Kent · Heat pump installation

Air Source Heat Pumps in Marden Beech

Our engineers work in Marden Beech on heat pump installation. Diagnosis first, a fixed price and proper paperwork when we finish.

  • Questions about listed buildings or conservation areas
  • Replacing a combi boiler with a heat pump
  • Choosing between air-to-water and air-to-air

Need air source heat pumps in Marden Beech?

Air source heat pumps in Marden Beech

An air-to-water heat pump costs £8,000–£16,000 (0% VAT on homes), before the grant. In England and Wales, the Boiler Upgrade Scheme offers a £7,500 grant towards an eligible air-to-water installation, and as the installer we apply for it on your behalf. Eligibility depends on the property, so we confirm it before anything is agreed. If you are dealing with deciding on the outdoor unit position and working out where a cylinder could go, we can sort it out.

Homes around Marden Beech typically have room outside for a heat pump, so the design comes down to heat loss, radiators and hot water.

For a fault on a system that may still be under warranty, send us the make, model and installation date. We will tell you how the manufacturer’s warranty is likely to apply before any chargeable work goes ahead.

Where
Marden Beech (TN12)
Region
Kent
Quote
A fixed price before we start
Enquiries
Answered the same working day
Typical price
£8,000–£16,000 before the grant, 0% VAT on homes
Certified
F-Gas certified, NICEIC approved, MCS
Call
07833 053749
Checked
30 October 2026

Heat pumps in Marden Beech: local notes

About 36% of homes in Marden Beech and the neighbourhoods around it were built before 1919, according to Valuation Office Agency council tax records, and about 71% of households live in detached or semi-detached houses, according to the 2021 Census. Period properties can still suit a heat pump, but the design has to start from accurate heat loss figures. Finding room for the outdoor unit and a cylinder is seldom a problem in homes like these.

Older homes near St Michael and All Angels Church may need extra checks for planning and heat loss before a heat pump is designed. Sizing comes from the heat each room loses on a cold day, not from the size of the old boiler.

Marden Beech is about 8 miles south of Maidstone, in Kent. Wherever you are in the TN12 postcode area, our engineers can take on air source heat pumps. Marden Beech is one of 922 towns, villages and districts in Kent where we work for homes and businesses. East Grinstead is in our area too, around 21 miles away.

Our working area takes in TN12, every street of it. We also cover the places around Marden Beech: Marden (1 mile north-east), Claygate (2 miles north-west), Brandfold (2 miles south), Capel Cross (2 miles south-west) and Pearson's Green (2 miles west). Within a short drive, we also cover Maidstone (8 miles north), Sevenoaks (15 miles north-west), Royal Tunbridge Wells (9 miles west) and Tonbridge (9 miles west).

Around Marden Beech

Marden Beech’s nearest station is Marden station, roughly 1.1 miles north-east. Other landmarks nearby include South East Romany Museum (1.6 miles north-east).

Map of Marden Beech © OpenStreetMap contributors

Your questions about air source heat pumps in Marden Beech

Is planning permission needed for a heat pump in Marden Beech?

There’s no single answer: the building and the outdoor unit position decide it. Historic England lists about 11 buildings and structures within half a mile of the centre of Marden Beech. A heat pump on a house can be permitted development if it meets the conditions, including the MCS noise check, but not within the grounds of a listed building, and in a conservation area the outdoor unit can’t face a road. Where necessary, we check with the local planning authority (for Marden Beech, typically Maidstone council).

Is Marden Beech within the area you cover?

We do. Villages and hamlets get the same service as the bigger towns. We’re based in East Grinstead and plan each visit so the job can be finished in one trip where possible.

Am I eligible for a heat pump grant?

It depends on your home and the system. The scheme gives £7,500 for eligible air-to-water or ground source systems, and £2,500 for air-to-air only under strict conditions. We check before you commit.

How does the warranty work?

The manufacturer’s warranty, on the manufacturer’s terms. Each brand sets its own conditions and periods, so we explain them on your quote.

How much time does a heat pump install need?

Expect it to take several days for an air-to-water system with a new cylinder, less for an air-to-air system. How much of the heating changes decides most of the time, and we confirm the timing with your quote.

Do you offer emergency call-outs?

Yes. If something urgent happens, like water coming from a unit or a critical room overheating, call our 24/7 line and we’ll agree what happens next.

Should I choose air-to-water or air-to-air?

Air-to-water heats radiators or underfloor heating and hot water; air-to-air heats rooms through indoor units and can cool them. Air-to-air doesn’t heat hot water, and we explain which suits your home.

Why act early in Marden Beech

Choosing between air-to-water and air-to-air is easier with the facts. Air-to-water heats radiators and hot water, and can attract a £7,500 grant where eligible; air-to-air heats and cools rooms, and only qualifies for £2,500 under strict conditions. We explain which makes sense for you. Getting the date in early helps for a place like Marden Beech.

Putting several jobs into one visit often makes better use of the time. Tell us about everything you’d like looked at, and you will get one fixed price.

Why people in Marden Beech choose us

  • Electrical work covered by our NICEIC approval
  • Members of Checkatrade
  • A reply the same working day
  • Diagnosis first, then a fixed price

See our cost guide or how to check a contractor.

Let and managed properties

Bigger systems bring extra duties: a TM44 inspection by an accredited energy assessor is required at least every 5 years for systems over 12 kW. We arrange the inspection, get the system ready and put right anything it picks up.

Records are where property maintenance often slips. Every visit is written up, plus the F-Gas records where refrigerant is involved, ready for a tenant, a buyer or an inspection.

The process

Think of the visit in three stages: diagnose, treat and sign off. First comes a careful look at the system or the space, then we do the work, and finally everything is tested, recorded and explained. The middle part takes longest, and that takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes. Visits to Marden Beech are agreed with you in advance and planned so the job can be finished in one trip where possible.

  1. First we talk through the property and the current system.
  2. We measure heat loss for every room.
  3. The design covers the heat pump, emitters, hot water and outdoor unit.
  4. You get a fixed price, with any grant and the VAT set out.
  5. Then it’s fitted, commissioned and registered with MCS.

Getting ready for the visit

  • Give us access to the outside wall, roof or yard where the outdoor unit sits
  • Mention any managing agent or landlord rules we need to follow
  • Keep pets and children away from the work area

Getting a price

Need a price for air source heat pumps? Please ring us on 07833 053749 or fill in the contact form with a few details about the property. We will talk you through the options and give you a fixed-price quote before anything is booked.

Get a quick quote

Related advice

Looking after your system

After the visit, a few habits help:

  • Keep up with insulation and draught-proofing
  • File the MCS certificate safely
  • Ask about the grant before you commit

Once commissioned, we register the installation with MCS and give you the certificate. File it with the warranty documents, as you may need it later.

Keep the outdoor unit clear of leaves, plants and stored items. Airflow is what it runs on so keep it unobstructed.

A customer’s words

“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”

Sarah M., East Grinstead

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead