Kent · Heat pump installation
Heat pump installation in Bishopsbourne, Kent
Expert air source heat pumps for Bishopsbourne: a survey or diagnosis, a fixed price, careful work and proper paperwork. Call for a fixed-price quote.
- Checking eligibility for a heat pump grant
- Checking emitters for a heat pump
- Questions about listed buildings or conservation areas
Aftercare tips
Every system needs looking after, and most of it is easy. A few tips:
- Seal draughts where you can
- Book a yearly service
- Use the settings explained at handover
The warranty on the heat pump is the manufacturer’s, on its own terms. We go through the conditions with you, including any servicing they ask for.
Leave space around the outdoor unit. Airflow is what it runs on, so keep it clear all year.
About our air source heat pumps in Bishopsbourne
As an MCS certified installer, we fit air source heat pumps for homes in Bishopsbourne and the rest of Kent. There are two kinds: air-to-water, which heats radiators or underfloor heating and your hot water, and air-to-air, which warms rooms through indoor units and can also cool. We help you work out which suits your home. If the problem is not knowing whether a grant applies and finding a place for the outdoor unit, we can sort it out.
Homes around Bishopsbourne usually have room outside for a heat pump, so the design comes down to heat loss, radiators and hot water.
If a fault appears while the equipment is under the manufacturer’s warranty, tell us the make, model and installation date. We will tell you how the manufacturer’s warranty is likely to apply before any chargeable work goes ahead.
- Place
- Bishopsbourne (CT4)
- Region
- Kent
- Replies
- Same working day
- Pricing
- Fixed, in writing
- Accreditations
- NICEIC approved, F-Gas certified, MCS
- Typical price
- £8,000–£16,000 before the grant, 0% VAT on homes
- Phone
- 07833 053749
- Updated
- 30 October 2026
Places near Bishopsbourne
What else we do in Bishopsbourne
System by system
The Boiler Upgrade Scheme
There’s one grant per property, and you cannot get a grant to replace a low-carbon system, and hybrid systems are not eligible.
Radiators and underfloor heating
Heat pumps run at lower flow temperatures, so radiators may need to be larger so we check them against each room’s heat loss.
Before you call an engineer
Good habits make our visits easier, not unnecessary. Simple care keeps the air moving through the system, but the inside of the units, the refrigerant and the electrics still need a qualified engineer.
Keep a note of anything odd: an error code, a new noise, a drip, a smell or a change in how well the system heats or cools. It helps us diagnose quickly, and a photo of the display helps even more.
How it works
Every visit follows the same order: agree the plan on site, protect the area, carry out the job, check the system and talk you through it. The visit itself takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes. Photos of the room and the outside of the property help us plan a visit to Bishopsbourne.
- First we talk through the property and the current system.
- We measure heat loss for every room.
- From those figures we size the heat pump and decide on radiators, cylinder and outdoor position.
- You get a fixed price, with any grant and the VAT set out.
- Then it’s fitted, commissioned and registered with MCS.
Before we arrive
- Mention any roof access, ladders or high-level work
- Clear access to the fuse board
- Plan for pets to be kept clear during the visit
Getting a quote
Need a price for air source heat pumps? Please phone us on 07833 053749 or fill in the contact form and tell us about the job. We will explain what we’d recommend and why, then send a fixed-price quote before you commit to anything.
Read more
Your questions about air source heat pumps in Bishopsbourne
Do I need planning permission for a heat pump in Bishopsbourne?
It comes down to the building and the spot chosen for the outdoor unit. The Bishopsbourne Conservation Area takes in the middle of Bishopsbourne. The permitted development rules for heat pumps leave out listed buildings and stop outdoor units going on road-facing walls or roofs in conservation areas. Anything outside the rules needs an application, and we raise it with the local planning authority (for Bishopsbourne, usually Canterbury City council) first.
Is the heat pump grant available in Bishopsbourne?
Bishopsbourne is covered, as the scheme runs across England and Wales. Air-to-water and ground source systems attract £7,500. Air-to-air gets £2,500, but only where it takes over from fossil-fuel heating and covers the whole home’s heating demand. As an MCS certified installer, we apply for it on your behalf.
Who has to arrange F-Gas leak checks?
The operator of the equipment, working with qualified engineers. Larger systems need regular checks: at least every 12 months from 5 tCO2e and every 6 months from 50 tCO2e. We will work out which band applies to yours.
Which manufacturers do you install and repair?
We work with the leading brands, from Mitsubishi Electric, Daikin and Fujitsu to Panasonic, Toshiba, LG, Samsung, Mitsubishi Heavy Industries and Hitachi. Send us the make and model if you have it.
Do I get paperwork after the visit?
Yes, on every job. A new system comes with commissioning details, F-Gas records and the manufacturer’s warranty information, while repairs and services get a written note of what was found and done.
Should I choose air-to-water or air-to-air?
Air-to-water suits homes with radiators and a cylinder; air-to-air suits rooms that need heating and cooling. The survey helps decide. We install both types.
Which accreditations do you hold?
F-Gas company certification, NICEIC approval for electrical work and MCS certification for heat pumps, plus Checkatrade membership. Engineers who handle refrigerant hold their own F-gas qualifications as well.
Homes in Bishopsbourne and heat pumps
About 79% of households live in detached or semi-detached houses, according to Census 2021 figures. Finding room for the outdoor unit and a cylinder is seldom a problem in homes like these.
Goodnestone Park, roughly 4.1 miles east, is a reminder to check your home’s listing status: permitted development doesn’t cover listed buildings. Older homes near Church of St Mary may need extra checks for planning and heat loss before a heat pump is designed.
Bishopsbourne is about 4 miles south-east of Canterbury, in Kent. Whether you are in the middle of Bishopsbourne or further out, our engineers cover air source heat pumps, from small jobs to large ones. Bishopsbourne is one of 922 places in Kent we cover. Eastbourne, roughly 48 miles off, has its own page on this site.
We work across the CT4 postcode area. Local streets include The Street, Park Lane and Crows Camp Road, and we cover them all. Neighbouring places we cover include Kingston (1 mile south-east), Bridge (1 mile north), Out Elmstead (1 mile south-east), Marley (1 mile south) and Patrixbourne (2 miles north). Within a short drive, we also cover Ashford (13 miles south-west), Canterbury (4 miles north-west), Margate (15 miles north-east) and Dover (10 miles south-east).
Near you in Bishopsbourne
In Bishopsbourne, that means homes and buildings near The Mermaid Inn. For rail, the closest station is Bekesbourne station, roughly 2.2 miles north. A little further out are Canterbury Castle (4.1 miles north-west) and Kent and Canterbury Hospital (3.2 miles north-west).
From one of our customers
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead