West Berkshire · Heat pump installation
Heat pump installers in Riseley
Air source heat pumps for Riseley, from F-Gas certified engineers, with warranty terms explained brand by brand. We reply to enquiries the same working day.
- Replacing a combi boiler with a heat pump
- Plans to switch to electric heating with a heat pump
- Ageing boilers that will need replacing
About our air source heat pumps in Riseley
In England, an air source heat pump on a house can often go in under permitted development rights. The conditions include an outdoor unit of no more than 1.5 m³ and compliance with MCS 020(a), and the unit cannot be used solely for cooling or sit within the curtilage of a listed building. We look at the planning position for your home during the survey. If the problem is an oil, LPG or gas boiler near the end of its life and wanting to stop using oil, LPG or gas for heating, we can sort it out.
In a place like Riseley, some homes are listed, because permitted development doesn’t apply within the grounds of a listed building, so we check consent first.
Whatever the visit, you get a written record: commissioning details and F-Gas records for a new system, a note of the fault and the fix for a repair, or a service record. Keep it with the system’s paperwork so it’s to hand next time.
- Location
- Riseley (RG7)
- Region
- West Berkshire
- Certified
- F-Gas certified company, NICEIC approved, MCS
- Price guide
- Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
- Quote
- A fixed price before we start
- Phone
- 07833 053749
- Last updated
- 30 October 2026
Heat pumps in Riseley: local notes
About 53% of homes in Riseley and the neighbourhoods around it have been built since 2000, according to Valuation Office Agency council tax records, and Census 2021 figures found about 70% of households in detached or semi-detached houses. Newer homes usually lose less heat, which tends to suit a heat pump well. Houses normally have space for an outdoor unit and a hot water cylinder.
Period properties close to Church of All Saints can suit a heat pump, though insulation and any heritage protection are checked first.
Riseley is about 6 miles west of Yateley, in West Berkshire. Riseley gets the same approach as every job we take on: a look at the job first, a fixed-price quote and written records at the end. Riseley is one of 155 towns, villages and districts in West Berkshire we cover. The nearest of our city pages is Guildford, around 19 miles from Riseley.
Our nearest recent job to Riseley was on Princess Way, Camberley (GU15), about 10 miles east: installing a Samsung VRF system serving twelve rooms across two floors, including open-plan working areas, individual offices, a server room and a boardroom.
From Chapel Lane, Norton Road and Odiham Road to the smaller roads in between, nowhere is left out. Our working area takes in RG7. Nearby, we also cover air source heat pumps in Swallowfield (1 mile north), Heckfield Heath (1 mile south), Heckfield (1 mile south), Beech Hill (2 miles north-west) and Bramshill (2 miles south-east). We also work in nearby towns such as Thatcham (13 miles west), Burghfield Common (5 miles north-west), Calcot (7 miles north-west) and Shaw (15 miles west).
Landmarks near Riseley
Typical jobs here are in properties near The Bull at Riseley pub and Wellington Country Park and the streets around them. For rail, the closest station is Mortimer station, about 3.2 miles west. A little further out are Beaumys Castle (1.2 miles north-west). Open spaces near Riseley include The Marshes Local Nature Reserve and Longwater.
Owner checks or an engineer?
Never try to top up, release or handle refrigerant yourself. The law requires anyone working on equipment containing F gas to hold the right qualifications, and the company to be certified, and escaping refrigerant can cause cold burns. If you suspect a leak, switch the system off and call us.
Owner care supports servicing; it does not replace it. Clean filters and a clear outdoor unit help the system run as it should, but the refrigerant circuit, the electrics and the parts you cannot see still need an engineer at the interval the manufacturer recommends.
Common problems we fix in Riseley
Some people want to move away from burning fossil fuels at home. With a heat pump, the heat comes from the air outside and the system runs on electricity, which is why it fits that aim.
Reasons to give us a call include:
- Questions about the Boiler Upgrade Scheme
- Questions about listed buildings or conservation areas
- Finding a place for the outdoor unit
Historic houses such as Stratfield Saye House, about 1.7 miles south-west, are a reminder that listed homes need consent before a heat pump goes in.
Comparing quotes
- Whose warranty applies, and on what terms
- If the figure could change on the day
- Whether they looked at the job before pricing it
Riseley questions
Do I need planning permission for a heat pump in Riseley?
There’s no single answer: the building and the outdoor unit position decide it. A conservation area takes in the middle of Riseley. Heat pumps on houses are often permitted development, but listed buildings need consent and conservation areas restrict outdoor units facing a road. Where it’s needed, we check with the local planning authority (for Riseley, usually Wokingham council).
Is Riseley within the area you cover?
Yes, and the size of the place makes no difference to how we work. Visits to smaller places are planned so the engineer arrives with what the job needs.
How much does an air source heat pump cost?
Air-to-water systems are £8,000–£16,000 (0% VAT on homes), before any grant. Your price depends on the survey, the emitters and the hot water, and you get a fixed-price quote.
Can you come out in an emergency?
Yes, any time. If something urgent happens, like water coming from a unit or a critical room overheating, call our 24/7 line and we will agree what happens next.
Do I get paperwork after the visit?
Yes, always. A new system comes with commissioning details, F-Gas records and the manufacturer’s warranty information, and repairs and services get a record of the work.
Do I need new radiators for a heat pump?
Some radiators may be fine as they are, and some may need to be larger. Heat pumps run at lower flow temperatures, so radiators give out less heat so we check every radiator against the room’s heat loss.
Can I do any of the installation myself?
The refrigerant side has to be done by a qualified engineer working for an F-Gas certified company. That is a legal requirement, and manufacturers expect it for their warranty too. We can quote for the whole job, from supply to commissioning.
More services for Riseley
Keeping the system healthy
Simple habits make a real difference. Our advice:
- Leave space around the outdoor unit
- Avoid switching the heat pump on and off often
- Keep up with insulation and draught-proofing
Handover includes the controls and how to get the best from a heat pump. Heat pumps tend to work best running steadily rather than in short bursts, and we will explain the settings for your home.
Keep radiators and indoor units unobstructed so the heat can get into the room.
What happens on the day
Everything the job needs comes with us, from tools and test equipment to ladders and dust sheets. You only need to give us clear access to the units, or their planned positions, and to the fuse board. On site, the work takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes. A note on how to find the property and where to park makes a visit to Riseley easier.
- We talk through your home, your current heating and what you want from a heat pump.
- The survey measures heat loss room by room and looks at radiators, hot water and the best spot for the outdoor unit.
- A fixed-price quote follows, setting out the system, any grant that applies and the VAT.
- Fitting day: the outdoor unit is placed, the indoor side connected and the controls set up.
- Commissioning, MCS certification and a handover of the controls finish the job.
Before we arrive
- Tell us about parking and loading
- Let us know if the units are on a roof, a high wall or in a locked area
- Arrange for someone to be there to let us in
Getting a price
Getting a quote is straightforward. Send a few details and pictures, and we reply the same working day. If we need to see the property first, we book a survey at a time that works for you.
Advice
From one of our customers
“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”
David W., Haywards Heath