Kent · Heat pump installation
Air Source Heat Pumps in Nettlestead
Our engineers work in Nettlestead on MCS certified installation of air source heat pumps for heating and hot water, with the Boiler Upgrade Scheme grant applied for. Diagnosis first, a fixed price and proper paperwork when we finish.
- Not knowing whether a grant applies
- Deciding which kind of heat pump suits the home
- Plans to switch to electric heating with a heat pump
Air source heat pumps for homes and businesses in Nettlestead
Air-to-water heat pumps heat your hot water through a cylinder. If you have a combi boiler and no cylinder, the survey looks at where one could go. Air-to-air systems do not heat hot water, so you will need another way to do that. The work covers radiator systems, underfloor heating and air-to-air heat pumps, and the jobs we see most are comparing heat pump types and plans to switch to electric heating with a heat pump.
Homes around Nettlestead normally have room outside for a heat pump, so the design focuses on heat loss and radiators.
Nothing is signed off by word of mouth: commissioning details for an installation, a fault and repair note for a repair, or a record of the service. Keep it with the system’s paperwork so it’s to hand next time.
- Place
- Nettlestead (ME18)
- Wider area
- Kent
- Pricing
- Fixed-price quote after a site survey
- Response
- Answered the same working day
- Credentials
- NICEIC approved, F-Gas certified, MCS
- Price guide
- Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
- Call
- 07833 053749
- Checked
- 30 October 2026
Landlords, agents and facilities managers
When the building owner and the occupier are different, it’s worth checking the agreement for who looks after the system. We are happy to deal with either side, and the paperwork can go to both.
From a single flat to a whole estate, you get the same standard: diagnosis, a fixed price, access agreed with the people on site and paperwork at the end.
Nettlestead: your questions answered
Will a heat pump in Nettlestead need planning permission?
There’s no single answer: the building and the outdoor unit position decide it. There’s a conservation area, the Wateringbury Conservation Area, close to central Nettlestead. Heat pumps on houses are often permitted development, but listed buildings need consent and conservation areas restrict outdoor units facing a road. Where it’s needed, we check with Maidstone council, which is typically the planning authority for Nettlestead.
Is Nettlestead within the area you cover?
We do. Villages and hamlets get the same service as the bigger towns. We’re based in East Grinstead and plan each visit so the job can be finished in one trip where possible.
Will skipping a service affect the warranty?
Each manufacturer decides. Where servicing is a condition, a missed service could give the manufacturer grounds to refuse a claim and we’ll tell you what your brand asks for.
Why does F-Gas certification matter?
F-Gas certification shows a company is approved to work on equipment containing fluorinated gases, such as the refrigerant in air conditioning and heat pumps. In Great Britain, that certification is a legal requirement, not an optional extra, and we hold it.
What’s the price of a heat pump installation?
Air-to-water work is in the £8,000–£16,000 range (0% VAT on homes), with any grant still to come off. The heat pump size, radiator changes and the cylinder decide where in that range you are, and air-to-air systems are priced after a survey.
Are my radiators big enough for a heat pump?
It varies from room to room. The survey compares each radiator with the room’s needs, so the quote covers any changes.
Do I get paperwork after the visit?
Yes. You get a written record of each visit, and any work on the refrigerant circuit goes in the F-Gas records. File them with the system’s paperwork.
Air source heat pumps in Nettlestead: the local picture
The last census (2021) found about 71% of households in detached or semi-detached houses. Finding room for the outdoor unit and a cylinder is seldom a problem in homes like these.
If your home is listed, like Old Soar Manor about 4.3 miles west, listed building consent comes before any heat pump work. Period properties close to St Mary's Church can suit a heat pump, though insulation and any heritage protection are checked first.
Nettlestead is about 5 miles west of Maidstone, in Kent. Homes and businesses alike in Nettlestead, we can help with air source heat pumps. You will hear back from us the same working day and our emergency line runs 24/7. Our list for Kent has 922 entries, and Nettlestead is one. There’s also a page for Bromley, roughly 20 miles from Nettlestead.
All of ME18 is covered, from busy streets to back roads. Our engineers work on Henrys Close, Glenleigh Road and Orchard Crescent and nearby roads. Close to Nettlestead, our area also takes in Wateringbury (1 mile north-east), Red Hill (1 mile north-east), Teston (1 mile north-east), Nettlestead Green (1 mile south) and West Farleigh (2 miles east). Further out, we also cover Maidstone (5 miles east), Sittingbourne (15 miles north-east), Sevenoaks (10 miles west) and Royal Tunbridge Wells (10 miles south-west).
Near you in Nettlestead
Around Nettlestead, our work takes us to homes and businesses near The Railway pub and the streets around them. There’s a railway station in Nettlestead itself: Wateringbury station. Well-known places in the area include Teapot Island (1.9 miles south) and Leybourne Castle (3.8 miles north).
Leave it or put it right?
Planning rules have specific conditions. Checking the position for your home at the survey stage avoids surprises later covering listed buildings, conservation areas and any Article 4 direction. A dirty or faulty system works harder and costs more to run.
Putting several jobs into one visit often makes better use of the time. Mention every unit or room you need covered, and you will get one fixed price.
Why us?
- Clear warranty information from the manufacturer
- MCS certified for heat pumps
- Enquiries answered the same working day
- A site survey and a fixed-price quote
Take a look at how installs are priced and our accreditations and certificates.
What happens on the day
Protection comes first: dust sheets over floors and furniture near the work and nothing is moved without asking you. Then the electrics are made safe and the work begins. It takes a few days on site, depending on the cylinder, the radiators and the pipework involved, and we tidy up before we leave. Visits to Nettlestead are agreed with you in advance and planned so the job can be finished in one trip where possible.
- First we talk through the property and the current system.
- We measure heat loss for every room.
- We design the system, check the radiators and cylinder and look at the outdoor unit position.
- You get a fixed price, with any grant and the VAT set out.
- We install, commission and register the system under MCS.
How to prepare
- Make sure someone can let us in at the agreed time
- Let us know where the consumer unit is
- Tell us about access, such as roof hatches, high walls or locked plant areas
Ask for a quote
To get a fixed-price quote, call 07833 053749 or use the quote form and tell us about the property and what you need. A few photos make it quicker. We reply to enquiries the same working day.
Advice
Looking after it afterwards
To keep the system working properly:
- Keep radiators clear
- Book a yearly service
- Know the servicing conditions in your warranty
We show you how to use the controls and explain how a heat pump works differently from a boiler. Heat pumps tend to work best running steadily rather than in short bursts so we set the controls up with you.
Heat pumps prefer steady, low-temperature running, using the settings agreed at handover.
Places near Nettlestead
What else we do in Nettlestead
What a customer said
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager