Oxfordshire · Heat pump installation

Heat pump installers in Moulsford

Looking for air source heat pumps in Moulsford? We diagnose first, fix the price and book the work around you, then sign it off with written records.

  • Not knowing whether a grant applies
  • Deciding on the outdoor unit position
  • Comparing heat pump types

Air source heat pumps in Moulsford

About our air source heat pumps in Moulsford

Air-to-water heat pumps heat your hot water through a cylinder. If you have a combi boiler and no cylinder, the survey looks at where one could go. With air-to-air, hot water has to come from something else. The work covers homes heated by oil, LPG or gas, underfloor heating and air-to-air heat pumps, and the jobs we see most are wanting to stop using oil, LPG or gas for heating and choosing between air-to-water and air-to-air.

If your home in or near Moulsford is heated by oil, LPG or electric heaters with no mains gas, the Boiler Upgrade Scheme adds an extra £1,500 until March 2027 for an air source or ground source heat pump.

Warranty periods vary by brand and by product. For example, Daikin’s standard warranty on split air conditioning is 2 years, and its longer extensions apply to its air-to-water units only. Whatever the brand, the manufacturer’s terms are explained on your quote.

Where
Moulsford (OX10)
Wider area
Oxfordshire
Quote
A fixed-price quote up front
Certified
F-Gas certified, NICEIC approved, MCS
Costs
Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
Phone
07833 053749
Reviewed
30 October 2026

Common questions in Moulsford

Does the Boiler Upgrade Scheme cover homes in Moulsford?

Yes, if the home and the heat pump meet the scheme’s rules: Moulsford is in England, where it applies. The amount depends on the type of heat pump, and the survey confirms which applies. The installer applies, and we’re MCS certified.

Do you cover smaller places like Moulsford?

Yes. Moulsford is within the area we cover across London and the South East. Visits to smaller places are planned so the engineer arrives with what the job needs.

Do you survey before quoting?

Yes. For simple jobs, pictures and a few details can be enough, while larger systems and faults that need testing are seen on site.

Do I need new radiators for a heat pump?

Some radiators may be fine as they are, and some may need to be larger. At the lower temperatures a heat pump uses, radiators need more surface, and the survey checks each one.

What does F-Gas certified mean?

The law says any company working on equipment containing F gas has to be certified, and the engineers need their own qualifications. It’s how you know the refrigerant is being handled legally and safely.

Can I do the refrigerant work myself?

No, not the refrigerant side. The F-gas rules require certified companies and qualified engineers for it, and a new circuit is notifiable under Part P unless a registered electrician, such as a NICEIC approved contractor, does it.

Will you work on another installer’s system?

Yes. We work on systems fitted by other installers as well as our own from all the leading brands. Tell us the make and model and send any paperwork you have.

For landlords and property managers

Bigger systems bring extra duties: systems with an effective rated output over 12 kW need a TM44 inspection by an accredited energy assessor at least every 5 years. We can arrange it, prepare the system for it and fix what it finds.

We also work for facilities teams in offices, schools and public buildings in Moulsford and across Oxfordshire. Larger buildings can be done in stages around the people who use them.

Common problems we fix in Moulsford

Some people want to move away from burning fossil fuels at home. A heat pump runs on electricity and takes heat from the outside air and that’s the appeal for many households.

Any of these is worth a proper look:

  • Choosing between air-to-water and air-to-air
  • Questions about the Boiler Upgrade Scheme
  • Replacing a combi boiler with a heat pump

Live in one of the older houses around Church of St John the Baptist? Expect the survey to look closely at heat loss and at the building’s planning status.

What to look for in a quote

  • Exactly what the price includes, from supply and fitting to commissioning
  • Whether anyone has checked the property or the system first
  • Whether they hold F-Gas company certification, not just individual qualifications

How to choose an air conditioning engineer

What owners can safely do

Do not move, re-route or disconnect units or pipework yourself. Moving a unit involves the refrigerant circuit, so it needs an F-Gas qualified engineer, and the electrical side needs a competent person. Ask us to quote for a move instead.

Never try to top up, release or handle refrigerant yourself. Under the F-gas rules, engineers need their own qualifications and the company must be certified, and escaping refrigerant can cause cold burns. If you suspect a leak, switch the system off and call us.

What we do, step by step

You don’t need to do much on the day. Someone needs to let us in and show us the units, or where they’re going, and the rest is down to us. Before we leave, the area is tidied and we explain what we’ve done. Rural lanes and tight entrances are worth mentioning before a visit to Moulsford.

  1. We find out about your home and the heating you have now.
  2. We measure heat loss for every room.
  3. From those figures we size the heat pump and decide on radiators, cylinder and outdoor position.
  4. Cost, grant and VAT appear on one fixed-price quote.
  5. Installation, commissioning and MCS registration complete the job.

Getting ready for the visit

  • Make sure we can reach the consumer unit or fuse board
  • Mention any roof access, ladders or high-level work
  • Let us know if the building has a permit or sign-in process

How to get a quote

VAT is set out clearly on every quote, with the rate that applies to your job. Homes, businesses and different kinds of work can be treated differently for VAT, so we confirm it on the quote. For a fixed-price quote, call us on 07833 053749 or fill in the contact form.

Get a price

Read more

Homes in Moulsford and heat pumps

Historic England lists about 17 buildings and structures within half a mile of the centre of Moulsford, including Sphinx Hill (grade II*). For a heat pump, permitted development doesn’t apply within the grounds of a listed building, and in a conservation area the outdoor unit can’t go on a wall or roof facing a road, so we check with the local planning authority (normally South Oxfordshire council) where needed. The Valuation Office Agency’s council tax figures show about 42% of homes across Moulsford and its surrounding area were built in 2000 or later, and the 2021 Census found about 72% of households in detached or semi-detached houses. Newer homes usually lose less heat, which tends to suit a heat pump well. Detached and semi-detached houses normally have room for the outdoor unit and a cylinder.

Basildon Park lies about 3.9 miles south. Owners of listed homes need consent before a heat pump is fitted, so it’s one of our first questions.

Moulsford is about 6 miles south-east of Didcot, in Oxfordshire. Whatever kind of property you have in Moulsford, we can help with air source heat pumps. You will hear back from us the same working day, and there’s a 24/7 emergency line. Count every place we list in Oxfordshire and you reach 443, with Moulsford on the list. There’s also a page for Guildford, roughly 33 miles from Moulsford.

From The Street, Glebe Close and Willow Court Lane to the smaller roads in between, the whole area is covered. Our working area takes in OX10, every street of it. Neighbouring places we cover include South Stoke (1 mile east), Cholsey (1 mile north), North Stoke (2 miles north-east), Streatley (2 miles south) and Goring (2 miles south). Further out, we also cover Oxford (14 miles north), Didcot (6 miles north-west), Abingdon-on-Thames (10 miles north-west) and Thame (15 miles north-east).

Near you in Moulsford

In Moulsford, that means homes and buildings near South Stoke Primary School and The Perch and Pike pub, among other places. For rail, the closest station is Cholsey station, roughly 1.3 miles north of the centre. A little further out are Wallingford Castle (3.7 miles north). Green spaces nearby include Withymead Nature Reserve and Churn Hill.

Map of Moulsford © OpenStreetMap contributors

From one of our customers

“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”

David W., Haywards Heath

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead