Kent · Heat pump installation
Wickhambreaux air source heat pumps
We cover Wickhambreaux for air source heat pumps. A look at the job first, a fixed-price quote and written records at the end.
- Deciding on the outdoor unit position
- Questions about listed buildings or conservation areas
- Checking eligibility for a heat pump grant
Air source heat pumps in Wickhambreaux: the local picture
The 2021 Census found about 76% of households in detached or semi-detached houses. Finding room for the outdoor unit and a cylinder is seldom a problem in homes like these.
Period properties close to Church of St Andrew can suit a heat pump, though insulation and any heritage protection are checked first.
Wickhambreaux is about 4 miles east of Canterbury, in Kent. We cover Wickhambreaux for air source heat pumps, along with the rest of Kent. Our area takes in 922 places across Kent, large and small. Bromley, roughly 51 miles off, has its own page on this site.
Our working area takes in CT3. You’ll find streets such as The Street, Wickham Court Lane and Seaton Road, each of them within reach. Close by, we work in Seaton (1 mile east), Ickham (1 mile south), Littlebourne (1 mile south-west), Bramling (1 mile south) and Bekesbourne (2 miles south-west). Larger places within reach include Canterbury (4 miles west), Margate (11 miles north-east), Dover (11 miles south-east) and Folkestone (14 miles south).
Around Wickhambreaux
Around Wickhambreaux, our work takes us to homes and businesses near The Rose Inn and Spires Academy, among other places. The closest station to Wickhambreaux is Bekesbourne station, roughly 2.6 miles south-west. Nearby you will also find Canterbury Castle (4.8 miles west) and St Martins Hospital (3.4 miles west).
How we handle air source heat pumps in Wickhambreaux
We begin with a room-by-room heat loss survey. That tells us how much heat the home needs, room by room so the system is sized to match. Sizing by rule of thumb is not good enough. The work covers underfloor heating, air-to-water heat pumps and air-to-air heat pumps, and the jobs we see most are working out whether radiators need upsizing and not knowing whether a grant applies.
In a place like Wickhambreaux, some homes are listed, and permitted development does not cover listed buildings, so consent comes first.
Some manufacturers make regular servicing by a qualified engineer a condition of their warranty. If that applies to your system, booking the service on time keeps the record straight, and every service is written up.
- Location
- Wickhambreaux (CT3)
- Wider area
- Kent
- Typical price
- Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
- Credentials
- F-Gas certified company, NICEIC approved, MCS
- Replies
- On the working day you ask
- Price
- Fixed after a survey or pictures
- Phone
- 07833 053749
- Updated
- 30 October 2026
Also near Wickhambreaux
More services for Wickhambreaux
How it works
The work area is kept tidy throughout, with sheets down and mess cleared as we go. Any holes, fixings or cable routes are agreed with you before we drill. On site, it takes a few days for most air-to-water installations, with air-to-air systems often quicker. A note on how to find the property and where to park makes a visit to Wickhambreaux easier.
- We start with your plans and the property.
- The survey checks heat loss, emitters, hot water and the outdoor unit position.
- We recommend air-to-water or air-to-air and check the grant position.
- We install the heat pump and connect it up.
- After commissioning, you get the MCS certificate and a handover.
Getting ready for the visit
- Move furniture away from the wall where we’ll be working
- Make sure someone can let us in at the agreed time
- Mention any managing agent or landlord rules we need to follow
Get a fixed-price quote
VAT is set out clearly on every quote, with the rate that applies to your job. Homes, businesses and different kinds of work can be treated differently for VAT, so we confirm it on the quote. For a fixed-price quote, give us a ring on 07833 053749 or drop us a line.
Advice
Looking after it afterwards
Once we’ve finished, these simple steps help:
- Don’t block radiators or indoor units with furniture
- Book a yearly service
- Find out the grant position at the survey
After commissioning, the installation is registered under MCS and you receive the certificate. Keep it with the manufacturer’s paperwork, as you may need it later.
A well-insulated home helps a heat pump, as lower heat loss means the system has less to do.
Why deal with it now?
If the emitters can’t give out enough heat, some rooms won’t get warm enough. The survey picks this up before installation. Small faults tend to grow, so it’s worth dealing with them early.
Typical ranges are on our prices page, but each job is priced on what it involves. Call for a fixed-price quote, and we will talk you through it.
Why book with us
- F-Gas company certification
- MCS certified for heat pumps
- Leading brands including Daikin, Mitsubishi Electric and Fujitsu
- Covering London and the South East
Read our cost guide or our accreditations.
FAQs for Wickhambreaux
Do you cover smaller places like Wickhambreaux?
Yes. Wickhambreaux is within the area we cover across London and the South East. We are based in East Grinstead and plan each visit so the job can be finished in one trip where possible.
Is a heat pump in Wickhambreaux permitted development?
That depends on the building and where the outdoor unit goes. Central Wickhambreaux sits inside the Ickham, Wickhambreaux and Seaton Conservation Area. A heat pump on a house can be permitted development if it meets the conditions, including the MCS noise check, but not within the grounds of a listed building, and in a conservation area the outdoor unit cannot face a road. Where necessary, we check with the planning department at Canterbury City council, normally the authority for Wickhambreaux.
Does the grant cover air-to-air heat pumps?
The air-to-air grant is £2,500, and only some homes qualify. The system has to replace the fossil-fuel heating and heat the whole home with an MCS certified installer.
Which accreditations do you hold?
AirCon Doctor is an F-Gas certified company, with NICEIC approval for electrical work and MCS certification for heat pumps. We are also Checkatrade members.
Whose job is it to check the system for leaks?
The operator of the equipment, working with qualified engineers. Larger systems need regular checks: at least every 12 months from 5 tCO2e and every 6 months from 50 tCO2e. We’ll work out which band applies to yours.
Do I get paperwork after the visit?
Yes. Every visit is written up, including F-Gas records for any refrigerant work. Keep them with the manual and the warranty documents.
What’s the price of a heat pump installation?
£8,000–£16,000 (0% VAT on homes) for air-to-water, before the grant. The final price depends on the heat loss survey, the radiators and the cylinder, and you get a fixed-price quote.
Signs you need air source heat pumps in Wickhambreaux
The Boiler Upgrade Scheme has made people ask whether their home could qualify. Whether you can get the grant depends on your home and the scheme conditions and we confirm it before you go ahead.
Keep an eye out for these signs:
- Not knowing whether a grant applies
- Questions about where the outdoor unit can go
- An oil, LPG or gas boiler near the end of its life
Historic houses such as Goodnestone Park, about 3.4 miles south-east, are a reminder that listed homes need consent before a heat pump goes in.
Questions to ask before booking
- Which VAT rate the quote uses, and why
- What happens if the job turns out to be different on the day
- Why the equipment they’re quoting suits the job
From one of our customers
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead