Oxfordshire · Heat pump installation

Air Source Heat Pumps in Stanford in the Vale

Air source heat pumps across Stanford in the Vale and nearby, from the first look to the final check and a fixed price agreed before we start.

  • Ageing boilers that will need replacing
  • Choosing between air-to-water and air-to-air
  • Finding a place for the outdoor unit

Need air source heat pumps in Stanford in the Vale?

About our air source heat pumps in Stanford in the Vale

A heat pump takes heat from the outside air and moves it into your home, using electricity to drive the process. It works on the same principle as air conditioning, run the other way, and air-to-air heat pumps are sometimes simply called air conditioning. Typical jobs include an oil, LPG or gas boiler near the end of its life and checking eligibility for a heat pump grant, on air-to-water heat pumps, underfloor heating and homes heated by oil, LPG or gas.

Homes around Stanford in the Vale usually have space for an outdoor unit and a hot water cylinder, so the main questions are heat loss, radiators and the electrics.

Warranty periods vary by brand and by product. Daikin, for instance, gives a standard 2 years on split air conditioning, with longer extensions only on its air-to-water heat pumps. Whatever the brand, the manufacturer’s terms are explained on your quote.

Place
Stanford in the Vale (SN7)
Region
Oxfordshire
Quote
A fixed-price quote up front
Guide price
Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
Approvals
F-Gas certified, NICEIC approved, MCS
Telephone
07833 053749
Page updated
30 October 2026

Air source heat pumps around Stanford in the Vale

VOA council tax data show about 32% of homes in Stanford in the Vale and the neighbourhoods around it were built in 2000 or later. Better insulated, newer homes are often a good match for a heat pump.

Live in one of the older houses around Church of St Denys? Expect the survey to look closely at heat loss and at the building’s planning status. Longworth House lies about 4.7 miles north-east. Owners of listed homes need consent before a heat pump is fitted, so it’s one of our first questions.

Stanford in the Vale is about 5 miles north-west of Wantage, in Oxfordshire. From the centre of Stanford in the Vale to the outskirts, we cover air source heat pumps, from a single room to a whole building. Our Oxfordshire coverage runs to 443 places, and Stanford in the Vale is one of them. Our Guildford page covers places nearby (49 miles or so).

We cover every part of the SN7 postcode area for air source heat pumps and the roads nearby. High Street, Heigham Court and Fawkner Way and the roads off them are all inside our area. Nearby, we also cover air source heat pumps in Bow (1 mile east), Hatford (1 mile north), Shellingford (1 mile west), Baulking (2 miles south-west) and Buckland (3 miles north). Further out, we also cover Oxford (14 miles north-east), Didcot (12 miles east), Abingdon-on-Thames (10 miles east) and Witney (10 miles north).

What’s near Stanford in the Vale

Typical jobs here are in properties near The Horse & Jockey pub and The Old Church of St George and the streets around them. A little further out are Faringdon Castle (3 miles north-west) and Faringdon Museum (3.4 miles north-west). For a walk, there’s Dragon Hill.

Map of Stanford in the Vale © OpenStreetMap contributors

Let and managed properties

We work for landlords, letting agents and managing agents as well as homeowners and businesses. Let us know who will give us access and who the records should go to, and we will keep everyone informed.

Running several properties is easier with one contractor. We work across London and the South East, so a run of properties can go into one programme and kept to a regular schedule.

Common questions in Stanford in the Vale

Can I get the Boiler Upgrade Scheme grant in Stanford in the Vale?

Stanford in the Vale is in England, where the Boiler Upgrade Scheme runs. For an air-to-water heat pump the amount is £7,500; an air-to-air system can get £2,500 if it replaces the fossil-fuel heating outright, meets the home’s full heating demand and is not an add-on to a boiler. You do not apply yourself: the MCS certified installer does, which is us.

Can I fit a heat pump in Stanford in the Vale without planning permission?

There’s no single answer: the building and the outdoor unit position decide it. Central Stanford in the Vale is a short walk from the Stanford in the Vale Conservation Area. A heat pump on a house can be permitted development if it meets the conditions, including the MCS noise check, but not within the grounds of a listed building, and in a conservation area the outdoor unit cannot face a road. Where needed, we check with the planning department at Vale of White Horse council, usually the authority for Stanford in the Vale.

Whose job is it to check the system for leaks?

The F-gas rules share it between the equipment’s operator and the engineers who work on it. How often depends on the size of the refrigerant charge in tonnes of CO2 equivalent: at least every 12 months from 5 tCO2e, and every 6 months from 50 tCO2e.

What’s the price of a heat pump installation?

Expect £8,000–£16,000 for an air-to-water system, with 0% VAT on homes, before the grant is taken off. The heat pump size, radiator changes and the cylinder decide where in that range you are. Air-to-air is priced after a survey.

Will you work on another installer’s system?

Yes. We work on systems fitted by other installers as well as our own, on all the main brands. Tell us the make and model and send any paperwork you have.

Will skipping a service affect the warranty?

It depends on the manufacturer’s terms. Some manufacturers make regular servicing by a qualified engineer a condition of the warranty, so it’s worth checking. Either way, keep a record of every service.

Do you work on commercial properties?

Yes. We work for homeowners, landlords, letting and managing agents, and businesses of every size across London and the South East. Tell us who should receive the paperwork.

What air conditioning won’t do

It’s worth knowing the limits before booking:

  • Draught-proofing and insulation upgrades
  • Any gas work on the existing boiler
  • Grants for hybrid systems or replacements of low-carbon systems

If you are not sure, just phone us on 07833 053749 or send an email and we’ll give you a straight answer.

Parts of the system we cover

  • Air-to-water heat pumps
  • Underfloor heating
  • Radiator systems
  • Hot water cylinders
  • Air-to-air heat pumps
  • Homes heated by oil, LPG or gas

Different systems, different jobs

Air-to-water heat pumps

An air-to-water heat pump heats water for your radiators or underfloor heating and your hot water cylinder. It replaces the boiler as the main heat source and we install it to MCS standards.

Hot water cylinders

An older cylinder may not suit a heat pump and we tell you if it needs replacing.

How the visit works

Our engineers arrive at the time agreed with you and check the plan with you first. Floors and furniture near the work are covered with dust sheets, and the electrics are made safe before any panel comes off. The work itself takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes. Let us know how to reach the outside wall or outdoor unit at your property near Stanford in the Vale.

  1. It starts with a conversation about the home, the existing heating and your plans.
  2. On the visit we calculate what every room loses on a cold day, then check the radiators, room for a cylinder and outdoor unit options.
  3. You get a fixed-price quote, with any grant you are eligible for and the VAT explained.
  4. The outdoor unit, the indoor equipment and the controls are installed and connected.
  5. The system is commissioned and registered under MCS, and we show you how to use it.

Preparing for the visit

  • Make sure we can reach the consumer unit or fuse board
  • Clear the space around the indoor unit, or where it will go
  • Let us know if the units are on a roof, a high wall or in a locked area

Get a fixed-price quote

Want a quote for air source heat pumps? Please phone 07833 053749 and tell us about the job. We will explain what we’d recommend and why, then send a fixed-price quote before anything is booked.

Get a quick quote

Related advice

What a customer said

“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”

David W., Haywards Heath

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead