Hampshire · Heat pump installation

Air Source Heat Pumps in Upper Chute

Air source heat pumps for Upper Chute, from F-Gas certified engineers, with the manufacturer’s warranty terms explained on your quote. We reply to enquiries the same working day.

  • Ageing boilers that will need replacing
  • Questions about the Boiler Upgrade Scheme
  • Deciding on the outdoor unit position

Need air source heat pumps in Upper Chute?

Homes in Upper Chute and heat pumps

About 43% of homes in Upper Chute and the neighbourhoods around it have been built since 2000, according to VOA council tax data, and about 60% of households live in detached or semi-detached houses, according to Census 2021 figures. Newer homes typically lose less heat, which tends to suit a heat pump well. Houses typically have space for an outdoor unit and a hot water cylinder.

Period properties close to Church of St Nicholas can suit a heat pump, though insulation and any heritage protection are checked first. Sizing comes from the heat each room loses on a cold day, not from the size of the old boiler.

Upper Chute is about 6 miles north-west of Andover, in Hampshire. Wherever you are in the SP11 postcode area, we can help with air source heat pumps. Across Hampshire, we cover 683 places, Upper Chute among them. We also work in Guildford, about 43 miles from Upper Chute.

If your postcode is in SP11, we can take the job on. Close to Upper Chute, our area also takes in Chute Forest (2 miles south-east), Tangley (2 miles east), Redenham (3 miles south), Faberstown (3 miles south) and Clanville (3 miles south-east). We also work in nearby towns such as Andover (6 miles south-east), Tidworth (5 miles south-west), Ludgershall (3 miles south-west) and Whitchurch (11 miles east).

Local landmarks in Upper Chute

Locally, jobs take us to houses, flats and workplaces close to Hatchet Inn, among other places. Nearby you will also find Andover War Memorial Hospital (5.8 miles south-east) and Ludgershall Castle (2.8 miles south-west).

Map of Upper Chute © OpenStreetMap contributors

Air source heat pumps in Upper Chute, done properly

Air source heat pumps collect heat from outdoor air and bring it inside, using electricity to drive the process. The technology is close to air conditioning, which is why we install both and the Energy Saving Trust notes that air-to-air heat pumps are sometimes referred to as air conditioning. The work covers air-to-air heat pumps, radiator systems and homes heated by oil, LPG or gas, and the jobs we see most are checking whether planning permission is needed and working out whether radiators need upsizing.

Older and listed homes in villages like Upper Chute need extra care, because permitted development doesn’t apply within the grounds of a listed building, so consent comes first.

AirCon Doctor is an F-Gas certified company and NICEIC approved for electrical work, MCS certified for heat pumps and a Checkatrade member. Our engineers hold the F-gas qualifications needed to work on refrigerant.

Where
Upper Chute (SP11)
Region
Hampshire
Typical price
£8,000–£16,000 (0% VAT on homes), before the grant
Certified
F-Gas certified company, NICEIC approved, MCS
Response
On the working day you ask
Quotes
Fixed-price quote after a site survey
Telephone
07833 053749
Last updated
30 October 2026

What the work involves, system by system

Air-to-air heat pumps

Since 2025, air-to-air heat pumps can also be permitted development in England, subject to the conditions. Cooling-only units are not included and need a check with the council.

The Boiler Upgrade Scheme

Not every home qualifies and we confirm it before anything is agreed.

Before you call an engineer

Write down what you notice: error codes, noises, drips, smells or a drop in performance. It makes our diagnosis quicker, and a photo or a short video of the display is even better.

Owners can handle the everyday basics: keep the outdoor unit clear of leaves, plants and clutter, check the settings and the remote, and follow the cleaning the manual describes. Opening up the units, the electrics and the refrigerant circuit are a job for us.

Aftercare tips

To keep the system working properly:

  • Know the servicing conditions in your warranty
  • Find out the grant position at the survey
  • Use the settings explained at handover

Handover includes the controls and how to get the best from a heat pump. Heat pumps tend to work best running steadily rather than in short bursts so we set the controls up with you.

Keep radiators and indoor units unobstructed, as the system relies on them giving out heat.

Upper Chute: your questions answered

Will a heat pump in Upper Chute need planning permission?

It comes down to the building and the spot chosen for the outdoor unit. The Upper Chute Conservation Area takes in the middle of Upper Chute. On a house, an air source heat pump can often go ahead under permitted development, with an outdoor unit of no more than 1.5 cubic metres and an installation that meets MCS 020(a), which includes a noise check. Those rights do not reach the grounds of a listed building, and conservation areas rule out walls or roofs facing a road. If that might affect you, we ask Test Valley council, which is usually the planning authority for Upper Chute.

Does the Boiler Upgrade Scheme cover homes in Upper Chute?

Yes, the scheme covers homes in England, including Upper Chute, if they qualify. The amount depends on the type of heat pump, and the survey confirms which applies. You do not apply yourself: the MCS certified installer does, which is us.

Do you survey before quoting?

Yes. Photos often do the job for simple work, while larger systems and faults that need testing are seen on site.

Why use an F-Gas certified company?

F-Gas certification shows a company is approved to work on equipment containing fluorinated gases, such as the refrigerant in air conditioning and heat pumps. In Great Britain, that certification is a legal requirement, not an optional extra, and we hold it.

How long does a heat pump installation take?

The work takes a few days on site, depending on the cylinder, the radiators and the pipework involved. We confirm the timing after the survey, so phone 07833 053749 or write to us at info@aircondoctor.co.uk to arrange one.

Can you set up regular servicing?

Yes. Send details of the systems and how they’re used and we will propose a schedule and quote for it. That can include the leak checks the F-gas rules require for larger systems.

Do you protect the property while you work?

Floors and furniture near the work are covered with dust sheets before we start, and the area is kept tidy throughout. Before we leave, we clear up and run through the work with you.

The process

Protection comes first: dust sheets over floors and furniture near the work, and we ask before moving anything. Then the electrics are made safe and the work begins. It takes from a couple of days to around a week, depending on the system and how much of the heating changes, and we tidy up before we leave. Photos of the room and the outside of the property help us plan a visit to Upper Chute.

  1. It starts with a conversation about the home, the existing heating and your plans.
  2. The survey measures heat loss room by room and looks at radiators, hot water and the best spot for the outdoor unit.
  3. We send a fixed-price quote that shows the equipment, the grant position and the VAT.
  4. The outdoor unit, the indoor equipment and the controls are installed and connected.
  5. Commissioning, MCS certification and a handover of the controls finish the job.

Before we arrive

  • Let us know where the consumer unit is
  • Let us know where we can park and unload
  • Have the make and model of any existing unit to hand

Ask for a quote

If you need air source heat pumps in Upper Chute, ring us on 07833 053749 or drop us a line. Let us know the type of property and what you need, plus some pictures if they’re to hand. We reply the same working day.

Ask for a quote

Read more

From one of our customers

“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”

Sarah M., East Grinstead

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead