Kent · Heat pump installation
Heat pump installers in Kingsgate
For MCS certified installation of air source heat pumps for heating and hot water, with the Boiler Upgrade Scheme grant applied for in Kingsgate, choose an F-Gas certified, NICEIC approved company. A fixed price before we start, and a 24/7 emergency line.
- Replacing a combi boiler with a heat pump
- Deciding which kind of heat pump suits the home
- Radiators that may be too small for a heat pump
What air source heat pumps cannot fix
A few issues sit outside what this work can do:
- Improving the building’s insulation
- Tax rulings, which only HMRC can give
- Promising eligibility for the Boiler Upgrade Scheme
If you are not sure, just call us on 07833 053749 or fill in the contact form and we’ll give you a straight answer before booking.
Where we work
- Homes heated by oil, LPG or gas
- Hot water cylinders
- Air-to-air heat pumps
- Air-to-water heat pumps
- Radiator systems
- Underfloor heating
About our air source heat pumps in Kingsgate
In England, an air source heat pump on a house can often go in under permitted development rights. Conditions include a maximum outdoor unit size of 1.5 m³, compliance with MCS 020(a), use for more than cooling alone and a site outside the curtilage of a listed building. We look at the planning position for your home during the survey. If you are dealing with planning and permitted development questions and an oil, LPG or gas boiler near the end of its life, we can help.
In a place like Kingsgate, some homes are listed, because permitted development doesn’t apply within the grounds of a listed building, so consent comes first.
Warranty on the equipment is the manufacturer’s own, on the manufacturer’s terms, and we set them out on your quote. Terms differ from brand to brand, so we go through them with you rather than leave you to find the small print.
- Where
- Kingsgate (CT10)
- Wider area
- Kent
- Pricing
- A fixed-price quote up front
- Prices
- £8,000–£16,000 before the grant, 0% VAT on homes
- Certified
- NICEIC approved, F-Gas certified, MCS
- Response
- Same working day
- Call
- 07833 053749
- Updated
- 30 October 2026
What we do, step by step
You don’t need to do much on the day. Just let us in and point us to the units, or to where they’ll be fitted, and we take it from there. At the end, we tidy up and run through the work with you. Photos of the existing unit help with repairs and servicing in Kingsgate.
- We find out about your home and the heating you have now.
- We measure heat loss for every room.
- We design the system, check the radiators and cylinder and look at the outdoor unit position.
- You get a fixed price, with any grant and the VAT set out.
- Then it’s fitted, commissioned and registered with MCS.
How to prepare
- Mention any roof access, ladders or high-level work
- Unlock any gate, garage or side passage we need
- Name a contact who can meet us at the agreed time
Ask for a quote
Getting a quote is straightforward. Send a few details and photos, and we reply the same working day. If we need to see the property first, we book a survey at a time that works for you.
Advice
Heat pumps in Kingsgate: local notes
Kingsgate is within about 1 mile of the coast. Coastal sites are worth mentioning at the survey, as salt air affects the outdoor unit and its fixings. The last census (2021) found about 73% of households in detached or semi-detached houses. Detached and semi-detached houses typically have room for the outdoor unit and a cylinder.
Period properties close to St Philip can suit a heat pump, though insulation and any heritage protection are checked first. Sizing comes from the heat each room loses on a cold day, not from the size of the old boiler.
Kingsgate is about 2 miles north of Broadstairs, in Kent. We cover Kingsgate for air source heat pumps and across the rest of Kent. 922 places in Kent are on our list. We also work in Bromley, about 62 miles from Kingsgate.
Work in CT10 follows the same survey, fixed-price quote and written records as everywhere else we cover. Joss Gap Road, Kingsgate Bay Road and Holland Close and the roads off them are all inside our area. Close by, we work in Northdown (1 mile west), Palm Bay (1 mile north-west), Broadstairs (2 miles south), St Peter's (2 miles south-west) and Cliftonville (2 miles west). Larger places within reach include Margate (3 miles west), Ramsgate (3 miles south-west), Deal (12 miles south) and Herne Bay (13 miles west).
Local landmarks in Kingsgate
We fit and service air conditioning in homes and premises around Captain Digby Inn and The Charles Dickens School. Kingsgate’s nearest station is Broadstairs station, roughly 1.6 miles south of the centre. A little further out are Westwood Cross (2.6 miles south-west) and Queen Elizabeth the Queen Mother Hospital (2.3 miles west).
Looking after your system
After the visit, a few habits help:
- Use the settings explained at handover
- File the MCS certificate safely
- Find out the grant position at the survey
The warranty on the heat pump is the manufacturer’s, on its own terms. We go through the conditions with you, including any servicing they ask for.
A well-insulated home helps a heat pump because it reduces the heat the system needs to supply.
Pricing air source heat pumps in Kingsgate
Some jobs are bigger than they look, and some smaller. The main factors:
- The pipe route between the units
- Which make and model is being fitted or worked on
- One-off work versus a regular service cycle
The cost depends on the type of system and how many units are involved, how easy the units are to reach and what the work involves. You get a fixed price before any work starts, so you know where you stand.
Asking for a quote
When you call or email, it’s useful to have:
- The remote or wall controller showing any error
- A close-up of the unit’s label showing the model number
- The outdoor side of the property, including any roof or flat area
Published ranges are a starting point; the quote is built on your property, because every property is different. Once we’ve looked at the job, from pictures or on a survey, you get a fixed price. To start, phone us on 07833 053749 or send an email.
Places near Kingsgate
What else we do in Kingsgate
FAQs for Kingsgate
Is a heat pump in Kingsgate permitted development?
It depends on the property. The Kingsgate Conservation Area takes in the middle of Kingsgate. The permitted development rules for heat pumps leave out listed buildings and stop outdoor units going on road-facing walls or roofs in conservation areas. Anything outside the rules needs an application, and we raise it with the local planning authority (for Kingsgate, usually Thanet council) first.
Is the heat pump grant available in Kingsgate?
Kingsgate is covered, as the scheme runs across England and Wales. Air-to-water and ground source systems attract £7,500. Air-to-air gets £2,500, but only where it takes over from fossil-fuel heating and covers the whole home’s heating demand. The installer applies, and we are MCS certified.
Do you work on commercial properties?
Yes. From a single let flat to offices, shops and public buildings, we work the same way: survey or diagnosis, a fixed price and proper paperwork.
Why use an F-Gas certified company?
For refrigerant work, both the engineer and the company need the right F-gas credentials. It’s worth checking before booking, and we are happy to show ours.
Can you set up regular servicing?
Yes. Tell us what you have and how it’s used and we’ll propose a schedule and quote for it. That can include the leak checks the F-gas rules require for larger systems.
What’s the difference between air-to-water and air-to-air heat pumps?
Air-to-water feeds your central heating and hot water, while air-to-air warms and cools rooms directly. With air-to-air, hot water needs another source and the survey helps decide.
Do I get paperwork after the visit?
Yes, always. A new system comes with commissioning details, F-Gas records and the manufacturer’s warranty information, and repairs and services get a record of the work.
From one of our customers
“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”
David W., Haywards Heath