Kent · Heat pump installation
Heat pump installation in Brandfold, Kent
Our engineers work in Brandfold on heat pump installation. A look at the job first, a fixed-price quote and written records at the end.
- No space for a hot water cylinder
- Questions about listed buildings or conservation areas
- Deciding which kind of heat pump suits the home
Air source heat pumps in Brandfold
Every installation starts with a heat loss survey. It shows how much heat each room needs on a cold day, so the heat pump and the radiators or indoor units can be sized properly. Sizing by rule of thumb is not good enough. If you’re dealing with planning and permitted development questions and comparing heat pump types, we can help.
Older and listed homes in villages like Brandfold need extra care, because permitted development doesn’t apply within the grounds of a listed building, so we check consent first.
Refrigerant work is written up in the F-Gas records: the work carried out, the refrigerant involved and the quantities. File them with the system’s paperwork, ready for the next service or a warranty query.
- Place
- Brandfold (TN17)
- Region
- Kent
- Credentials
- F-Gas certified, NICEIC approved, MCS
- Guide price
- Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
- Price
- A fixed-price quote up front
- Enquiries
- We reply the same working day
- Call
- 07833 053749
- Checked
- 30 October 2026
Questions from Brandfold
Is the heat pump grant available in Brandfold?
Yes, if the home and the heat pump meet the scheme’s rules: Brandfold is in England, where it applies. Air-to-water and ground source systems attract £7,500. Air-to-air gets £2,500, but only where it takes over from fossil-fuel heating and covers the whole home’s heating demand. The installer applies, and we’re MCS certified.
Will a heat pump in Brandfold need planning permission?
That depends on the building and where the outdoor unit goes. Central Brandfold sits inside a conservation area. The permitted development rules for heat pumps leave out listed buildings and stop outdoor units going on road-facing walls or roofs in conservation areas. Anything outside the rules needs an application, and we raise it with the planning department at Tunbridge Wells council, typically the authority for Brandfold first.
How quickly will you reply?
We reply to enquiries the same working day. For a breakdown that cannot wait, call our 24/7 emergency line.
Are my radiators big enough for a heat pump?
It depends on each radiator and the room it heats. Heat pumps run at lower flow temperatures, so radiators give out less heat so we check every radiator against the room’s heat loss.
Do you look at the job first?
Yes. We always look before we price, on a survey, or from your pictures and details where the job is simple. A fixed-price quote follows.
Can we book visits on a schedule?
Yes. Tell us what you have and how it’s used and we’ll propose a schedule and quote for it. That can include the leak checks the F-gas rules require for larger systems.
Which type of heat pump is right for my home?
Air-to-water suits homes with radiators and a cylinder; air-to-air suits rooms that need heating and cooling, and we help you choose. We install both types.
When to call us in Brandfold
For homes with no mains gas, heated by oil or LPG, a heat pump is well worth considering. The Boiler Upgrade Scheme includes an extra £1,500, until March 2027, for air source or ground source heat pumps in homes heated by oil or LPG with no mains gas where the home is eligible.
Most people get in touch when they notice one of these:
- Ageing boilers that will need replacing
- No space for a hot water cylinder
- Deciding which kind of heat pump suits the home
If your home is listed, like Scotney Castle about 3.5 miles south-west, listed building consent comes before any heat pump work.
Comparing quotes
- How VAT is shown, and which rate applies
- How extra work would be agreed if they find something unexpected
- The make and model of any parts or equipment being quoted
Also near Brandfold
More services for Brandfold
How the job changes from property to property
Radiators and underfloor heating
Any radiator changes are set out in the quote, so the work is clear.
Air-to-water heat pumps
An air-to-water heat pump heats water for your radiators or underfloor heating and your hot water cylinder. It takes over from the boiler, and is MCS certified when we install it.
The process
Everything the job needs comes with us, from tools and test equipment to ladders and dust sheets. All we ask is clear access to the units, or to where they’ll go, and to the consumer unit. The visit takes from a couple of days to around a week, depending on the system and how much of the heating changes. For a village like Brandfold, tell us about narrow lanes, gates and parking when you book.
- First, a chat about the property and your goals for the heating.
- The survey checks heat loss, emitters, hot water and the outdoor unit position.
- We recommend air-to-water or air-to-air and check the grant position.
- We install the heat pump and connect it up.
- After commissioning, you get the MCS certificate and a handover.
How to prepare
- Have the make and model of any existing unit to hand
- Keep pets and children away from the work area
- Clear the space around the indoor unit, or where it will go
How to get a quote
Need a price for air source heat pumps? Please ring us on 07833 053749 or fill in the contact form and tell us about the job. We will explain what we’d recommend and why, then send a fixed-price quote before anything is booked.
Read more
What a heat pump looks like in Brandfold
About 47% of homes in and around Brandfold were built before 1919, according to Valuation Office Agency council tax records, and the 2021 Census found about 78% of households in detached or semi-detached houses. In older homes, the heat loss calculation is especially important, as solid walls and draughts change the size of heat pump needed. Finding room for the outdoor unit and a cylinder is seldom a problem in homes like these.
Older homes near St Mary's Church may need extra checks for planning and heat loss before a heat pump is designed.
Brandfold is about 8 miles east of Royal Tunbridge Wells, in Kent. From the centre of Brandfold to the outskirts, we cover air source heat pumps, from a single room to a whole building. Count every place we list in Kent and you reach 922, with Brandfold on the list. For properties nearby, see our East Grinstead page, about 21 miles away.
Our nearest recent job to Brandfold was on Beacon Road, Crowborough (TN6), about 14 miles south-west: installing a Mitsubishi Electric multi-split system serving four bedrooms and a large home office.
If you need air source heat pumps at a property on Gore Lane and Lidwells Lane or a nearby road, our engineers can take on the work. Our working area takes in TN17 in full. If you are just outside Brandfold, we cover Broad Ford (1 mile west), Capel Cross (1 mile north-west), Goudhurst (1 mile south), Smallbridge (1 mile south-west) and Horsmonden (2 miles north-west). Further out, we also cover Maidstone (10 miles north), Royal Tunbridge Wells (8 miles west), Tonbridge (9 miles north-west) and Kings Hill (10 miles north).
Near you in Brandfold
Around Brandfold, our work takes us to homes and businesses near The Gill, among other places. The closest station to Brandfold is Marden station, roughly 3.4 miles north. Well-known places in the area include Finchcocks Musical Museum (2.4 miles south-west) and Old Scotney Castle (3.5 miles south-west).
Looking after it afterwards
A little care keeps the system in better shape. Our advice:
- Find out the grant position at the survey
- Store the MCS certificate and warranty documents together
- Diary the next service
We show you how to use the controls and explain how a heat pump works differently from a boiler. Heat pumps tend to work best running steadily rather than in short bursts so we set the controls up with you.
Keep insulation and draught-proofing in good order, as lower heat loss means the system has less to do.
A customer’s words
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead