Hertfordshire · Heat pump installation
Bearton air source heat pumps
Air source heat pumps across Bearton and nearby, from the first look to the final check and a fixed price agreed before we start.
- Planning and permitted development questions
- Checking eligibility for a heat pump grant
- Wanting to stop using oil, LPG or gas for heating
Air source heat pumps in Bearton
An air-to-water heat pump costs £8,000–£16,000 (0% VAT on homes), before the grant. In England and Wales, the Boiler Upgrade Scheme offers a £7,500 grant towards an eligible air-to-water installation and the installer makes the application. Eligibility depends on the property, so we confirm it before anything is agreed. Typical jobs include plans to switch to electric heating with a heat pump and comparing heat pump types, on homes heated by oil, LPG or gas, air-to-air heat pumps and underfloor heating.
If your home near Bearton has no mains gas, the grant can be bigger. Until March 2027, homes on oil or LPG without mains gas can get an extra £1,500 through the Boiler Upgrade Scheme, for an air source or ground source heat pump.
Nothing is signed off by word of mouth: commissioning details and F-Gas records for a new system, a note of the fault and the fix for a repair, or a service record. File it with the manual, because it helps with any later warranty question.
- Location
- Bearton (SG5, SG4)
- Region
- Hertfordshire
- Accreditations
- NICEIC and F-Gas, MCS
- Replies
- Same working day
- Price
- Fixed, in writing
- Prices
- Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
- Call
- 07833 053749
- Page updated
- 30 October 2026
How the job changes from property to property
VAT on heat pumps
Please treat this as general guidance rather than tax advice.
Outdoor unit position and planning
Flats and blocks of flats have different limits, and Article 4 directions can remove rights. Listed building consent is a separate matter, and we check the position for your property.
Also in Bearton
Landlords, agents and facilities managers
The F-gas rules share responsibility for leak checking between the equipment’s operator and the service technicians. In a let or managed building, it’s worth agreeing who that operator is and we are happy to deal with whoever it is.
Managing agents often deal with us directly. Send the address, what’s needed and how access works and we will come back with a fixed-price quote.
Homes in Bearton and heat pumps
At about 33 miles from central London, Bearton sits inside the area we cover across London and the South East.
Period properties close to St Mark's can suit a heat pump, though insulation and any heritage protection are checked first. Sizing comes from the heat each room loses on a cold day, not from the size of the old boiler.
Bearton is about 1 mile north-west of Hitchin, in Hertfordshire. Bearton gets the same approach as every job we take on: a look at the job first, a fixed-price quote and written records at the end. We cover 381 places across Hertfordshire, large and small. You can also see our page for London, about 33 miles away.
Lucas Lane, Water Lane and Gaping Lane and the roads off them are all inside our area. The A600 serve Bearton, which keeps journeys to surveys and visits simple. Close to Bearton, our area also takes in Westmill (1 mile west), Hitchin (1 mile south-east), Ickleford (1 mile north), Benslow (1 mile south-east) and Walsworth (1 mile east). Within a short drive, we also cover Stevenage (6 miles south-east), St Albans (14 miles south), Welwyn Garden City (12 miles south) and Harpenden (10 miles south).
Local landmarks in Bearton
Locally, jobs take us to houses, flats and workplaces close to The Priory School, Butts Close and St Mary's Church and the streets around them. For rail, the closest station is Hitchin station, about 1 mile east. Other landmarks nearby include North Hertfordshire Museum (0.6 miles south) and Fairfield Hospital (3.4 miles north-east). The countryside around Bearton includes Markham's Hill and Oughtonhead Nature Reserve.
Questions from Bearton
Do I need planning permission for a heat pump in Bearton?
The answer turns on the property and where the outdoor unit would sit. Central Bearton is a short walk from the Butts Close, Hitchin Conservation Area. A heat pump on a house can be permitted development if it meets the conditions, including the MCS noise check, but not within the grounds of a listed building, and in a conservation area the outdoor unit cannot face a road. Where needed, we check with the local planning authority (for Bearton, usually North Hertfordshire council).
Is Bearton within the area you cover?
Yes, and the size of the place makes no difference to how we work. We are based in East Grinstead and plan each visit so the job can be finished in one trip where possible.
Can landlords and managing agents book you?
Yes. From one rented home to commercial buildings, we work the same way: a look first, a fixed-price quote and written records.
How much time does a heat pump install need?
As a guide, it takes a few days for most air-to-water installations, with air-to-air systems often quicker. We plan the work so you’re without heating for as little time as possible and agreed before work begins.
What does an air-to-water heat pump cost?
An air-to-water heat pump costs £8,000–£16,000 (0% VAT on homes) before the grant. Eligible homes in England and Wales can get £7,500 through the Boiler Upgrade Scheme though not every home qualifies.
Do you provide F-Gas records?
Yes. It’s your proof of what was done: a dated note of the work, with refrigerant details where they apply.
Do you have a 24/7 line?
Yes, day and night. When you call, tell us the make, what’s happening and any error code, and we will advise on what to do next.
What we do, step by step
Everything the job needs comes with us, from tools and test equipment to ladders and dust sheets. You only need to give us clear access to the units, or their planned positions, and to the fuse board. On site, the work takes a few days on site, depending on the cylinder, the radiators and the pipework involved. Because we plan from pictures or a survey, a job in Bearton can usually be finished in one visit.
- First, a chat about the property and your goals for the heating.
- A survey covers heat loss, radiators, hot water and where the outdoor unit could sit.
- We recommend air-to-water or air-to-air and check the grant position.
- Installation follows on the agreed dates.
- We commission it, complete the MCS certificate and show you how to use it.
How to prepare
- Tell us about access, such as roof hatches, high walls or locked plant areas
- Tell us about parking and loading
- Tell us about any building rules, permits or sign-in
Ask for a quote
The quickest way to a quote is to send photos: the inside and outside of the property where the work is, plus the rating plate of any unit already there. Add the address and what you’d like done, and simple jobs can often be priced without a visit.
Related advice
What air source heat pumps can’t fix
We will not sell you work that doesn’t address the problem, so these are the things it won’t cover:
- Planning decisions, which rest with the council
- Any gas work on the existing boiler
- Insulation work, such as loft or cavity wall insulation
Not sure which it is? You can give us a ring on 07833 053749, or email if that’s easier and we’ll tell you honestly.
Where we work
- Air-to-water heat pumps
- Underfloor heating
- Radiator systems
- Hot water cylinders
- Homes heated by oil, LPG or gas
- Air-to-air heat pumps
What a customer said
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager