miles out from central London, Clewer is part of the South East area we work across.
If your home is listed, like Windsor Castle about 1 mile east, listed building consent comes before any heat pump work.
Clewer is about 1 mile north of Windsor, in Windsor and Maidenhead. From the centre of Clewer to the outskirts, our engineers cover air source heat pumps, from small jobs to large ones. In Windsor and Maidenhead alone we list 57 places, and Clewer is one. Guildford is in our area too, about 17 miles from Clewer.
The closest recent job we can point to from Clewer was on Church Street, Staines-upon-Thames (TW18), about 7 miles south-east: installing two LG wall-mounted units in the main office area and a single unit in the client meeting room.
From Oak Lane, Vale Road and Mill Lane to the smaller roads in between, the whole area is covered. With the A308 and A332 close by, Clewer is simple for us to get to. If you’re just outside Clewer, we cover Windsor (1 mile south), Eton (1 mile north-east), Eton Wick (1 mile north-west), Boveney (1 mile west) and Dedworth (1 mile south-west). We also work in nearby towns such as Maidenhead (5 miles north-west), Boyn Hill (5 miles west), North Ascot (5 miles south-west) and Cookham (7 miles north-west).
Landmarks near Clewer
Around Clewer, our work takes us to homes and businesses near The Windsor Boys' School, The Windsor Boys' School and The Vansittart Arms and the streets around them. For rail, the closest station is Windsor & Eton Central station, roughly 0.7 miles east of the centre. A little further out are Museum of Antiquities (0.7 miles north-east) and King Edward VII Hospital (1 mile south-east). For a walk, there’s Taplow Lake and Bray Pit.
How the visit works
We keep the work area tidy as we go, with dust sheets down and offcuts and packaging cleared up. If we need to drill through a wall, we agree the spot with you first. On site, it takes from a couple of days to around a week, depending on the system and how much of the heating changes. We plan the visit to Clewer from the survey or your pictures.
- It begins with your house and the heating it relies on now.
- A heat loss survey is carried out, room by room.
- From those figures we size the heat pump and decide on radiators, cylinder and outdoor position.
- A fixed-price quote explains the cost, the grant position and the VAT.
- Installation, commissioning and MCS registration complete the job.
Preparing for the visit
- Dig out any previous service or F-Gas records
- Let us know where we can park and unload
- Mention any roof access, ladders or high-level work
Getting a quote
Quoting starts with a diagnosis, from a site survey or, where the job is straightforward, from pictures and measurements. Then you get a fixed price so you know the cost before we begin.
Advice
Other services in Clewer
Keeping the system healthy
After the visit, a few habits help:
- Ask about the grant before you commit
- Know the servicing conditions in your warranty
- Keep to regular servicing
The warranty on the heat pump is the manufacturer’s, on its own terms. We explain the terms for your brand, including any servicing conditions.
A well-insulated home helps a heat pump, as lower heat loss means the system has less to do.
Common questions in Clewer
Do you cover smaller places like Clewer?
Yes. Clewer is within the area we cover across London and the South East. Visits to smaller places are planned so the engineer arrives with what the job needs.
Can I fit a heat pump in Clewer without planning permission?
It depends on the property. Central Clewer sits inside a conservation area. The permitted development rules for heat pumps leave out listed buildings and stop outdoor units going on road-facing walls or roofs in conservation areas. Anything outside the rules needs an application, and we raise it with the local planning authority (for Clewer, usually Windsor and Maidenhead council) first.
Do you work on all makes?
The main ones, including Mitsubishi Electric, Daikin, Fujitsu, Panasonic, Toshiba, LG, Samsung, Mitsubishi Heavy Industries and Hitachi. For a new system, we suggest the make and model that suit the property and explain why.
Will my radiators work with a heat pump?
The heat loss survey answers that, room by room. Rooms where the radiator is big enough stay as they are, and any that need upsizing are set out in the quote.
Can I get a grant for an air-to-air heat pump?
The air-to-air grant is £2,500, and only some homes qualify. It must replace fossil-fuel heating and meet the full heating demand of a home, installed by an MCS certified installer.
Do you protect the property while you work?
We put dust sheets over floors and furniture near the work first, and we tidy up as we go. At the end, we clear up and show you what we have done.
What’s the price of a heat pump installation?
Expect £8,000–£16,000 for an air-to-water system, with 0% VAT on homes, before the grant is taken off. The heat pump size, radiator changes and the cylinder decide where in that range you are. Air-to-air is priced after a survey.
A customer’s words
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead