Kent · Heat pump installation
Heat pump installation in Blean, Kent
Air source heat pumps across Blean and nearby, from a site survey or diagnosis to sign-off and a fixed price agreed before we start.
- Checking emitters for a heat pump
- Plans to switch to electric heating with a heat pump
- Choosing between air-to-water and air-to-air
What air source heat pumps can’t fix
It’s worth knowing the limits before booking:
- Insulation work, such as loft or cavity wall insulation
- Planning decisions, which rest with the council
- Gas boiler work, such as disconnecting the old boiler, which needs a Gas Safe registered engineer
If in doubt, phone 07833 053749 or drop us a line and we will say what we think.
What the work covers
- Hot water cylinders
- Air-to-air heat pumps
- Underfloor heating
- Homes heated by oil, LPG or gas
- Radiator systems
- Air-to-water heat pumps
About our air source heat pumps in Blean
As an MCS certified installer, we fit air source heat pumps for homes in Blean and the rest of Kent. Air-to-water systems feed your radiators or underfloor heating and hot water cylinder, while air-to-air systems heat rooms directly through indoor units and can cool them too. We’ll explain which type fits your home and why. The work covers air-to-water heat pumps, hot water cylinders and radiator systems, and people most often call us about a boiler that’s getting old and wanting to stop using oil, LPG or gas for heating.
Space for an outdoor unit is rarely an issue near Blean, so the design focuses on heat loss and radiators.
If a fault appears while the equipment is under the manufacturer’s warranty, tell us the make, model and installation date. We will explain how the manufacturer’s terms are likely to apply before anything chargeable is done.
- Where
- Blean (CT2)
- Region
- Kent
- Quotes
- Fixed after a survey or photos
- Approvals
- NICEIC and F-Gas, MCS
- Costs
- Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
- Telephone
- 07833 053749
- Page updated
- 30 October 2026
Blean: your questions answered
Is the heat pump grant available in Blean?
Blean is covered, as the scheme runs across England and Wales. The amount depends on the type of heat pump, and the survey confirms which applies. The installer applies, and we’re MCS certified.
Will you come out to Blean?
We do. Villages and hamlets get the same service as the bigger towns. We are based in East Grinstead and plan each visit so the job can be finished in one trip where possible.
Do you survey before quoting?
Yes. For simple jobs, pictures and a few details can be enough, while larger systems and faults that need testing are seen on site.
What’s the difference between air-to-water and air-to-air heat pumps?
Air-to-water suits homes with radiators and a cylinder; air-to-air suits rooms that need heating and cooling, and we help you choose. We install both types.
Can you set up regular servicing?
Yes. Maintenance contracts are part of what we do, with visits at the interval your system and the manufacturer need. Each visit is written up and F-Gas records kept where they apply.
Do I need planning permission for a heat pump?
That depends on your home and the unit’s position. Flats have tighter limits, conservation areas add conditions, and Article 4 directions can remove rights and we look at it during the survey.
Does servicing affect my warranty?
It depends on the manufacturer’s terms. Some warranty terms require the system to be serviced regularly by a qualified engineer, so check the terms or ask us. Keep every service record either way.
Nearby places to Blean
Also in Blean
What owners can safely do
Write down what you notice: an error code, a new noise, a drip, a smell or a change in how well the system heats or cools. It makes our diagnosis quicker, and a photo of the display helps even more.
Owners can handle the everyday basics: keep the outdoor unit clear of leaves, plants and clutter, check the settings and the remote, and follow the cleaning the manual describes. Anything inside the units, the electrics and the refrigerant is engineer’s work.
Looking after your system
Aftercare is straightforward, and it helps at the next service:
- Avoid switching the heat pump on and off often
- Read the manufacturer’s warranty terms for your brand
- Find out the grant position at the survey
If anything does not seem right after installation, give us a ring on 07833 053749, or email if that’s easier and we’ll talk it through. A yearly service is a good habit.
Book a service every year. Check the manufacturer’s terms, as they may include servicing conditions.
What we do, step by step
The visit has three parts, a bit like a doctor’s appointment: look, put right and sign off. First comes a careful look at the system or the space, then the work itself, and finally we test, record and explain. The middle part takes longest, which takes a few days on site, depending on the cylinder, the radiators and the pipework involved. A few pictures help us make the most of a visit to Blean.
- First we talk through the property and the current system.
- A heat loss survey is carried out, room by room.
- From those figures we size the heat pump and decide on radiators, cylinder and outdoor position.
- Cost, grant and VAT appear on one fixed-price quote.
- We install, commission and register the system under MCS.
Before we arrive
- Clear access to the fuse board
- Tell us about access, such as roof hatches, high walls or locked plant areas
- Keep pets out of the rooms we are working in
Getting a price
The quickest way to a quote is to send photos: the room or the existing unit, the outside wall or roof where the outdoor unit sits or would go, and the label on any existing unit. Add the address and what you’d like done, and many jobs can be priced from that.
Advice
Air source heat pumps around Blean
About 80% of households live in detached or semi-detached houses, according to the 2021 Census. Finding room for the outdoor unit and a cylinder is seldom a problem in homes like these. Roughly a third of a mile or less from central Blean, you reach the Blean Conservation Area. Draw a one-mile circle round the middle of Blean and it takes in 3 conservation areas. Church of St Cosmus and St Damian, listed at grade II*, is one of roughly 5 protected buildings and structures in the half-mile around Blean’s centre. So the heat pump survey asks two extra questions here: is the home listed, and is it inside a conservation area?
Period properties close to Church of St Cosmus and St Damian can suit a heat pump, though insulation and any heritage protection are checked first. Every heat pump design starts with a room-by-room heat loss calculation.
Blean is about 3 miles north-west of Canterbury, in Kent. From the centre of Blean to the outskirts, we cover air source heat pumps, from small jobs to large ones. 922 places in Kent are on our list, large and small. You can also see our page for Bromley, about 45 miles away.
From Westfield, School Lane and Vicarage Lane to the smaller roads in between, the whole area is covered. Our working area takes in CT2, every street of it. We also cover the places around Blean: Honey Hill (1 mile north-west), Tyler Hill (1 mile east), Denstroude (1 mile north-west), Hackington (1 mile east) and Yorkletts (2 miles north-west). Larger places within reach include Ashford (14 miles south-west), Canterbury (3 miles south-east), Sittingbourne (14 miles west) and Whitstable (3 miles north).
What’s near Blean
Locally, jobs take us to houses, flats and workplaces close to The Archbishop's School, Tyler Hill Meadow and St Edmund's School, among other places. Blean’s nearest station is Canterbury West station, about 2.1 miles south-east. Nearby you’ll also find Sidney Cooper Museum (2.3 miles south-east) and Eastbridge Hospital of St Thomas the Martyr (2.4 miles south-east). For a walk, there’s Blean Woods RSPB Reserve.
A customer’s words
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead