Windsor and Maidenhead · Commercial air conditioning

Commercial air conditioning in Clewer, Windsor and Maidenhead

For commercial air conditioning in Clewer, choose an F-Gas certified, NICEIC approved company. A fixed price before we start, and a 24/7 emergency line.

  • TM44 recommendations that need acting on
  • Older systems on refrigerants that are getting scarcer
  • Systems that need out-of-hours or phased installation

Commercial air conditioning in Clewer and nearby

FAQs for Clewer

Can I fit air conditioning in Clewer without planning permission?

It depends on the property. The centre of Clewer is in a conservation area. Put simply: reversible systems on houses can be permitted development, cooling-only ones can’t, listed buildings need consent, and conservation areas limit outdoor units facing a road. When your property needs a decision, we contact Windsor and Maidenhead council, which is usually the planning authority for Clewer.

Will you come out to Clewer?

Yes. Clewer is within the area we cover across London and the South East. We’re based in East Grinstead and plan each visit so the job can be finished in one trip where possible.

Do you work on all makes?

Mitsubishi Electric, Daikin, Fujitsu, Panasonic, Toshiba, LG, Samsung, Mitsubishi Heavy Industries, Hitachi and others. For a new system, we suggest the make and model that suit the property and tell you why.

What warranty do I get?

Warranty is the manufacturer’s own, on its terms. Terms differ by brand, and we set them out on your quote.

How much does commercial air conditioning cost?

Each commercial job is surveyed and then priced. That lets us size the system properly and plan the work, and the quote you get is fixed.

Will you make a mess?

We start with protection: dust sheets over floors and anything close to the work. Holes and fixings are agreed with you, and we clean up afterwards before we leave.

When will I hear back?

You will hear from us the same working day. For a breakdown that can’t wait, call our 24/7 emergency line.

How we handle commercial air conditioning in Clewer

Most businesses need to keep trading while the work is done. We plan out-of-hours, weekend and phased installs so disruption is kept down. The programme is agreed before work begins. If the problem is installs that must fit around trading hours and comms rooms without enough cooling, we can help.

In a place like Clewer, commercial air conditioning is often for a shop, a surgery, a pub, an office unit or a farm business. Many need just one to four indoor units, and we size them from a survey.

If a fault appears while the equipment is under the manufacturer’s warranty, tell us the make, model and installation date. We will explain how the manufacturer’s terms are likely to apply before anything chargeable is done.

Place
Clewer (SL4)
Region
Windsor and Maidenhead
Approvals
NICEIC approved, F-Gas certified
Price
A fixed-price quote up front
Prices
Priced after a site survey
Call
07833 053749
Page updated
30 October 2026

Cooling for Clewer businesses

There are about 172 restaurants, cafés and canteens, about 13 hotels, B&Bs and guest houses and about 55 schools and colleges within 1.5 miles or so of the middle of Clewer, according to the Food Standards Agency’s register. Kitchens and dining rooms gain heat quickly, and hotels need quiet units in guest rooms, so each is designed for its use.

If you look after a school such as St Edward's Catholic First School, classroom, office and IT room cooling is usually installed in the holidays. If your office near Windsor & Eton Central station has a comms or server room, it needs cooling all year, not just in summer.

Clewer is about 1 mile north of Windsor, in Windsor and Maidenhead. For commercial air conditioning in and around Clewer, it’s easy to get a fixed-price quote: please call 07833 053749 or drop us a line. Our area covers London and the South East, Clewer included. Clewer is one of 57 places in Windsor and Maidenhead where we work for homes and businesses. Guildford is in our area too, around 17 miles away.

Our nearest recent job to Clewer was on Church Street, Staines-upon-Thames (TW18), about 7 miles south-east: installing two LG wall-mounted units in the main office area and a single unit in the client meeting room.

Our engineers cover all of SL4. If you need commercial air conditioning at a property on Oak Lane, Vale Road and Mill Lane or a nearby road, our engineers can take on the work. We also cover Windsor (1 mile south), Eton (1 mile north-east), Eton Wick (1 mile north-west), Boveney (1 mile west) and Dedworth (1 mile south-west). Further out, we also cover Maidenhead (5 miles north-west), Boyn Hill (5 miles west), North Ascot (5 miles south-west) and Cookham (7 miles north-west).

Landmarks near Clewer

We fit and service air conditioning in homes and premises around The Windsor Boys' School, The Windsor Boys' School and The Vansittart Arms. The closest station to Clewer is Windsor & Eton Central station, roughly 0.7 miles east of the centre. Nearby you’ll also find Museum of Antiquities (0.7 miles north-east) and King Edward VII Hospital (1 mile south-east). For a walk, there’s Taplow Lake and Bray Pit.

Map of Clewer © OpenStreetMap contributors

What affects the quote in Clewer

The diagnosis comes before the price. We look at:

  • The electrical supply and whether a new circuit is needed
  • How far the pipework has to run, and where
  • Whether we need access equipment for high-level work

No two properties are the same, so we price each one individually. The system, the access, the pipe routes and the parts involved all play a part.

Helping us quote

A few details help us quote accurately. When you get in touch, it helps to send:

  • The postcode and whether it’s a home, flat or business
  • Any previous service or F-Gas records
  • Photos showing the indoor unit and the space around it

Getting a quote is straightforward. Call or email with a few details and we will come back to you the same working day. If we need to see the property first, we book a survey at a time that works for you.

How it works

Think of the visit in three stages: diagnose, treat and sign off. First we check the system or the space against the plan, then we do the work, and finally we test, record and explain. The middle part takes longest, which takes a few days for a small shop or office, longer for VRF across several floors. Photos of the existing unit and its label help with repairs and servicing near Clewer.

  1. First comes a site survey of the building, its occupancy and the heat it has to deal with.
  2. A fixed-price quote follows, covering the system type, the layout and the timing.
  3. We agree a programme that suits the site, including evening, weekend or phased installation.
  4. We fit the units, run and test the pipework, connect the condensate and wire in the controls.
  5. Commissioning, F-gas records and a handover of the controls finish the job.

Preparing for the visit

  • Mention any roof access, ladders or high-level work
  • Dig out any previous service or F-Gas records
  • Arrange for someone to be there to let us in

Get a fixed-price quote

To get a fixed-price quote, call us on 07833 053749 or fill in the contact form with the address and a few details about the rooms or units involved. A few pictures make it quicker. You’ll hear back from us the same working day.

Get a price

Read more

When it’s something else

It’s worth knowing the limits before booking:

  • Major builder’s work such as new openings in structural walls
  • Formal planning decisions, which rest with the council
  • Gas boiler or heating plumbing work

Not sure which it is? You can ring us on 07833 053749 or use the quote form and we’ll tell you honestly before you book.

Where we work

  • Server and comms room cooling
  • Ceiling cassettes
  • Wall-mounted split systems
  • Ducted systems
  • VRF systems
  • Multi-split systems

Keeping the system healthy

Aftercare is straightforward, and it helps at the next service:

  • Book a maintenance contract to keep servicing on schedule
  • Keep outdoor units clear of rubbish and stored goods
  • Plan replacements before old systems fail

For systems that require leak checks, the first date goes in the diary and we can cover it under a contract.

Keep filters clean and plant areas clear. Blocked filters and obstructed outdoor units make the system work harder.

What a customer said

“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”

David W., Haywards Heath

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead