Surrey · Heat pump installation
Heat pump installation in Belmont, Surrey
Air source heat pumps for Belmont, from F-Gas certified engineers, with the manufacturer’s warranty terms explained on your quote. We reply to enquiries the same working day.
- Checking emitters for a heat pump
- Checking whether planning permission is needed
- A boiler that is getting old
The process
We book the visit for a day and time that suit you, and we keep you posted if anything changes. On arrival, the engineer compares the job with the survey, your pictures or the details you gave us. Anything unexpected is raised with you before we go further. From there, the work takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes. Photos of the existing unit and its label help with repairs and servicing near Belmont.
- We start with your plans and the property.
- We survey for heat loss and look at radiators, cylinder space and outdoor unit options.
- You get our view on the right type for the house, and on whether the Boiler Upgrade Scheme applies.
- We install the heat pump and connect it up.
- We commission it, complete the MCS certificate and show you how to use it.
Before we arrive
- Move furniture away from the wall where we’ll be working
- Tell us about any building rules, permits or sign-in
- Tell us about access, such as roof hatches, high walls or locked plant areas
Getting a quote
Here’s what helps us quote: where the property is and what kind of building it is, a few pictures, the brand and model of anything already fitted and any symptoms, from error codes to drips. Then give us a ring on 07833 053749 or use the quote form.
Advice
Air source heat pumps in Belmont, done properly
In England, an air source heat pump on a house can often go in under permitted development rights. Conditions include a maximum outdoor unit size of 1.5 m³, compliance with MCS 020(a), use for more than cooling alone and a site outside the curtilage of a listed building. We look at the planning position for your home during the survey. The work covers hot water cylinders, radiator systems and air-to-air heat pumps, and common reasons people get in touch are checking whether planning permission is needed and replacing a combi boiler with a heat pump.
Homes around Belmont usually have space for an outdoor unit and a hot water cylinder, so the main questions are heat loss, radiators and the electrics.
Nothing is signed off by word of mouth: commissioning details and F-Gas records for a new system, a note of the fault and the fix for a repair, or a service record. Keep it with the system’s paperwork, because it helps with any later warranty question.
- Where
- Belmont (SM2, SM5)
- Wider area
- Surrey
- Accreditations
- NICEIC approved, F-Gas certified, MCS
- Price guide
- £8,000–£16,000 (0% VAT on homes), before the grant
- Quotes
- Fixed after a survey or pictures
- Replies
- We reply the same working day
- Call
- 07833 053749
- Checked
- 30 October 2026
Pricing air source heat pumps in Belmont
Some jobs are bigger than they look, and some smaller. What affects the quote:
- How many units are involved
- What we find on the survey or diagnosis
- Whether it’s a one-off job or part of a maintenance contract
What you pay depends on the type of system and how many units are involved, the access and the parts and time the job needs. We give you a fixed price before any work starts, so there are no surprises.
What we need to know
Photos and a few facts are often enough to price a simple job. Useful things to send:
- The paperwork from the last service, if you have it
- The make and model of the system, from the label
- Where the outdoor unit is, or where you’d like it
For air source heat pumps in Belmont, give us a ring on 07833 053749 or fill in the contact form. Tell us what kind of property it is and what you’d like done, plus some pictures if they’re to hand. Enquiries get a reply the same working day.
Why deal with it now?
The two types suit different homes and needs. Air-to-water works with radiators and a cylinder, with a £7,500 grant for eligible homes, while air-to-air heats and cools rooms and has a £2,500 grant only in limited cases, and we explain which fits your home. Getting the date in early helps for a job in a place like Belmont.
Our prices page shows typical ranges, but your price depends on the job in front of us. Call for a fixed-price quote, and we will talk you through it.
What you get with us
- A fixed price before any work starts
- Listed on Checkatrade
- Clear warranty information from the manufacturer
- We reply to enquiries the same working day
Read what air conditioning costs and how to check a contractor.
Also near Belmont
Other services in Belmont
Homes in Belmont and heat pumps
The last census (2021) found about 63% of households in detached or semi-detached houses. Houses typically have space for an outdoor unit and a hot water cylinder.
If your home is one of the older properties near Church of St John, the survey checks whether it’s listed or in a conservation area before the outdoor unit position is chosen.
Belmont is about 2 miles south of Sutton, in Surrey. Across the SM2 area, we cover air source heat pumps. Count every place we list in Surrey and you reach 395, with Belmont on the list.
The closest recent job we can point to from Belmont was on Nork Way, Banstead (SM7), about 1 mile south: installing a Mitsubishi Electric multi-split system serving four bedrooms, the study and the living room as part of a whole-house renovation.
Every address in SM2 and SM5 is covered, from busy streets to back roads. Streets in the area include The Avenue, Sandy Lane and Downs Road, each of them within reach. We also cover the places around Belmont: Cheam (1 mile north-west), Cuddington (2 miles north-west), North Looe (2 miles west), Nork (2 miles south-west) and North Cheam (2 miles north). Further out, we also cover Epsom (3 miles west), Horley (11 miles south), Redhill (7 miles south) and Reigate (7 miles south).
What’s near Belmont
Around Belmont, our work takes us to homes and businesses near Howell Hill, Glaisdale School and Harris Academy Sutton. There’s a railway station in Belmont itself: Belmont station. A little further out are The Ashley Centre (3 miles west) and Honeywood Museum (2.2 miles north-east). The countryside around Belmont includes Duppas Hill and Belmont Pastures.
Do you need air source heat pumps in Belmont?
Many people look at heat pumps when an oil, LPG or gas boiler is getting old. Planning the change before the boiler fails gives you time to survey, design and apply for any grant, rather than rushing a replacement in winter.
What we’re most often called about:
- An oil, LPG or gas boiler near the end of its life
- Planning and permitted development questions
- Questions about where the outdoor unit can go
If you live near Belmont station, the survey compares air-to-water and air-to-air for your home before anything is quoted.
What your quote should include
- Whether the quote shows VAT clearly
- Who does the electrical work, and whether they can certify it
- Whether they hold F-Gas company certification, not just individual qualifications
Belmont questions
Is planning permission needed for a heat pump in Belmont?
It comes down to the building and the spot chosen for the outdoor unit. The centre of Belmont is in a conservation area. On a house, an air source heat pump can often go ahead under permitted development, with an outdoor unit of no more than 1.5 cubic metres and an installation that meets MCS 020(a), which includes a noise check. Those rights don’t reach the grounds of a listed building, and conservation areas rule out walls or roofs facing a road. If that might affect you, we ask the planning department at Sutton council, typically the authority for Belmont.
Does the Boiler Upgrade Scheme cover homes in Belmont?
Belmont is in England, where the Boiler Upgrade Scheme runs. It gives £7,500 towards an air-to-water or ground source heat pump, or £2,500 towards an air-to-air heat pump that replaces the fossil-fuel heating and meets the whole home’s heating need. You do not apply yourself: the MCS certified installer does, which is us.
Can I do the refrigerant work myself?
Not the refrigerant work. Under the F-gas rules, it must be done by qualified engineers from a certified company, and a new electrical circuit is notifiable building work unless a registered competent person does it.
Are you F-Gas certified?
F-Gas company certification, NICEIC approval for electrical work and MCS certification for heat pumps, plus Checkatrade membership. Our engineers also hold the individual F-gas qualifications needed to work on refrigerant.
When will I hear back?
You’ll hear from us the same working day. For a breakdown that can’t wait, call our 24/7 emergency line.
Is Belmont in your area?
Yes. Our area takes in London and the counties of the South East, and that includes Belmont.
Can you come out in an emergency?
Yes, day and night. When you call, tell us the make, what’s happening and any error code, and we’ll talk you through the next steps.
What a customer said
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager