Medway · Air conditioning installation
Rochester air conditioning
Air conditioning for Rochester, from F-Gas certified engineers, with warranty terms explained brand by brand. Enquiries answered the same working day.
- Old electric heaters you’d like to replace with something more efficient
- Fans and portables that don’t keep up
- Working from home in a room that gets too warm
The process
Everything the job needs comes with us, from tools and test equipment to ladders and dust sheets. You only need to give us clear access to the units, or their planned positions, and to the fuse board. On site, the work takes a day or more, depending on the number of rooms, the pipe routes and the access. Access to the outdoor unit position is the main thing to tell us about in Rochester.
- First comes a site survey, or photos and measurements for a straightforward job.
- You receive one fixed figure covering the kit, the fitting and the positions we agreed.
- The units go up and the pipework, cable and condensate drain are run neatly between them.
- Power is wired in, the joints are proved leak-tight under pressure and a vacuum pump draws out air and moisture.
- The system is commissioned and checked in every mode, and we hand over the controls, F-Gas records and warranty information.
Preparing for the visit
- Unlock any gate, garage or side passage we need
- Let us know if the units are on a roof, a high wall or in a locked area
- Find the manual or the paperwork for the system, if you have it
Ask for a quote
Some jobs can be priced from photos, while others need a survey. Multi-room systems, commercial buildings and anything with a long or hidden pipe route are normally surveyed first. Either way, the quote is fixed before anything goes ahead.
Read more
Air conditioning in Rochester, done properly
Any installation we do in Rochester follows the same process as everywhere else we work: a site survey, or photos for simple jobs, then a fixed-price quote, the installation, commissioning and F-Gas records. You know the price before we start and the paperwork is in your hands when we finish. For air conditioning in Rochester, one call covers the survey, the fixed-price quote, the installation and the F-Gas paperwork, wherever you are in Medway.
Air conditioning in a town like Rochester typically means a house, sometimes a flat or a converted building in the centre. People usually start with the room that gets hottest: a bedroom, a home office or a conservatory, and a multi-split can add more rooms later.
Whatever the visit, you get a written record: commissioning details for an installation, a fault and repair note for a repair, or a record of the service. File it with the manual so it’s to hand next time.
What air conditioning cannot fix
An honest diagnosis matters more to us than a booking, so here’s what this work cannot put right:
- Work that needs permission from a landlord or the council
- Stuffy rooms that need fresh air rather than cooling
- A building fabric problem such as single glazing or no loft insulation
Not sure which it is? You can give us a ring on 07833 053749 and we will tell you honestly.
What the work covers
- VRF systems
- Wall-mounted split systems
- Ceiling cassettes
- Ducted systems
- Air-to-air heat pumps
- Multi-split systems
Places near Rochester
Also in Rochester
What the work involves, system by system
Wall-mounted split systems
For one room, a wall-mounted split is often the simplest answer. One unit inside, one outside, connected by pipework, a cable and a drain, routed as agreed on the survey.
Ceiling cassettes
For wide rooms, a cassette spreads the air more evenly than one wall unit, and the slim grille sits neatly in the ceiling.
Air conditioning around Rochester
The coast is only about 3 miles from Rochester. Salt air is hard on outdoor units, so we site them out of the worst of the sea wind where we can, and can suggest models with corrosion-protected coils where the manufacturer offers them. About 46% of homes across Rochester and its surrounding area were built before 1919, according to the Valuation Office Agency’s council tax figures, and about 40% of households live in terraced houses, according to Census 2021 figures. Older properties often mean solid walls and period details, so pipe runs are planned to stay neat and out of sight. Terraces have little side access, so the outdoor unit usually goes on the rear wall or a flat roof, with the pipe run kept short.
Plenty of people near Rochester station split the week between the train and a spare room, and that spare room is often the first to get a unit. Restoration House (roughly 0.4 miles south-east) shows the area has its share of heritage. A listed home needs consent before an outdoor unit or pipework goes on.
Rochester is about 27 miles east of London, in Medway. Whether you are in the middle of Rochester or further out, we cover air conditioning, from small jobs to large ones. We cover 68 places across Medway. Bromley is in our area too, around 21 miles away.
Streets in the area include High Street, Gundolph Square and Station Road, all of which are in our area. Our working area takes in ME2, ME1, ME3 and ME4. Neighbouring places we cover include Strood (1 mile west), Borstal (1 mile south-west), Cuxton (2 miles south-west), Lower Bush (3 miles west) and North Halling (3 miles south-west). Further out, we also cover Gillingham (4 miles east), Chatham (3 miles south-east), Rainham (5 miles south-east) and Park Wood (5 miles south-east).
Landmarks near Rochester
We fit and service air conditioning in homes and premises around Former Ordnance Store At Chatham Gun Wharf, Fort Pitt Grammar School and Broomhill Park, among other places. Nearby too are Temple School (1.2 miles north) and Royal Crown Hotel (under half a mile east). Rochester has its own railway station: Rochester station. Well-known places in the area include Rochester Castle (under half a mile east) and Huguenot Museum (under half a mile east). Not far away are Gad's Hill and Rede Common.
Your questions about air conditioning in Rochester
Do I need planning permission for air conditioning in Rochester?
It depends on the property. The Historic Rochester Conservation Area is close to the centre of Rochester. Put simply: reversible systems on houses can be permitted development, cooling-only ones can’t, listed buildings need consent, and conservation areas limit outdoor units facing a road. When your property needs a decision, we contact Medway council, which is typically the planning authority for Rochester.
Do you cover Rochester for air conditioning?
Yes. Rochester is one of the places we cover. Just call us on 07833 053749 or email us with a few details.
What does F-Gas certified mean?
Companies working on equipment that contains F gas must be certified by an approved body, and the engineers need their own qualifications. It means the refrigerant in your system is handled legally.
Who is responsible for leak checks?
Responsibility is shared between the operator, normally whoever owns or controls the equipment, and the service technicians. The interval depends on the refrigerant charge, measured in tonnes of CO2 equivalent: at least yearly for 5 to under 50 tCO2e, and every 6 months for 50 to under 500 tCO2e.
Can I use air conditioning to heat a room?
Most of the time, yes: modern splits are usually heat pumps, so they heat as well as cool. The Energy Saving Trust notes that air-to-air heat pumps are sometimes referred to as air conditioning. Some cooling-only models exist, so we confirm it for the model on your quote.
Do you provide F-Gas records?
Yes. It’s your proof of what was done: a dated note of the work, with refrigerant details where they apply.
Is air conditioning possible in a flat?
Often, yes, but there are extra steps. You will typically need the landlord’s or management company’s consent for the outdoor unit and the pipe route and the lease will say. Permitted development rules for flats are also tighter than for houses, so we point out anything that may need permission on the survey. This is general information, not legal advice.
Pricing air conditioning in Rochester
We quote each job individually. These are the things that affect it:
- Whether it’s a simple split or a larger system
- Whether it’s a one-off job or part of a maintenance contract
- The number of rooms, units or zones
The pipe route, the height of the units and how we reach them can all change the price. We take each of them into account, and the price is fixed before we start.
Before you get in touch
Photos and a few facts are often enough to price a simple job. Send what you can of the following:
- A short video of any fault, such as a noise or a flashing light
- Your installation or service records
- A few photos of the room and the wall the unit is on, or will go on
Every quote starts with a look at the job, either on a site survey or, for simple jobs, from your photos and details. Then you get a fixed price before any work starts.
A customer’s words
“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”
David W., Haywards Heath