Hampshire · Heat pump installation

Air Source Heat Pumps in Bartley

Expert air source heat pumps for Bartley: diagnosis first, then a fixed-price quote, the work and written records. Ask us for a fixed-price quote.

  • Checking whether planning permission is needed
  • Questions about the Boiler Upgrade Scheme
  • Questions about where the outdoor unit can go

Air source heat pumps in Bartley

Pricing air source heat pumps in Bartley

Your quote is based on your property. We take into account:

  • Whether it’s a one-off job or part of a maintenance contract
  • What state the existing equipment is in
  • Whether it’s a simple split or a larger system

One room or a whole building, we price it on the same basis: what needs doing, how we get to it and what it needs. You’ll have a fixed price before we start, with VAT shown clearly.

Asking for a quote

There’s no need for technical detail. Just send:

  • The outdoor side of the property, including any roof or flat area
  • The rating plate or label on any existing unit
  • Where the property is and what kind of building it is

Photos are enough for some jobs; others need a visit first. Bigger systems, commercial sites and awkward pipe routes are normally surveyed on site. Either way, the quote is fixed before anything goes ahead.

Air source heat pumps in Bartley

We begin with a room-by-room heat loss survey. It shows how much heat each room needs on a cold day, so the heat pump and the radiators or indoor units can be sized properly. Sizing by rule of thumb isn’t good enough. Typical jobs include moving away from fossil-fuel heating and checking emitters for a heat pump, across homes heated by oil, LPG or gas, underfloor heating and hot water cylinders.

In a place like Bartley, some homes are listed, because permitted development does not apply within the grounds of a listed building, so consent comes first.

Some manufacturers make regular servicing by a qualified engineer a condition of their warranty. Where yours does, a regular service with us keeps that side in order, and every service is written up.

Place
Bartley (SO40)
Wider area
Hampshire
Enquiries
We reply the same working day
Accreditations
NICEIC and F-Gas, MCS
Quote
Fixed, in writing
Typical price
Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
Phone
07833 053749
Checked
30 October 2026

Bartley questions

Can I fit a heat pump in Bartley without planning permission?

That depends on the building and where the outdoor unit goes. There’s a conservation area, the Forest North East Conservation Area, close to central Bartley. The permitted development rules for heat pumps leave out listed buildings and stop outdoor units going on road-facing walls or roofs in conservation areas. Anything outside the rules needs an application, and we raise it with the local planning authority (for Bartley, typically New Forest council) first.

Does the Boiler Upgrade Scheme cover homes in Bartley?

Bartley is in England, where the Boiler Upgrade Scheme runs. It gives £7,500 towards an air-to-water or ground source heat pump, or £2,500 towards an air-to-air heat pump that replaces the fossil-fuel heating and meets the whole home’s heating need. As an MCS certified installer, we apply for it on your behalf.

What does an air-to-water heat pump cost?

Air-to-water systems are £8,000–£16,000 (0% VAT on homes), before any grant. The final price depends on the heat loss survey, the radiators and the cylinder and the quote is fixed.

Will I get records for the system?

Yes, on every job. New installations come with commissioning details, F-Gas records and warranty information, while repairs and services get a written note of what was found and done.

Which manufacturers do you install and repair?

We work with the leading brands, including Mitsubishi Electric, Daikin, Fujitsu, Panasonic, Toshiba, LG, Samsung, Mitsubishi Heavy Industries and Hitachi. Send us the make and model if you have it.

Can I fit air conditioning or a heat pump myself?

Anything that involves the refrigerant needs an F-Gas qualified engineer from a certified company. That is the law, not just our preference, and manufacturers expect it for their warranty too. We can quote for the whole job, from supply to commissioning.

Do you protect the property while you work?

Protection goes down first: dust sheets over floors and anything close to the work. Any drilling is agreed with you first, and we clear up the dust and offcuts when we finish.

What we do, step by step

Our engineers bring the tools, gauges and access equipment the job needs. All we ask is clear access to the units, or to where they’ll go, and to the consumer unit. The visit takes from a couple of days to around a week, depending on the system and how much of the heating changes. A few photos help us make the most of a visit to Bartley.

  1. First we find out about the property, the heating you have now and what you are hoping for.
  2. On the visit we calculate what every room loses on a cold day, then check the radiators, room for a cylinder and outdoor unit options.
  3. A fixed-price quote follows, setting out the system, any grant that applies and the VAT.
  4. Fitting day: the outdoor unit is placed, the indoor side connected and the controls set up.
  5. Once it’s running correctly, the MCS certificate is issued and we show you the settings.

Before we arrive

  • Mention any roof access, ladders or high-level work
  • Have the make and model of any existing unit to hand
  • Let us know where we can park and unload

How to get a quote

Our prices page gives typical ranges, but your quote is based on your job, because every property is different. After a look at the job, by pictures or a survey, the price is fixed. To get going, phone 07833 053749 or send an email.

Ask for a quote

Read more

What air conditioning will not do

Before booking, it helps to know what’s not included:

  • Gas boiler work, such as disconnecting the old boiler, which needs a Gas Safe registered engineer
  • Planning approval where permitted development doesn’t apply
  • Draught-proofing and insulation upgrades

If you are not sure, just call 07833 053749 and we will give you a straight answer.

What we work on in Bartley

  • Homes heated by oil, LPG or gas
  • Air-to-air heat pumps
  • Underfloor heating
  • Radiator systems
  • Hot water cylinders
  • Air-to-water heat pumps

Heat pumps in Bartley: local notes

The last census (2021) found about 90% of households in detached or semi-detached houses. Houses normally have space for an outdoor unit and a hot water cylinder.

A heat loss calculation decides the size of heat pump your home needs. Grant applications go through the MCS certified installer, so that part is handled for you.

Bartley is about 2 miles west of Totton, in Hampshire. Whether you’re in the middle of Bartley or further out, our engineers cover air source heat pumps, from small jobs to large ones. In Hampshire alone we list 683 places, and Bartley is one. Our Guildford page covers places nearby, about 49 miles away.

All of SO40 is covered, from the main roads to the quietest streets. If you need air source heat pumps at a property on Chinham Road, Shepherds Close and Pundle Green or anywhere close by, our engineers can take on the work. Places around Bartley that are also on our list: Cadnam (1 mile north-west), Winsor (1 mile north-east), Copythorne (1 mile north), Woodlands (1 mile south-east) and Netley Marsh (1 mile east). We also work in nearby towns such as Winchester (15 miles north-east), Eastleigh (10 miles east), Chandler's Ford (9 miles north-east) and Hedge End (11 miles east).

Near you in Bartley

In Bartley, that means homes and buildings near Haywain pub, among other places. The nearest railway station is Ashurst New Forest station, about 2.2 miles south-east of the centre. Other landmarks nearby include National Dairy Museum (2.7 miles south-east) and Tatchbury Mount Hospital (1.8 miles north-east). Green spaces nearby include Copythorne Common.

Map of Bartley © OpenStreetMap contributors

After we have gone

Looking after the system is mostly common sense. Our tips:

  • Clear leaves and debris from the outdoor unit
  • Look at insulation alongside the heat pump
  • Keep the MCS certificate with the manufacturer’s paperwork

Equipment warranties come from the manufacturer. We explain the terms for your brand, including any servicing conditions.

Keep the outdoor unit clear of leaves, plants and stored items. It needs good airflow to collect heat from outside, so keep it clear all year.

What a customer said

“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”

James T., Crawley, office manager

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead