Kent · Heat pump installation
Heat pump installation in Bishopstone, Kent
Air source heat pumps for Bishopstone, from F-Gas certified engineers, with the manufacturer’s warranty terms explained on your quote. Enquiries answered the same working day.
- Not knowing whether a grant applies
- An oil, LPG or gas boiler near the end of its life
- Replacing a combi boiler with a heat pump
When it’s something else
A few issues sit outside what this work can do:
- Gas boiler work, such as disconnecting the old boiler, which needs a Gas Safe registered engineer
- Tax rulings, which only HMRC can give
- Draught-proofing and insulation upgrades
If you are not sure, just phone us on 07833 053749 or fill in the contact form and we will give you a straight answer before booking.
What we work on in Bishopstone
- Radiator systems
- Air-to-air heat pumps
- Hot water cylinders
- Underfloor heating
- Homes heated by oil, LPG or gas
- Air-to-water heat pumps
Air source heat pumps in Bishopstone
Heat pumps run at lower flow temperatures than most boilers, so radiators may need to be larger to give out the same heat. We check each radiator against the room’s heat loss and anything that needs changing is in the quote. The work covers air-to-air heat pumps, homes heated by oil, LPG or gas and radiator systems, and people most often call us about no space for a hot water cylinder and not knowing whether a grant applies.
Homes around Bishopstone typically have space for an outdoor unit and a hot water cylinder, so the main questions are heat loss, radiators and the electrics.
Refrigerant work is written up in the F-Gas records: the work carried out, the refrigerant involved and the quantities. Keep the records with the manual and the warranty documents, as a manufacturer or a future engineer may ask to see them.
- Where
- Bishopstone (CT6)
- Region
- Kent
- Replies
- Answered the same working day
- Prices
- Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
- Quote
- Fixed-price quote after a site survey
- Certified
- F-Gas certified company, NICEIC approved, MCS
- Telephone
- 07833 053749
- Last updated
- 30 October 2026
Bishopstone: your questions answered
Does the Boiler Upgrade Scheme cover homes in Bishopstone?
Bishopstone is covered, as the scheme runs across England and Wales. It gives £7,500 towards an air-to-water or ground source heat pump, or £2,500 towards an air-to-air heat pump that replaces the fossil-fuel heating and meets the whole home’s heating need. As an MCS certified installer, we apply for it on your behalf.
Will you come out to Bishopstone?
We do. Villages and hamlets get the same service as the bigger towns. Visits to smaller places are planned so the engineer arrives with what the job needs.
Will you make a mess?
We start with protection: dust sheets over floors and anything close to the work. Any drilling is agreed with you first, and we clear up the dust and offcuts before we leave.
What’s the price of a heat pump installation?
Expect £8,000–£16,000 for an air-to-water system, with 0% VAT on homes, before the grant is taken off. The heat pump size, radiator changes and the cylinder decide where in that range you are. Air-to-air is priced after a survey.
Do you offer maintenance contracts?
Yes. Maintenance contracts are part of what we do, set at the interval the system and the manufacturer’s terms need. Each visit is written up and F-Gas records kept where they apply.
Why use an F-Gas certified company?
Certification shows a business is approved to work on systems that hold F gas refrigerant. That is not optional: it’s required by law, and we hold it.
Will you work on another installer’s system?
Yes. Systems fitted by other companies are fine from all the leading brands. Tell us the make and model and send any paperwork you have.
Air source heat pumps in Bishopstone: the local picture
The coast is only about 1 mile from Bishopstone. For a heat pump near the sea, ask about any coastal protection option the manufacturer offers. The last census (2021) found about 82% of households in detached or semi-detached houses. Houses usually have space for an outdoor unit and a hot water cylinder. Historic England lists about 5 buildings and structures within half a mile of the centre of Bishopstone, including Bishopstone Manor (grade II). Where a home is affected, the outdoor unit position is settled with Canterbury City council, typically the planning authority here before the heat pump design is finished.
Sizing comes from the heat each room loses on a cold day, not from the size of the old boiler. If your home is one of the older properties near Church of St Mary the Virgin, the survey checks whether it’s listed or in a conservation area before the outdoor unit position is chosen.
Bishopstone is about 2 miles east of Herne Bay, in Kent. For air source heat pumps in and around Bishopstone, it’s easy to get a fixed-price quote: please give us a ring on 07833 053749 or email us. We work across London and the South East, including Bishopstone. Count every place we list in Kent and you reach 922, with Bishopstone on the list. The nearest of our city pages is Bromley, around 50 miles from Bishopstone.
That includes properties on Manor Road, Puffin Road and Neville Road and nearby roads. Postcode districts we cover here: CT6. Close by, we work in Hillborough (1 mile south), Beltinge (1 mile west), Hawthorn (1 mile south), Reculver (1 mile east) and Broomfield (1 mile south-west). Larger places within reach include Canterbury (8 miles south-west), Margate (9 miles east), Ramsgate (11 miles east) and Broadstairs (11 miles east).
Local landmarks in Bishopstone
Around Bishopstone, our work takes us to homes and businesses near Bishopstone Cliffs. The nearest railway station is Herne Bay station, roughly 2.4 miles west. Well-known places in the area include Whitstable and Tankerton Hospital (5.3 miles west). For a walk, there’s West Blean and Thornden Woods.
How the visit works
Where something has to be switched off during the work, we agree it with you first so it does not catch you out. In a business, work can often be done one area at a time. The work takes a few days on site, depending on the cylinder, the radiators and the pipework involved. Because we plan from photos or a survey, a job in Bishopstone can usually be finished in one visit.
- We start with your plans and the property.
- The survey checks heat loss, emitters, hot water and the outdoor unit position.
- We recommend air-to-water or air-to-air and check the grant position.
- The system is installed and connected to the controls.
- After commissioning, you get the MCS certificate and a handover.
Getting ready for the visit
- Have the make and model of any existing unit to hand
- Clear a path to the units and the space around them
- Let us know if the building has a permit or sign-in process
Get a fixed-price quote
Some jobs can be priced from pictures, while others need a survey. Multi-room systems, commercial buildings and anything with a long or hidden pipe route are normally surveyed first. Either way, the quote is fixed before anything goes ahead.
Related advice
How we price air source heat pumps
The price is fixed before any work begins. It takes into account:
- Whether the existing supply is suitable
- The size of the job
- Which make and model is being fitted or worked on
Our prices page shows typical ranges, but each job is priced on what it involves. For a fixed-price quote, give us a ring on 07833 053749 or email us, and we will talk you through it.
What to send for a quote
Photos let us diagnose from a distance. The most useful are:
- A short video of any fault, such as a noise or a flashing light
- The make and model of the system, from the label
- A photo of the consumer unit with the cover closed
For air source heat pumps in Bishopstone, give us a ring on 07833 053749. Let us know the type of property and what you need, and send a few photos if you can. Enquiries get a reply the same working day.
Towns and villages near Bishopstone
Other services in Bishopstone
Different systems, different jobs
Air-to-water heat pumps
Flow temperatures are lower than with a typical boiler, so radiator sizes matter.
Radiators and underfloor heating
Underfloor heating suits a heat pump’s lower flow temperature and we look at it during the survey.
From one of our customers
“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”
David W., Haywards Heath