Hampshire · Heat pump installation
Heat pump installation in Chute Forest, Hampshire
Air source heat pumps in Chute Forest from an F-Gas certified company, with the manufacturer’s warranty terms explained on your quote. We reply to enquiries the same working day.
- Ageing boilers that will need replacing
- Moving away from fossil-fuel heating
- Working out whether radiators need upsizing
How we handle air source heat pumps in Chute Forest
Hot water from an air-to-water system is stored in a cylinder. Homes with a combi boiler may not have a cylinder, so finding space for one is part of the survey. With air-to-air, hot water has to come from something else. If you are dealing with questions about where the outdoor unit can go and checking whether planning permission is needed, we can help.
If your home in or near Chute Forest is heated by oil, LPG or electric heaters with no mains gas, the Boiler Upgrade Scheme adds an extra £1,500 until March 2027 for an air source or ground source heat pump.
For a fault on a system that may still be under warranty, send us the make, model and installation date. We’ll explain how the manufacturer’s terms are likely to apply before any chargeable work goes ahead.
- Location
- Chute Forest (SP11)
- Wider area
- Hampshire
- Replies
- We reply the same working day
- Credentials
- NICEIC approved, F-Gas certified, MCS
- Typical price
- £8,000–£16,000 before the grant, 0% VAT on homes
- Price
- A fixed price before work begins
- Phone
- 07833 053749
- Updated
- 30 October 2026
Looking after your system
Looking after it is simple, and it helps at the next service:
- File the MCS certificate safely
- Diary the next service
- Read the manufacturer’s warranty terms for your brand
The warranty on the heat pump is the manufacturer’s, on its own terms. We explain the terms for your brand, including any servicing conditions.
A well-insulated home helps a heat pump, as lower heat loss means the system has less to do.
Air source heat pumps in Chute Forest: the local picture
Chute Forest is about 65 miles from central London, well within the area we cover from our base in East Grinstead. Valuation Office Agency council tax records show about 43% of homes in Chute Forest and the neighbourhoods around it were built in 2000 or later, and about 60% of households live in detached or semi-detached houses, according to the 2021 Census. Better insulated, newer homes are often a good match for a heat pump. Detached and semi-detached houses normally have room for the outdoor unit and a cylinder.
Every heat pump design starts with a room-by-room heat loss calculation. Period properties close to St Mary's Church can suit a heat pump, though insulation and any heritage protection are checked first.
Chute Forest is about 5 miles north-west of Andover, in Hampshire. From the centre of Chute Forest to the outskirts, we cover air source heat pumps, from small jobs to large ones. Across Hampshire, we cover 683 places, Chute Forest among them. For properties nearby, see our Guildford page (43 miles or so).
Work in SP11 follows the same survey, fixed-price quote and written records as everywhere else we cover. Other places close to Chute Forest include Tangley (1 mile north-east), Clanville (1 mile south-east), Upper Chute (2 miles north-west), Redenham (2 miles south) and Appleshaw (2 miles south). Within a short drive, we also cover Andover (5 miles south-east), Tidworth (5 miles west), Ludgershall (3 miles west) and Whitchurch (10 miles east).
Near you in Chute Forest
In Chute Forest, that means homes and buildings near Hatchet Inn. For rail, the closest station is Andover station, about 4.6 miles south-east of the centre. Other landmarks nearby include Andover War Memorial Hospital (4.3 miles south-east) and Ludgershall Castle (2.9 miles west). Green spaces nearby include Anton Lakes.
Before you call an engineer
Do not move, re-route or disconnect units or pipework yourself. Disconnecting a system means dealing with refrigerant, which only a qualified engineer can do, and the electrical side needs a competent person. Ask us to quote for a move instead.
For air conditioning, cleaning the indoor unit’s filters is the main job owners can do, if the manual says so. They come out, get a gentle clean and go back only when they’re dry. On a heat pump, the equivalent is keeping the outdoor unit clear and checking the controls.
Your questions about air source heat pumps in Chute Forest
Will you come out to Chute Forest?
Yes, smaller places are covered as well as towns. Send a few details and pictures, and we reply the same working day.
Can you do air source heat pumps in Chute Forest?
Yes. We work across London and the South East from our base in East Grinstead, and Chute Forest is part of that. Tell us a little about the job and we’ll take it from there.
Do you work on systems someone else installed?
Yes. We work on systems fitted by other installers as well as our own, on all the main brands. Tell us the make and model and send any paperwork you have.
Are you F-Gas certified?
We’re an F-Gas certified company, NICEIC approved for electrical work and MCS certified for heat pumps. We’re also Checkatrade members.
Do you work on all makes?
The main ones, including Mitsubishi Electric, Daikin, Fujitsu, Panasonic, Toshiba, LG, Samsung, Mitsubishi Heavy Industries and Hitachi. For new systems, we recommend a brand and model to suit the job and explain why.
Do you provide F-Gas records?
Yes. It’s your proof of what was done: a dated note of the work, with refrigerant details where they apply.
Can I get a grant for an air-to-air heat pump?
The air-to-air grant is £2,500, and only some homes qualify. The system has to replace the fossil-fuel heating and heat the whole home with an MCS certified installer.
System by system
Hot water cylinders
An older cylinder may not suit a heat pump, and we explain whether yours can stay.
Air-to-air heat pumps
An air-to-air system heats rooms directly and can also provide cooling. They don’t heat hot water, so that has to come from elsewhere.
Places near Chute Forest
More services for Chute Forest
How it works
If the system has to be off for part of the visit, we tell you before any work starts so it does not catch you out. For businesses, we can usually work room by room or zone by zone. On site, it takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes. Photos of the room and the outside of the property help us plan a visit to Chute Forest.
- First we find out about the property, the heating you have now and what you’re hoping for.
- On the visit we calculate what every room loses on a cold day, then check the radiators, room for a cylinder and outdoor unit options.
- The price comes back fixed and in writing, with the grant and VAT shown line by line.
- Installation covers the outdoor unit, the indoor connections and the controls.
- Once it’s running correctly, the MCS certificate is issued and we show you the settings.
Preparing for the visit
- Mention any parking restrictions near the property
- Clear the space around the indoor unit, or where it will go
- Mention any managing agent or landlord rules we need to follow
Getting a quote
The quickest way to a quote is to send photos: the room or the existing unit, the outside wall or roof where the outdoor unit sits or would go, and the label on any existing unit. Tell us the address and what you need, and simple jobs can often be priced without a visit.
Related advice
A customer’s words
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager