Essex · Heat pump installation
Air Source Heat Pumps in Chase Cross
Need air source heat pumps in Chase Cross? We look at the job first, give you a fixed-price quote and do the work at a time that suits you, finishing with proper records.
- Checking whether planning permission is needed
- An oil, LPG or gas boiler near the end of its life
- Comparing heat pump types
What owners can safely do
Never try to top up, release or handle refrigerant yourself. The law requires anyone working on equipment containing F gas to hold the right qualifications, and the company to be certified, and escaping refrigerant can cause cold burns. If you suspect a leak, switch the system off and call us.
Write down what you notice: error codes, noises, drips, smells or a drop in performance. It makes our diagnosis quicker, and a photo or a short video of the display is even better.
About our air source heat pumps in Chase Cross
Heat pumps run at lower flow temperatures than most boilers, so radiators may need to be larger to give out the same heat. The survey shows which rooms are fine and which need changes and anything that needs changing is in the quote. We are often asked to deal with no space for a hot water cylinder and deciding which kind of heat pump suits the home, across air-to-air heat pumps, homes heated by oil, LPG or gas and radiator systems.
Homes around Chase Cross typically have space for an outdoor unit and a hot water cylinder, so the main questions are heat loss, radiators and the electrics.
Some warranty terms depend on the system being serviced regularly by a qualified engineer. Where yours does, a regular service with us keeps that side in order and each visit is recorded.
- Place
- Chase Cross (RM5, RM1, RM4)
- Wider area
- Essex
- Price guide
- £8,000–£16,000 before the grant, 0% VAT on homes
- Accreditations
- NICEIC and F-Gas, MCS
- Price
- Fixed after a survey or photos
- Call
- 07833 053749
- Checked
- 30 October 2026
Nearby places to Chase Cross
More services for Chase Cross
How we price air source heat pumps
Every job gets its own quote. These are the things that affect it:
- The size of the job
- A single visit or a regular plan
- What we find on the survey or diagnosis
Our prices page shows typical ranges, but each job is priced on what it involves. For a fixed-price quote, ring 07833 053749, or email if that’s easier, and we will explain what it covers.
Before you get in touch
There’s no need for technical detail. It helps if you can send:
- A few photos of the room and the wall the unit is on, or will go on
- The rating plate or label on any existing unit
- Any error code or flashing light on the display
For air source heat pumps in Chase Cross, call us on 07833 053749 or send an email. Tell us what kind of property it is and what you’d like done, plus some photos if they’re to hand. We reply the same working day.
What a heat pump looks like in Chase Cross
Chase Cross is about 14 miles from central London, well within the area we cover from our base in East Grinstead. About 53% of homes in Chase Cross and the neighbourhoods around it date from 1945 to 1972, according to VOA council tax data. Homes of that age often have cavity walls that may or may not be insulated, which the survey checks.
Older homes near St James may need extra checks for planning and heat loss before a heat pump is designed. Historic houses such as Hare Hall, about 2 miles south-east, are a reminder that listed homes need consent before a heat pump goes in.
Chase Cross is about 2 miles north of Romford, in Essex. If you need air source heat pumps in Chase Cross, please call us on 07833 053749 or drop us a line for a fixed-price quote. Our area covers London and the South East, Chase Cross included. Count every place we list in Essex and you reach 644, with Chase Cross on the list. There’s also a page for London, about 14 miles away.
The closest recent job we can point to from Chase Cross was on Greenwich High Road, Greenwich (SE10), about 12 miles south-west: installing a Mitsubishi Electric wall-mounted unit in the retail area and a second unit in the stockroom and office.
Whether you are on Merlin Road, Avelon Road and Vernon Road or anywhere close by, we can help. Here we cover the RM5, RM1 and RM4 postcode area. Nearby, we also cover air source heat pumps in Havering-atte-Bower (1 mile north-east), Redbridge (2 miles west), Stapleford Abbotts (2 miles north), Lambourne End (3 miles north-west) and Chigwell Row (3 miles west). Within a short drive, we also cover Basildon (12 miles east), Harlow (12 miles north), Brentwood (6 miles east) and Billericay (11 miles east).
Local landmarks in Chase Cross
Around Chase Cross, our work takes us to homes and businesses near Colley Rowe Inn, Clockhouse Primary School and Havering Country Park, among other places. The closest station to Chase Cross is Gidea Park station, about 2.1 miles south-east. Other landmarks nearby include Romford Shopping Hall (1.8 miles south) and Harold Wood Hospital (2.3 miles south-east). Open spaces near Chase Cross include Bedfords Park.
Different systems, different jobs
VAT on heat pumps
Installing an air source heat pump in a home is zero-rated until 31 March 2027, then 5% following HMRC’s rules on energy-saving materials. Businesses pay the standard rate.
Air-to-air heat pumps
A £2,500 Boiler Upgrade Scheme grant is available for air-to-air only if it replaces the fossil-fuel heating and meets the full heating demand. It also has to be fitted by an MCS certified installer, in a home.
The process
Testing is the last part of the visit wherever the system can be switched on. Then we show you what we’ve done and answer any questions, and anything that needs attention later is pointed out. The visit takes a few days for most air-to-water installations, with air-to-air systems often quicker. In a place like Chase Cross, parking is rarely an issue, but tell us about gates and access to the back of the property.
- First, a chat about the property and your goals for the heating.
- The survey checks heat loss, emitters, hot water and the outdoor unit position.
- We explain which type of heat pump suits the home and whether a grant could apply.
- The system is installed and connected to the controls.
- We commission it, complete the MCS certificate and show you how to use it.
Getting ready for the visit
- Find the manual or the paperwork for the system, if you have it
- Make sure someone can let us in at the agreed time
- Make sure we can reach the outdoor unit, or where it will go
How to get a quote
Photos are the fastest route to a quote: the inside and outside of the property where the work is, plus the rating plate of any unit already there. Tell us the address and what you need, and simple jobs can often be priced without a visit.
Advice
Chase Cross: your questions answered
Can you do air source heat pumps in Chase Cross?
Yes. Chase Cross is one of the places we cover. Get in touch with the details and we reply the same working day.
Will you come out to Chase Cross?
We do. Villages and hamlets get the same service as the bigger towns. Send a few details and pictures, and we reply the same working day.
How quickly will you reply?
You will hear from us the same working day. If it’s an emergency, ring the 24/7 line instead.
Will I need planning consent for an air source heat pump?
Under the Planning Portal rules, a heat pump on a house can often be permitted development. Listed buildings and their curtilages are excluded, and listed building consent is a separate matter. We check what applies to you.
Can I do any of the installation myself?
No, not the refrigerant side. Under the F-gas rules, it must be done by qualified engineers from a certified company, and a new circuit is notifiable under Part P unless a registered electrician, such as a NICEIC approved contractor, does it.
Will you make a mess?
Protection goes down first: sheets over the floor and nearby furniture. Holes and fixings are agreed with you, and we clean up afterwards before we leave.
Can I get a grant for an air-to-air heat pump?
Yes, but only where it becomes the home’s main heating. The £2,500 applies when it replaces the fossil-fuel heating, covers the full heating demand, is fitted by an MCS certified installer and serves a home. Fitted alongside a boiler, it won’t qualify.
What a customer said
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead