Kent · Heat pump installation
Heat pump installers in Stelling Minnis
One call covers MCS certified installation of air source heat pumps for heating and hot water, with the Boiler Upgrade Scheme grant applied for in Stelling Minnis, from the first look to sign-off. An F-Gas certified company, NICEIC approved, on Checkatrade.
- Working out where a cylinder could go
- Checking whether planning permission is needed
- Ageing boilers that will need replacing
Air source heat pumps in Stelling Minnis
In England, an air source heat pump on a house can often go in under permitted development rights. The conditions include an outdoor unit of no more than 1.5 m³ and compliance with MCS 020(a), and the unit can’t be used solely for cooling or sit within the curtilage of a listed building. We check the rules for your property as part of the survey. Typical jobs include questions about the Boiler Upgrade Scheme and moving away from fossil-fuel heating, across radiator systems, air-to-air heat pumps and hot water cylinders.
Homes around Stelling Minnis typically have room outside for a heat pump, so the design focuses on heat loss and radiators.
Think of the paperwork as the system’s health record: what was fitted or found, what was done and when. If anything goes wrong later, it helps the next engineer and the manufacturer and it’s worth keeping safe.
- Where
- Stelling Minnis (CT4)
- Wider area
- Kent
- Quote
- Fixed, in writing
- Price guide
- Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
- Response
- On the working day you ask
- Approvals
- NICEIC approved, F-Gas certified, MCS
- Telephone
- 07833 053749
- Page updated
- 30 October 2026
Common questions in Stelling Minnis
Do you cover smaller places like Stelling Minnis?
We do. Villages and hamlets get the same service as the bigger towns. Send a few details and pictures, and we reply the same working day.
Can I fit a heat pump in Stelling Minnis without planning permission?
There’s no single answer: the building and the outdoor unit position decide it. The half-mile around the middle of Stelling Minnis holds about 4 listed buildings and structures. Heat pumps on houses are often permitted development, but listed buildings need consent and conservation areas restrict outdoor units facing a road. Where it’s needed, we check with the local planning authority (for Stelling Minnis, typically Folkestone and Hythe council).
Can I get the Boiler Upgrade Scheme grant?
Eligibility depends on the property and the scheme rules. In England and Wales, the scheme offers £7,500 towards an eligible air-to-water or ground source heat pump, and £2,500 towards an air-to-air heat pump only in limited cases, and we check before you commit.
Which manufacturers do you install and repair?
Mitsubishi Electric, Daikin, Fujitsu, Panasonic, Toshiba, LG, Samsung, Mitsubishi Heavy Industries, Hitachi and others. For a new system, we suggest the make and model that suit the property and explain why.
How much time does a heat pump install need?
Expect it to take a few days for most air-to-water installations, with air-to-air systems often quicker. The cylinder, the radiators and the pipework make the biggest difference and the timing is set out with your quote.
Are my radiators big enough for a heat pump?
That depends on the room’s heat loss and the radiator’s size. We check them all during the survey, so the quote covers any changes.
Do you work for landlords and businesses?
Yes. We work for homeowners, landlords, letting and managing agents, and businesses of every size across London and the South East. Let us know who the records should go to.
What air conditioning will not do
It’s worth knowing the limits before booking:
- Draught-proofing and insulation upgrades
- Promising eligibility for the Boiler Upgrade Scheme
- Gas boiler work, such as disconnecting the old boiler, which needs a Gas Safe registered engineer
Not sure which it is? You can call us on 07833 053749, or email if that’s easier and we will tell you honestly.
What we work on in Stelling Minnis
- Underfloor heating
- Radiator systems
- Air-to-air heat pumps
- Homes heated by oil, LPG or gas
- Air-to-water heat pumps
- Hot water cylinders
How the visit works
On the day, we arrive at the time agreed with you and check the plan with you first. Dust sheets go down over floors and anything close to the work, and anything electrical is made safe before work starts. The work itself takes from a couple of days to around a week, depending on the system and how much of the heating changes. A note on how to find the property and where to park makes a visit to Stelling Minnis easier.
- We talk through your home, your current heating and what you want from a heat pump.
- A heat loss survey works out how much heat each room needs, and we look at the radiators, the cylinder space and where the outdoor unit could go.
- We send a fixed-price quote that shows the equipment, the grant position and the VAT.
- Fitting day: the outdoor unit is placed, the indoor side connected and the controls set up.
- Commissioning, MCS certification and a handover of the controls finish the job.
Before we arrive
- Unlock any gate, garage or side passage we need
- Mention any roof access, ladders or high-level work
- Tell us about any building rules, permits or sign-in
Getting a price
Need a price for air source heat pumps? Please phone 07833 053749 and tell us about the job. We will explain what we’d recommend and why, then send a fixed-price quote before you commit to anything.
Related advice
Towns and villages near Stelling Minnis
What else we do in Stelling Minnis
Keeping the system healthy
So the system stays in good health:
- Leave space around the outdoor unit
- File the MCS certificate safely
- Let the heat pump run steadily, as set up at handover
Once commissioned, we register the installation with MCS and give you the certificate. File it with the warranty documents for future reference.
Keep the outdoor unit clear of leaves, plants and stored items. It needs good airflow to collect heat from outside, so keep it clear all year.
Air source heat pumps in Stelling Minnis: the local picture
The 2021 Census found about 85% of households in detached or semi-detached houses. Finding room for the outdoor unit and a cylinder is seldom a problem in homes like these.
If your home is listed, like Acrise Place about 4.4 miles south-east, listed building consent comes before any heat pump work. Period properties close to Church of St Mary can suit a heat pump, though insulation and any heritage protection are checked first.
Stelling Minnis is about 6 miles south of Canterbury, in Kent. Properties in Stelling Minnis get the same service as everywhere we cover: a look at the job first, a fixed-price quote and written records at the end. Count every place we list in Kent and you reach 922, with Stelling Minnis on the list. We also work in Eastbourne, around 44 miles away.
Bossingham Road, Ponycart Lane and Minnis Lane and the roads off them are all inside our area. Jobs in CT4 are looked at, quoted and booked the same way as anywhere else. Places around Stelling Minnis that are also on our list: Bossingham (1 mile north-east), Waltham (2 miles west), Rhodes Minnis (3 miles south), Stowting Common (3 miles south-west) and Ottinge (3 miles south). Larger places within reach include Ashford (9 miles west), Canterbury (6 miles north), Dover (11 miles east) and Folkestone (8 miles south-east).
What’s near Stelling Minnis
Typical jobs here are in properties near Spong Wood. Well-known places in the area include Kent and Canterbury Hospital (5.6 miles north).
Why it’s worth doing now in Stelling Minnis
From 1 April 2027, VAT on heat pumps in homes rises from 0% to 5%. If you are thinking about a heat pump, that date is worth knowing alongside your own plans for the property. Planning ahead for a job in Stelling Minnis means we can bring everything needed.
Our prices page shows typical ranges, but each job is priced on what it involves. Call for a fixed-price quote, and we will explain what it covers.
Why book with us
- 24/7 emergency line for breakdowns
- Manufacturer’s warranty terms explained on your quote
- NICEIC approved for electrical work
- Covering London and the South East
Read our cost guide or our accreditations.
What a customer said
“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”
David W., Haywards Heath