Hampshire · Heat pump installation
Leckford air source heat pumps
Looking for air source heat pumps in Leckford? We diagnose first, fix the price and book the work around you, finishing with proper records.
- Choosing between air-to-water and air-to-air
- Checking eligibility for a heat pump grant
- Replacing a combi boiler with a heat pump
Air source heat pumps in Leckford, done properly
Air source heat pumps collect heat from outdoor air and bring it inside, using electricity to drive the process. The technology is close to air conditioning, which is why we install both, and air-to-air heat pumps are sometimes simply called air conditioning. The work covers underfloor heating, hot water cylinders and air-to-water heat pumps, and common reasons people get in touch are wanting to stop using oil, LPG or gas for heating and checking eligibility for a heat pump grant.
In a place like Leckford, some homes are listed, because permitted development doesn’t apply within the grounds of a listed building, so consent comes first.
Some warranty terms depend on the system being serviced regularly by a qualified engineer. Where yours does, a regular service with us keeps that side in order, and every service is written up.
- Where
- Leckford (SO20)
- Region
- Hampshire
- Certified
- NICEIC approved, F-Gas certified, MCS
- Quote
- Fixed-price quote after a site survey
- Guide price
- Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
- Response
- On the working day you ask
- Call
- 07833 053749
- Reviewed
- 30 October 2026
Homes in Leckford and heat pumps
The last census (2021) found about 85% of households in detached or semi-detached houses. Houses typically have space for an outdoor unit and a hot water cylinder.
A heat loss calculation decides the size of heat pump your home needs. Older homes near Church of St Nicholas may need extra checks for planning and heat loss before a heat pump is designed.
Leckford is about 5 miles south of Andover, in Hampshire. Anywhere in SO20, we can help with air source heat pumps. We cover 683 places across Hampshire, from busy centres to quieter spots. Our Guildford page covers places nearby (39 miles or so).
All of SO20 is covered, from busy streets to back roads. Close by, we work in Longstock (1 mile west), Fullerton (1 mile north), Cottonworth (1 mile north), Chilbolton (2 miles north-east) and Stockbridge (2 miles south-west). We also work in nearby towns such as Winchester (8 miles south-east), Eastleigh (13 miles south-east), Andover (5 miles north) and Totton (15 miles south).
Near you in Leckford
In Leckford, that means homes and buildings near The Peat Spade Public House and Longstock Park. Nearby you’ll also find Andover War Memorial Hospital (5.6 miles north). Open spaces near Leckford include Mill Lake.
Also near Leckford
What else we do in Leckford
What happens if it’s left?
From 1 April 2027, VAT on heat pumps in homes rises from 0% to 5%. If you’re thinking about a heat pump, that date is worth knowing, though the right time also depends on your home and heating. An early booking makes the visit to Leckford easier to arrange.
Height, access and the distance between the indoor and outdoor units can all change the price. We take each of them into account and give you a fixed price before we start.
Why people in Leckford choose us
- MCS certification for heat pump work
- F-Gas company certification
- Electrical work covered by our NICEIC approval
- We work on all the leading brands
Take a look at how installs are priced and how to check a contractor.
Leckford questions
Can I fit a heat pump in Leckford without planning permission?
There’s no single answer: the building and the outdoor unit position decide it. The centre of Leckford is in the Leckford Conservation Area. Heat pumps on houses are often permitted development, but listed buildings need consent and conservation areas restrict outdoor units facing a road. Where it’s needed, we check with the local planning authority (for Leckford, usually Test Valley council).
Will you come out to Leckford?
Yes. Leckford is within the area we cover across London and the South East. We’re based in East Grinstead and plan each visit so the job can be finished in one trip where possible.
Is there VAT on a heat pump?
In residential accommodation, 0% until 31 March 2027 and 5% afterwards. Hotels and businesses pay the standard rate. Please treat this as general information, not tax advice.
Can we book visits on a schedule?
Yes. Tell us what you have and how it’s used and we’ll propose a schedule and quote for it. Leak checks required by the F-gas rules can be built in for larger systems.
Can landlords and managing agents book you?
Yes. From a single let flat to offices, shops and public buildings, the approach is the same: survey or diagnosis, a fixed price and proper paperwork.
Is there a Boiler Upgrade Scheme grant for air-to-air?
Yes, but only where it becomes the home’s main heating. The £2,500 applies when it replaces the fossil-fuel heating, covers the full heating demand, is fitted by an MCS certified installer and serves a home; as an add-on to a boiler it does not qualify.
Who is responsible for leak checks?
The operator of the equipment, working with qualified engineers. Larger systems need regular checks: at least every 12 months from 5 tCO2e and every 6 months from 50 tCO2e. We’ll work out which band applies to yours.
What the work involves, system by system
Air-to-air heat pumps
A £2,500 Boiler Upgrade Scheme grant is available for air-to-air only if it replaces the fossil-fuel heating and meets the full heating demand. It must be installed by an MCS certified installer and be in a home.
The Boiler Upgrade Scheme
Not every home qualifies, so we check before you commit.
Owner checks or an engineer?
On air conditioning, the filters in the indoor unit are typically the one part owners can clean where the manufacturer’s manual explains how. With the power off, they lift out, can be vacuumed or rinsed and must be fully dry before they go back. For a heat pump, the main owner jobs are a clear outdoor unit and sensible control settings.
Write down what you notice: an error code, a new noise, a drip, a smell or a change in how well the system heats or cools. It makes our diagnosis quicker, and a photo of the display helps even more.
How it works
Think of the visit in three stages: look, put right and sign off. First comes a careful look at the system or the space, then we do the work, and finally we test, record and explain. The middle part takes longest, and that takes from a couple of days to around a week, depending on the system and how much of the heating changes. For a village like Leckford, tell us about narrow lanes, gates and parking when you book.
- We start with your plans and the property.
- We survey for heat loss and look at radiators, cylinder space and outdoor unit options.
- We explain which type of heat pump suits the home and whether a grant could apply.
- We install the heat pump and connect it up.
- We commission it, complete the MCS certificate and show you how to use it.
Preparing for the visit
- Clear the space around the indoor unit, or where it will go
- Tell us about any building rules, permits or sign-in
- Unlock any gate, garage or side passage we need
Getting a price
Here’s what helps us quote: where the property is and what kind of building it is, pictures of the rooms or units, the brand and model of anything already fitted and anything you’ve noticed, such as an error code or a noise. Once you have those, ring us on 07833 053749, or email if that’s easier.
Advice
A customer’s words
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead