Kent · Heat pump installation
Well Head air source heat pumps
Need air source heat pumps in Well Head? We look at the job first, give you a fixed-price quote and do the work at a time that suits you, finishing with proper records.
- Checking whether planning permission is needed
- Checking eligibility for a heat pump grant
- Finding a place for the outdoor unit
How we handle air source heat pumps in Well Head
For an air-to-water heat pump, the price is £8,000–£16,000 (0% VAT on homes), before the grant. The Boiler Upgrade Scheme can provide £7,500 towards an eligible air-to-water system in England and Wales, and as the installer we apply for it on your behalf. Eligibility depends on the property, so we confirm it before anything is agreed. We’re often asked to deal with checking eligibility for a heat pump grant and radiators that may be too small for a heat pump, across hot water cylinders, underfloor heating and air-to-water heat pumps.
Older and listed homes in villages like Well Head need extra care, and permitted development doesn’t cover listed buildings, so consent comes first.
Refrigerant work is written up in the F-Gas records: the work carried out, the refrigerant involved and the quantities. Keep the records with the manual and the warranty documents, as a manufacturer or a future engineer may ask to see them.
- Location
- Well Head (CT3)
- Wider area
- Kent
- Quotes
- Fixed, in writing
- Credentials
- F-Gas certified, NICEIC approved, MCS
- Guide price
- £8,000–£16,000 before the grant, 0% VAT on homes
- Call
- 07833 053749
- Reviewed
- 30 October 2026
Heat pumps in Well Head: local notes
Valuation Office Agency council tax records put about 37% of homes across Well Head and its surrounding area before 1919, and about 78% of households live in detached or semi-detached houses, according to Census 2021 figures. Period properties can still suit a heat pump, but the design has to start from accurate heat loss figures. Detached and semi-detached houses typically have room for the outdoor unit and a cylinder.
Live in one of the older houses around St Mary's Church? Expect the survey to look closely at heat loss and at the building’s planning status. Goodnestone Park lies about 1.6 miles south. Owners of listed homes need consent before a heat pump is fitted, so it’s one of our first questions.
Well Head is about 6 miles east of Canterbury, in Kent. Homes and businesses alike in Well Head, our engineers can help with air source heat pumps. We reply to enquiries the same working day and our emergency line runs 24/7. Across Kent, we cover 922 places, and Well Head is one of them. We also work in Eastbourne, about 52 miles from Well Head.
Every address in CT3 is within our area, from busy streets to back roads. We also cover Wingham (1 mile north-west), Twitham (1 mile east), Wingham Well (1 mile west), Broomhill (1 mile north) and Wingham Green (1 mile west). Larger places within reach include Canterbury (6 miles west), Margate (11 miles north-east), Dover (9 miles south) and Folkestone (13 miles south).
Around Well Head
In Well Head, that means homes and buildings near The Red Lion pub. The closest station to Well Head is Adisham station, about 2 miles south-west. Well-known places in the area include St Martins Hospital (5 miles west). Open spaces near Well Head include Monk's Wall nature reserve.
How the visit works
Protection comes first: sheets over the floor and any furniture nearby, and we ask before moving anything. Then the electrics are made safe and the work begins. It takes a few days for most air-to-water installations, with air-to-air systems often quicker, and we tidy up before we leave. For a place like Well Head, the timing is set with you and the travel is our side of the planning.
- First, a chat about the property and your goals for the heating.
- A survey covers heat loss, radiators, hot water and where the outdoor unit could sit.
- We recommend air-to-water or air-to-air and check the grant position.
- Installation follows on the agreed dates.
- We commission it, complete the MCS certificate and show you how to use it.
Preparing for the visit
- Give us access to the outside wall, roof or yard where the outdoor unit sits
- Keep pets out of the rooms we are working in
- Clear a path to the units and the space around them
Get a fixed-price quote
VAT is set out clearly on every quote, with the rate that applies to your job. VAT can differ between homes and businesses and between kinds of work, so we confirm it on the quote. To get one, call us on 07833 053749 or write to us at info@aircondoctor.co.uk.
Read more
What owners can safely do
For air conditioning, cleaning the indoor unit’s filters is the main job owners can do, if the manual says so. They come out, get a gentle clean and go back only when they’re dry. On a heat pump, the equivalent is keeping the outdoor unit clear and checking the controls.
Before you call us about a fault, a few checks can save a visit: check the mode, the set temperature, the remote’s batteries and the breaker. If a breaker trips again after you reset it, leave it off and give us a ring on 07833 053749 or fill in the contact form.
Common questions in Well Head
Is planning permission needed for a heat pump in Well Head?
There’s no single answer: the building and the outdoor unit position decide it. Central Well Head sits inside a conservation area. On a house, an air source heat pump can often go ahead under permitted development, with an outdoor unit of no more than 1.5 cubic metres and an installation that meets MCS 020(a), which includes a noise check. Those rights don’t reach the grounds of a listed building, and conservation areas rule out walls or roofs facing a road. If that might affect you, we ask the local planning authority (for Well Head, typically Dover council).
Do you cover smaller places like Well Head?
Yes. Well Head is within the area we cover across London and the South East. Visits to smaller places are planned so the engineer arrives with what the job needs.
How much time does a heat pump install need?
Expect it to take a few days on site, depending on the cylinder, the radiators and the pipework involved. The cylinder, the radiators and the pipework make the biggest difference and the timing is set out with your quote.
Which type of heat pump is right for my home?
Air-to-water feeds your central heating and hot water, while air-to-air warms and cools rooms directly. Air-to-air doesn’t heat hot water and the survey helps decide.
What’s the price of a heat pump installation?
For air-to-water, the price is £8,000–£16,000 (0% VAT on homes) before any grant. The Boiler Upgrade Scheme offers £7,500 to eligible homes in England and Wales, and we confirm eligibility before you commit.
Do you offer maintenance contracts?
Yes. Maintenance contracts are part of what we do, with visits at the interval your system and the manufacturer need. Every visit is recorded, with F-Gas records where refrigerant work is involved.
Will I get records for the system?
Yes, on every job. A new system comes with commissioning details, F-Gas records and the manufacturer’s warranty information, while repairs and services get a written note of what was found and done.
Pricing air source heat pumps in Well Head
The price is fixed before any work begins. It’s based on:
- Access, including height, roofs and ladders
- Whether it’s a simple split or a larger system
- Whether it’s a one-off job or part of a maintenance contract
Every job is different, so each one gets its own fixed-price quote. The equipment, how we reach it, the route between units and the work needed all make a difference.
What we need to know
Before you ask for a quote, gather:
- A photo of the consumer unit with the cover closed
- The postcode and whether it’s a home, flat or business
- The outside wall, roof or yard where the outdoor unit sits or would go
Our prices page gives typical ranges, but your quote is based on your job, because no two buildings, rooms or systems are the same. After a look at the job, by pictures or a survey, the price is fixed. To get going, call us on 07833 053749 or drop us a line.
Places near Well Head
More services for Well Head
After we’ve gone
Here’s the after-treatment advice, short and simple:
- Diary the next service
- Find out the grant position at the survey
- Leave space around the outdoor unit
After commissioning, the installation is registered under MCS and you receive the certificate. Keep it with the manufacturer’s paperwork for future reference.
Have the system serviced regularly. Check the manufacturer’s terms, as they may include servicing conditions.
A customer’s words
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead