Kent · Heat pump installation
Heat pump installers in Northdown
For heat pump installation in Northdown, choose an F-Gas certified, NICEIC approved company. A fixed price before any work starts, and a 24/7 emergency line.
- Deciding on the outdoor unit position
- Replacing a combi boiler with a heat pump
- Comparing heat pump types
Air source heat pumps in Northdown
In England, an air source heat pump on a house can often go in under permitted development rights. The conditions include an outdoor unit of no more than 1.5 m³ and compliance with MCS 020(a), and the unit cannot be used solely for cooling or sit within the curtilage of a listed building. We check the rules for your property as part of the survey. The work covers air-to-water heat pumps, homes heated by oil, LPG or gas and radiator systems, and people most often call us about no space for a hot water cylinder and checking whether planning permission is needed.
Cottages and older homes near Northdown can lose heat faster, so a proper heat loss calculation matters. Sometimes insulating first makes more sense.
We’re an F-Gas certified company, NICEIC approved for electrical work, with MCS certification for heat pumps and Checkatrade membership. Our engineers hold the F-gas qualifications needed to work on refrigerant.
- Where
- Northdown (CT9, CT10)
- Region
- Kent
- Certified
- NICEIC and F-Gas, MCS
- Prices
- Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
- Price
- A fixed price before any work starts
- Enquiries
- On the working day you ask
- Phone
- 07833 053749
- Checked
- 30 October 2026
Heat pumps in Northdown: local notes
Northdown lies within about 1 mile of the sea. For a heat pump near the sea, ask about any coastal protection option the manufacturer offers. Census 2021 figures found about 66% of households in detached or semi-detached houses. Finding room for the outdoor unit and a cylinder is seldom a problem in homes like these.
Period properties close to St Philip can suit a heat pump, though insulation and any heritage protection are checked first. Quex Park lies about 4.5 miles west. Owners of listed homes need consent before a heat pump is fitted, so it’s one of our first questions.
Northdown is about 2 miles east of Margate, in Kent. Across the CT9 area, our engineers can take on air source heat pumps. Our list for Kent has 922 entries and Northdown is among them. Bromley, roughly 61 miles off, has its own page on this site.
Postcode districts we cover here: CT9 and CT10. Our engineers work on Old Road, Holly Lane and Green Lane and the roads around them. Places around Northdown that are also on our list: Palm Bay (1 mile north-west), Cliftonville (1 mile west), Kingsgate (1 mile east), St Peter's (1 mile south) and Broadstairs (2 miles south). We also work in nearby towns such as Ramsgate (3 miles south), Deal (12 miles south), Herne Bay (12 miles west) and Walmer (13 miles south).
Near you in Northdown
Typical jobs here are in properties near Captain Digby Inn and Dane Court Grammar School and the streets around them. The nearest railway station is Broadstairs station, roughly 1.8 miles south. A little further out are Westwood Cross (2.1 miles south-west) and Queen Elizabeth the Queen Mother Hospital (1.4 miles south-west).
Towns and villages near Northdown
More services for Northdown
Northdown: your questions answered
Can I fit a heat pump in Northdown without planning permission?
It comes down to the building and the spot chosen for the outdoor unit. There’s a conservation area, the Northdown Conservation Area, close to central Northdown. A heat pump on a house can be permitted development if it meets the conditions, including the MCS noise check, but not within the grounds of a listed building, and in a conservation area the outdoor unit cannot face a road. Where necessary, we check with Thanet council, which is typically the planning authority for Northdown.
Is the heat pump grant available in Northdown?
Northdown is in England, where the Boiler Upgrade Scheme runs. For an air-to-water heat pump the amount is £7,500; an air-to-air system can get £2,500 if it replaces the fossil-fuel heating outright, meets the home’s full heating demand and isn’t an add-on to a boiler. As an MCS certified installer, we apply for it on your behalf.
How much time does a heat pump install need?
An installation takes several days for an air-to-water system with a new cylinder, less for an air-to-air system. We confirm the timing after the survey, so phone us on 07833 053749 to arrange one.
What accreditations do you have?
AirCon Doctor is an F-Gas certified company, with NICEIC approval for electrical work and MCS certification for heat pumps. We’re also Checkatrade members.
Can I do any of the installation myself?
Anything that involves the refrigerant needs an F-Gas qualified engineer from a certified company. That’s the law, not just our preference, and manufacturers expect it for their warranty too. We are happy to quote for the full job, supply to commissioning.
Will I get records for the system?
Yes. Every visit is written up, and any work on the refrigerant circuit goes in the F-Gas records. Keep them with the manual and the warranty documents.
Will you work on another installer’s system?
Yes. We work on systems fitted by other installers as well as our own, on all the main brands. Tell us the make and model and send any paperwork you have.
System by system
Radiators and underfloor heating
Underfloor heating works well with heat pumps because it uses lower temperatures, and we can connect to it where it’s already in.
Air-to-water heat pumps
Air-to-water systems work at lower temperatures than boilers, which is why radiator sizing is part of the survey.
How the visit works
Everything the job needs comes with us, from tools and test equipment to ladders and dust sheets. All we ask is clear access to the units, or to where they’ll go, and to the consumer unit. The visit takes a few days on site, depending on the cylinder, the radiators and the pipework involved. Around Northdown, access is normally simple, though gates and garden access are worth mentioning.
- Step one is understanding the house, how it’s heated today and what you’d like to change.
- The survey measures heat loss room by room and looks at radiators, hot water and the best spot for the outdoor unit.
- We send a fixed-price quote that shows the equipment, the grant position and the VAT.
- The outdoor unit, the indoor equipment and the controls are installed and connected.
- Commissioning, MCS certification and a handover of the controls finish the job.
How to prepare
- Keep pets and children away from the work area
- Unlock any gate, garage or side passage we need
- Tell us about access, such as roof hatches, high walls or locked plant areas
Getting a quote
If you need air source heat pumps in Northdown, phone 07833 053749 or drop us a line. Tell us what kind of property it is and what you’d like done, and send a few pictures if you can. We reply the same working day.
Read more
What air source heat pumps cannot fix
An honest diagnosis matters more to us than a booking, so here’s what this work can’t put right:
- Tax advice on your own circumstances
- Improving the building’s insulation
- Getting planning permission or listed building consent on your behalf
Not sure which it is? You can phone us on 07833 053749 or fill in the contact form and we’ll tell you honestly before booking.
What we work on in Northdown
- Radiator systems
- Hot water cylinders
- Underfloor heating
- Air-to-air heat pumps
- Air-to-water heat pumps
- Homes heated by oil, LPG or gas
How we price air source heat pumps
Before we fix a price, we need to know a few things. We look at:
- One-off work versus a regular service cycle
- The equipment or parts the job needs
- The pipe route between the units
The cost depends on the type of system and how many units are involved, the access and what the work involves. We give you a fixed price before we start, so you know where you stand.
What we need to know
Photos and a few facts are often enough to price a simple job. Send what you can of the following:
- A short video of any fault, such as a noise or a flashing light
- A close-up of the unit’s label showing the model number
- The outside wall, roof or yard where the outdoor unit sits or would go
To help us quote: the address and the type of property, a few pictures, the brand and model of anything already fitted and anything you’ve noticed, such as an error code or a noise. Then phone 07833 053749 or use the quote form.
What a customer said
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead