Kent · Heat pump installation
Heat pump installers in Beltinge
We cover Beltinge for MCS certified installation of air source heat pumps for heating and hot water, with the Boiler Upgrade Scheme grant applied for. A look at the job first, a fixed-price quote and written records at the end.
- A boiler that’s getting old
- Working out where a cylinder could go
- Working out whether radiators need upsizing
Leave it or put it right?
Planning rules have specific conditions. Checking the position for your home at the survey stage avoids surprises later, including conservation areas, listed buildings and Article 4 directions. A dirty or faulty system works harder and costs more to run.
A single unit or a whole estate, we price it on the same basis: what needs doing, how we get to it and what it needs. You will have a fixed price before any work starts, with VAT shown clearly.
What you get with us
- 24/7 emergency line for breakdowns
- Enquiries answered the same working day
- Listed on Checkatrade
- Clear warranty information from the manufacturer
Take a look at how installs are priced or our accreditations.
Air source heat pumps in Beltinge
We install air source heat pumps in Beltinge and across Kent, and we are MCS certified. There are two kinds: air-to-water, which heats radiators or underfloor heating and your hot water, and air-to-air, which warms rooms through indoor units and can also cool. We help you work out which suits your home. We are often asked to deal with ageing boilers that will need replacing and replacing a combi boiler with a heat pump, across air-to-water heat pumps, radiator systems and hot water cylinders.
Older homes around Beltinge can be draughty or have solid walls, so a proper heat loss calculation matters. Sometimes insulating first makes more sense.
We’re an F-Gas certified company, NICEIC approved for electrical work, MCS certified for heat pumps and a Checkatrade member. Refrigerant work is done by engineers who hold the F-gas qualifications the law requires.
- Place
- Beltinge (CT6)
- Wider area
- Kent
- Approvals
- F-Gas certified, NICEIC approved, MCS
- Prices
- £8,000–£16,000 before the grant, 0% VAT on homes
- Price
- A fixed price before work begins
- Call
- 07833 053749
- Reviewed
- 30 October 2026
What a heat pump looks like in Beltinge
The coast is only about 1 mile from Beltinge. Coastal sites are worth mentioning at the survey, as salt air affects the outdoor unit and its fixings. About 82% of households live in detached or semi-detached houses, according to Census 2021 figures. Finding room for the outdoor unit and a cylinder is seldom a problem in homes like these.
Every heat pump design starts with a room-by-room heat loss calculation.
Beltinge is about 1 mile east of Herne Bay, in Kent. For air source heat pumps in and around Beltinge, it’s easy to get a fixed-price quote: please give us a ring on 07833 053749. We work across London and the South East, including Beltinge. Across Kent, we cover 922 places, Beltinge among them. The nearest of our city pages is Bromley, around 49 miles from Beltinge.
Every address in CT6 is within our area, from busy streets to back roads. From Manor Road, Puffin Road and Cliff Avenue to the smaller roads in between, the whole area is covered. We also cover the places around Beltinge: Bishopstone (1 mile east), Hillborough (1 mile south-east), Hawthorn (1 mile south-east), Broomfield (1 mile south) and Herne Bay (1 mile west). Within a short drive, we also cover Canterbury (7 miles south-west), Margate (10 miles east), Ramsgate (11 miles east) and Broadstairs (12 miles east).
Landmarks near Beltinge
Locally, jobs take us to houses, flats and workplaces close to Herne Bay High School and Bishopstone Cliffs, among other places. For rail, the closest station is Herne Bay station, about 1.9 miles west of the centre. Well-known places in the area include Whitstable and Tankerton Hospital (4.8 miles west). Open spaces near Beltinge include West Blean and Thornden Woods.
What we do, step by step
There’s very little for you to do on the day. Just let us in and point us to the units, or to where they’ll be fitted, and we take it from there. At the end, we tidy up and run through the work with you. In a place like Beltinge, parking is rarely an issue, but tell us about gates and access to the back of the property.
- First, a chat about the property and your goals for the heating.
- A survey covers heat loss, radiators, hot water and where the outdoor unit could sit.
- We recommend air-to-water or air-to-air and check the grant position.
- We install the heat pump and connect it up.
- The job ends with commissioning, the MCS certificate and a walk through the controls.
Getting ready for the visit
- Clear the space around the indoor unit, or where it will go
- Mention any parking restrictions near the property
- Keep pets and children away from the work area
Getting a quote
To get a fixed-price quote, give us a ring on 07833 053749 or send an email with the address and a few details about the rooms or units involved. Photos help a lot. We reply to enquiries the same working day.
Related advice
Common questions in Beltinge
Does the Boiler Upgrade Scheme cover homes in Beltinge?
Beltinge is in England, where the Boiler Upgrade Scheme runs. The amount depends on the type of heat pump, and the survey confirms which applies. We hold MCS certification, so the application is ours to make for you.
Will you come out to Beltinge?
Yes, smaller places are covered as well as towns. We’re based in East Grinstead and plan each visit so the job can be finished in one trip where possible.
Do you provide F-Gas records?
Yes. You get a written record of each visit, and any work on the refrigerant circuit goes in the F-Gas records. Keep them with the manual and the warranty documents.
What does F-Gas certified mean?
Companies working on equipment that contains F gas must be certified by an approved body, and each engineer needs the right qualifications too. It means the refrigerant in your system is handled legally.
Can I fit air conditioning or a heat pump myself?
Anything that involves the refrigerant needs an F-Gas qualified engineer from a certified company. That’s a legal requirement, and it also matters for the manufacturer’s warranty. We are happy to quote for the full job, supply to commissioning.
Can we book visits on a schedule?
Yes. Tell us what you have and how it’s used, and we will suggest a schedule with a fixed price. That can include the leak checks the F-gas rules require for larger systems.
Are you F-Gas certified?
AirCon Doctor is an F-Gas certified company, with NICEIC approval for electrical work and MCS certification for heat pumps. We are members of Checkatrade too.
What we’re called out for in Beltinge
When a home is being extended or renovated, it’s a good moment to look at heat pumps. Pipework, radiators and space for a cylinder are easier to plan while work is going on.
Most people get in touch after spotting one of these:
- Moving away from fossil-fuel heating
- Finding a place for the outdoor unit
- Checking eligibility for a heat pump grant
Live in one of the older houses around Church of St Bartholomew? Expect the survey to look closely at heat loss and at the building’s planning status.
Comparing quotes
- What happens if the job turns out to be different on the day
- Whether the manufacturer’s warranty depends on regular servicing
- Proof of F-Gas company certification
What the work involves, system by system
Radiators and underfloor heating
Heat pumps run at lower flow temperatures, so radiators may need to be larger, and the survey checks each one.
Outdoor unit position and planning
Permitted development conditions in England include an outdoor unit of no more than 1.5 m³, compliance with MCS 020(a), and use for more than cooling alone. Listed building curtilages are excluded.
Places near Beltinge
What else we do in Beltinge
From one of our customers
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager