Kent · Heat pump installation
Anvil Green air source heat pumps
Our engineers work in Anvil Green on heat pump installation. A look at the job first, a fixed-price quote and written records at the end.
- Not knowing whether a grant applies
- Finding a place for the outdoor unit
- Moving away from fossil-fuel heating
What the work involves, system by system
The Boiler Upgrade Scheme
Eligibility depends on the property and the scheme rules, so we check before you commit.
Heat loss surveys
We look at walls, windows, floors, roofs and ventilation, and the size of each room.
How we handle air source heat pumps in Anvil Green
We install air source heat pumps in Anvil Green and across Kent, and we’re MCS certified. Air-to-water systems feed your radiators or underfloor heating and hot water cylinder, while air-to-air systems heat rooms directly through indoor units and can cool them too. We help you work out which suits your home. If the problem is not knowing whether a grant applies and questions about listed buildings or conservation areas, we can sort it out.
If your home in or near Anvil Green is heated by oil, LPG or electric heaters with no mains gas, the Boiler Upgrade Scheme adds an extra £1,500 until March 2027 for an air source or ground source heat pump, on top of the £7,500.
Nothing is signed off by word of mouth: commissioning details and F-Gas records for a new system, a note of the fault and the fix for a repair, or a service record. Keep it with the system’s paperwork, because it helps with any later warranty question.
- Location
- Anvil Green (CT4)
- Wider area
- Kent
- Price guide
- £8,000–£16,000 (0% VAT on homes), before the grant
- Credentials
- NICEIC and F-Gas, MCS
- Quote
- A fixed price before any work starts
- Replies
- Same working day
- Call
- 07833 053749
- Page updated
- 30 October 2026
How the visit works
The work area is kept tidy throughout, with sheets down and mess cleared as we go. Any holes, fixings or cable routes are agreed with you before we drill. On site, it takes a few days on site, depending on the cylinder, the radiators and the pipework involved. A note on how to find the property and where to park makes a visit to Anvil Green easier.
- We talk through your home, your current heating and what you want from a heat pump.
- The survey measures heat loss room by room and looks at radiators, hot water and the best spot for the outdoor unit.
- We send a fixed-price quote that shows the equipment, the grant position and the VAT.
- Fitting day: the outdoor unit is placed, the indoor side connected and the controls set up.
- The system is commissioned and registered under MCS, and we show you how to use it.
How to prepare
- Clear access to the fuse board
- Mention any parking restrictions near the property
- Arrange for someone to be there to let us in
Ask for a quote
Every quote shows the VAT clearly, and the rate that applies to your job is stated. VAT can differ between homes and businesses and between kinds of work, so we confirm it on the quote. To get one, call us on 07833 053749 or use the quote form.
Read more
Nearby places to Anvil Green
More services for Anvil Green
Air source heat pumps around Anvil Green
About 71% of households live in detached or semi-detached houses, according to Census 2021 figures. Detached and semi-detached houses typically have room for the outdoor unit and a cylinder.
Older homes near Church of St Bartholomew may need extra checks for planning and heat loss before a heat pump is designed. A heat loss calculation decides the size of heat pump your home needs.
Anvil Green is about 5 miles south-west of Wincheap, in Kent. Anywhere in CT4, we can help with air source heat pumps. Across Kent, we cover 922 places, Anvil Green among them. You can also see our page for Eastbourne, about 43 miles away.
Jobs in CT4 are looked at, quoted and booked the same way as anywhere else. Places around Anvil Green that are also on our list: Petham (2 miles north-east), Garlinge Green (2 miles north), Mystole (3 miles north), Upper Hardres (3 miles east) and Shalmsford Street (3 miles north). Larger places within reach include Ashford (8 miles south-west), Canterbury (6 miles north-east), Dover (13 miles east) and Sittingbourne (15 miles north-west).
Near you in Anvil Green
Locally, jobs take us to houses, flats and workplaces close to Compasses Inn, among other places. The closest station to Anvil Green is Chilham station, roughly 3.1 miles north-west. Well-known places in the area include Chilham Castle (3.5 miles north-west) and Kent and Canterbury Hospital (5.1 miles north-east).
Rented and managed buildings
Portfolio owners often want one contractor and one number. Our area covers Greater London and the South East, so a run of properties can go into one programme and kept to a regular schedule.
We work for landlords, letting agents and managing agents as well as homeowners and businesses. Tell us who the contact on site is and who should receive the paperwork, and we’ll keep everyone informed.
Common questions in Anvil Green
Is the heat pump grant available in Anvil Green?
Anvil Green is in England, where the Boiler Upgrade Scheme runs. The grant is £7,500 for an air source (air-to-water) heat pump and £2,500 for an air-to-air system that replaces the existing fossil-fuel heating. The installer applies, and we are MCS certified.
Can I fit a heat pump in Anvil Green without planning permission?
There’s no single answer: the building and the outdoor unit position decide it. Central Anvil Green sits inside the Anvil Green Conservation Area. A heat pump on a house can be permitted development if it meets the conditions, including the MCS noise check, but not within the grounds of a listed building, and in a conservation area the outdoor unit cannot face a road. Where necessary, we check with the local planning authority (for Anvil Green, typically Canterbury City council).
Can I fit air conditioning or a heat pump myself?
The refrigerant side has to be done by a qualified engineer working for an F-Gas certified company. That is the law, not just our preference, and it also matters for the manufacturer’s warranty. We can quote for the whole job, from supply to commissioning.
Do you work on all makes?
The main ones, including Mitsubishi Electric, Daikin, Fujitsu, Panasonic, Toshiba, LG, Samsung, Mitsubishi Heavy Industries and Hitachi. For new systems, we recommend a brand and model to suit the job and tell you why.
How soon will you get back to me?
On the same working day you contact us. Then we agree a date that works for you, and you get a fixed price before any work goes ahead.
Do you cover Anvil Green?
Yes. Our engineers work in Anvil Green, within the South East and London area we cover. Our base is in East Grinstead, West Sussex.
Do you provide F-Gas records?
Yes. It’s the record a manufacturer or the next engineer will ask to see: the date, the work, and any refrigerant added or recovered.
Before you call an engineer
Leave the units and pipework where they are. Moving a unit involves the refrigerant circuit, so it needs an F-Gas qualified engineer, and the electrics need care too. If you need something moved, we can quote for it.
There are a few things you can safely do yourself: keep the outdoor unit clear of leaves, plants and clutter, check the settings and the remote, and follow the cleaning the manual describes. Opening up the units, the electrics and the refrigerant circuit are a job for us.
What a customer said
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead