Hampshire · Heat pump installation

Bramshill air source heat pumps

Heat pump installation, for Bramshill and the surrounding area. Call for a fixed-price quote; we reply the same working day.

  • Wanting to stop using oil, LPG or gas for heating
  • Questions about where the outdoor unit can go
  • A boiler that’s getting old

Air source heat pumps across Bramshill

Common questions in Bramshill

Is Bramshill within the area you cover?

Yes. Bramshill is within the area we cover across London and the South East. A few pictures and the postcode are enough to get things started.

Is the heat pump grant available in Bramshill?

Yes, the scheme covers homes in England, including Bramshill, if they qualify. The grant is £7,500 for an air source (air-to-water) heat pump and £2,500 for an air-to-air system that replaces the existing fossil-fuel heating. The installer applies, and we are MCS certified.

Can I fit air conditioning or a heat pump myself?

No, not the refrigerant side. Under the F-gas rules, it must be done by qualified engineers from a certified company, and a new electrical circuit is notifiable building work unless a registered competent person does it.

What’s the price of a heat pump installation?

An air-to-water heat pump costs £8,000–£16,000 (0% VAT on homes) before the grant. Eligible homes in England and Wales can get £7,500 through the Boiler Upgrade Scheme though not every home qualifies.

What does F-Gas certified mean?

The law says any company working on equipment containing F gas has to be certified, and the engineers need their own qualifications. It’s how you know the refrigerant is being handled legally and safely.

How soon will you get back to me?

We reply to enquiries the same working day. If it’s an emergency, ring the 24/7 line instead.

Do I need to service the system to keep the warranty?

For some brands, yes. Read the manufacturer’s terms, or send us the make and model and we’ll explain them, and book the service at the interval they recommend.

About our air source heat pumps in Bramshill

We install air source heat pumps in Bramshill and across Hampshire, and we’re MCS certified. Air-to-water systems feed your radiators or underfloor heating and hot water cylinder, while air-to-air systems heat rooms directly through indoor units and can cool them too. We’ll explain which type fits your home and why. The work covers air-to-air heat pumps, homes heated by oil, LPG or gas and air-to-water heat pumps, and people most often call us about questions about the Boiler Upgrade Scheme and finding a place for the outdoor unit.

In a place like Bramshill, some homes are listed, and permitted development doesn’t cover listed buildings, so we check consent first.

Think of the paperwork as the system’s health record: a dated account of the work and the readings we took. If anything goes wrong later, it helps the next engineer and the manufacturer, so keep it safe.

Location
Bramshill (RG27)
Wider area
Hampshire
Replies
Answered the same working day
Typical price
Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
Credentials
NICEIC approved, F-Gas certified, MCS
Pricing
A fixed-price quote up front
Call
07833 053749
Checked
30 October 2026

For landlords and property managers

Where a tenant occupies the property but the landlord owns the system, the lease or tenancy agreement normally sets out who maintains what. We’re happy to deal with either side, and the paperwork can go to both.

For anyone managing more than one building, we can plan visits across the portfolio and price them together. Each property gets its own records, so each one has its own history.

What the work involves, system by system

Air-to-water heat pumps

An air-to-water heat pump costs £8,000–£16,000 (0% VAT on homes), before the grant. A £7,500 grant may be available through the Boiler Upgrade Scheme for eligible homes and the installer applies.

Outdoor unit position and planning

Under permitted development, the outdoor unit must be 1.5 m³ or less and must meet MCS 020(a) and not be used solely for cooling. It cannot be within the curtilage of a listed building.

When to call us in Bramshill

Many enquiries start with a question about the Boiler Upgrade Scheme. Whether you can get the grant depends on your home and the scheme conditions and we confirm it before you go ahead.

These are the situations we see most often:

  • Deciding which kind of heat pump suits the home
  • Checking eligibility for a heat pump grant
  • Working out where a cylinder could go

With Stratfield Saye House about 2.8 miles west, it’s worth asking whether your own home is listed before planning a heat pump.

What to look for in a quote

  • Proof of F-Gas company certification
  • What’s in the price and what is not
  • How extra work would be agreed if they find something unexpected

How to choose an air conditioning engineer

Air source heat pumps around Bramshill

Bramshill’s centre falls inside a designated conservation area. Listed buildings are part of the picture here: about 7 within half a mile of the centre, such as Moor Place Farm House (grade II*). For a heat pump, permitted development doesn’t apply within the grounds of a listed building, and in a conservation area the outdoor unit can’t go on a wall or roof facing a road, so we check with the local planning authority (typically Hart council) where needed. About 68% of households live in detached or semi-detached houses, according to Census 2021 figures. Detached and semi-detached houses normally have room for the outdoor unit and a cylinder.

Live in one of the older houses around Mission Church? Expect the survey to look closely at heat loss and at the building’s planning status.

Bramshill is about 4 miles west of Yateley, in Hampshire. Bramshill gets the same approach as every job we take on: a look at the job first, a fixed-price quote and written records at the end. We cover 683 places across Hampshire. Guildford, roughly 17 miles off, has its own page on this site.

Not far from Bramshill, a recent job of ours was on Princess Way, Camberley (GU15), about 9 miles east: installing a Samsung VRF system serving twelve rooms across two floors, including open-plan working areas, individual offices, a server room and a boardroom.

Our engineers cover all of RG27 and the streets around it. We also cover Hazeley (1 mile south), Heckfield Heath (1 mile west), Heckfield (1 mile west), Hound Green (2 miles south-west) and Riseley (2 miles north-west). We also work in nearby towns such as Basingstoke (9 miles south-west), Farnborough (8 miles south-east), Fleet (6 miles south-east) and Aldershot (10 miles south-east).

Landmarks near Bramshill

We fit and service air conditioning in homes and premises around Wellington Country Park. Bramshill’s nearest station is Winchfield station, roughly 4.3 miles south. A little further out are Fleet Community Hospital (5.3 miles south-east) and Beaumys Castle (3.1 miles north-west). Not far away are Horseshoe Lake and The Marshes Local Nature Reserve.

Map of Bramshill © OpenStreetMap contributors

The process

The first job on site is protection: sheets over the floor and any furniture nearby, and we ask before moving anything. After that, anything electrical is made safe and we start. The work on site takes from a couple of days to around a week, depending on the system and how much of the heating changes, and we tidy up before we leave. Somewhere like Bramshill, it helps to know about lanes, gates and where to park.

  1. It begins with your house and the heating it relies on now.
  2. We measure heat loss for every room.
  3. The design covers the heat pump, emitters, hot water and outdoor unit.
  4. You get a fixed price, with any grant and the VAT set out.
  5. We install, commission and register the system under MCS.

How to prepare

  • Give us access to the outside wall, roof or yard where the outdoor unit sits
  • Name a contact who can meet us at the agreed time
  • Find the manual or the paperwork for the system, if you have it

Getting a quote

The quickest way to a quote is to send photos: the room or the existing unit, the outside wall or roof where the outdoor unit sits or would go, and the label on any existing unit. Tell us the address and what you need, and simple jobs can often be priced without a visit.

Get a price

Advice

What a customer said

“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”

David W., Haywards Heath

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead