Hertfordshire · Heat pump installation
Heat pump installation in Ickleford, Hertfordshire
Our engineers work in Ickleford on heat pump installation. Diagnosis first, a fixed price and proper paperwork when we finish.
- Moving away from fossil-fuel heating
- Choosing between air-to-water and air-to-air
- Checking whether planning permission is needed
Ickleford: your questions answered
Do you cover smaller places like Ickleford?
We do. Villages and hamlets get the same service as the bigger towns. Visits to smaller places are planned so the engineer arrives with what the job needs.
Will a heat pump in Ickleford need planning permission?
It depends on the property. Central Ickleford sits inside the Ickleford Conservation Area. Heat pumps on houses are often permitted development, but listed buildings need consent and conservation areas restrict outdoor units facing a road. Where it’s needed, we check with the local planning authority (for Ickleford, typically North Hertfordshire council).
Am I eligible for a heat pump grant?
Eligibility depends on the property and the scheme rules. The scheme gives £7,500 for eligible air-to-water or ground source systems, and £2,500 for air-to-air only under strict conditions, and we check before you commit.
Do you work on all makes?
We work with the leading brands, including Mitsubishi Electric, Daikin, Fujitsu, Panasonic, Toshiba, LG, Samsung, Mitsubishi Heavy Industries and Hitachi. Tell us the make and model and we’ll take it from there.
What VAT do I pay on a heat pump?
Not on a home installation at the moment: HMRC zero-rates heat pumps installed in residential accommodation until 31 March 2027, and 5% applies after that. Businesses and hotels pay the standard rate, and with air-to-air we confirm the VAT on the quote. This is general information, not tax advice.
How do you keep the place clean during the work?
We start with protection: dust sheets over floors and anything close to the work. Holes and fixings are agreed with you, and we clean up afterwards before we leave.
Can you look at a system you didn’t fit?
Yes. We start with a proper look and tell you honestly what we find, including anything about the original installation that needs putting right. You get a fixed price before any work goes ahead.
Air source heat pumps in Ickleford
In England, an air source heat pump on a house can often go in under permitted development rights. The conditions include an outdoor unit of no more than 1.5 m³ and compliance with MCS 020(a), and the unit cannot be used solely for cooling or sit within the curtilage of a listed building. We look at the planning position for your home during the survey. If the problem is replacing a combi boiler with a heat pump and moving away from fossil-fuel heating, we can help.
Homes around Ickleford normally have room outside for a heat pump, so the design focuses on heat loss and radiators.
Looking after a system is mostly common sense: clear space around the outdoor unit, the cleaning the manual describes and a service at the recommended interval. That also helps where the warranty terms ask for regular servicing.
- Place
- Ickleford (SG5)
- Region
- Hertfordshire
- Price guide
- £8,000–£16,000 before the grant, 0% VAT on homes
- Pricing
- Fixed-price quote after a site survey
- Credentials
- F-Gas certified, NICEIC approved, MCS
- Phone
- 07833 053749
- Reviewed
- 30 October 2026
What air conditioning won’t do
We won’t sell you work that does not address the problem, so these are the things it will not cover:
- Getting planning permission or listed building consent on your behalf
- Gas boiler work, such as disconnecting the old boiler, which needs a Gas Safe registered engineer
- Tax advice on your own circumstances
If you’re not sure, just call 07833 053749 or drop us a line and we’ll give you a straight answer.
What we work on in Ickleford
- Air-to-water heat pumps
- Radiator systems
- Homes heated by oil, LPG or gas
- Underfloor heating
- Air-to-air heat pumps
- Hot water cylinders
Air source heat pumps around Ickleford
Ickleford is about 34 miles from central London, well within the area we cover from our base in East Grinstead.
A heat loss calculation decides the size of heat pump your home needs. Older homes near Church of St Katharine may need extra checks for planning and heat loss before a heat pump is designed.
Ickleford is about 2 miles north of Hitchin, in Hertfordshire. Whether you are in the middle of Ickleford or further out, our engineers cover air source heat pumps, from a single room to a whole building. Our Hertfordshire coverage runs to 381 places, and Ickleford is one of them. The nearest of our city pages is London, around 34 miles from Ickleford.
Our engineers cover all of SG5 and the streets around it. Our engineers work on Greenfield Lane, Boswell Drive and Chambers Lane and the roads around them. Places around Ickleford that are also on our list: Bearton (1 mile south), Westmill (1 mile south), Walsworth (1 mile south-east), Hitchin (2 miles south) and Benslow (2 miles south-east). Further out, we also cover Stevenage (6 miles south-east), St Albans (15 miles south), Welwyn Garden City (13 miles south) and Harpenden (11 miles south).
Near you in Ickleford
We fit and service air conditioning in homes and premises around The Priory School, Butts Close and Plume Of Feathers Public House and the streets around them. For rail, the closest station is Hitchin station, about 1.5 miles south-east of the centre. Well-known places in the area include Garden City Collection Study Centre (1.4 miles north-east) and Fairfield Hospital (2.6 miles north-east). Not far away are Oughtonhead Nature Reserve and Markham's Hill.
System by system
Air-to-water heat pumps
Air-to-water systems take heat from the air and put it into your central heating and hot water. It replaces the boiler as the main heat source and we install it to MCS standards.
Heat loss surveys
Getting the survey right avoids undersized or oversized systems, and both cause problems.
What else we do in Ickleford
What we do, step by step
Our engineers arrive at the time agreed with you and run through the plan before anything else. Floors and furniture near the work are covered with dust sheets, and the electrics are made safe before any panel comes off. On site, it takes from a couple of days to around a week, depending on the system and how much of the heating changes. For a village like Ickleford, tell us about narrow lanes, gates and parking when you book.
- It begins with your house and the heating it relies on now.
- Every room’s heat loss is worked out on site.
- The design covers the heat pump, emitters, hot water and outdoor unit.
- Cost, grant and VAT appear on one fixed-price quote.
- Installation, commissioning and MCS registration complete the job.
Getting ready for the visit
- Let us know where we can park and unload
- Arrange for someone to be there to let us in
- Mention any roof access, ladders or high-level work
Getting a quote
Some jobs can be priced from pictures, while others need a survey. Multi-room systems, commercial buildings and anything with a long or hidden pipe route are normally surveyed first. Either way, the quote is fixed before anything goes ahead.
Advice
Keeping the system healthy
Systems last better with the right care. Here’s what we suggest:
- Keep the outdoor unit clear all year
- Leave indoor units unobstructed
- Keep up with insulation and draught-proofing
Handover includes the controls and how to get the best from a heat pump. Steady running suits a heat pump better than switching on and off, and we’ll explain the settings for your home.
Keep radiators and indoor units unobstructed so the heat can get into the room.
A customer’s words
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager