Hampshire · Heat pump installation

Heat pump installers in Wherwell

Expert air source heat pumps for Wherwell: a survey or diagnosis, a fixed price, careful work and proper paperwork. Ask us for a fixed-price quote.

  • Radiators that may be too small for a heat pump
  • Deciding on the outdoor unit position
  • Not knowing whether a grant applies

Air source heat pumps in Wherwell and nearby

Air source heat pumps in Wherwell, done properly

Heat pumps run at lower flow temperatures than most boilers, so radiators may need to be larger to give out the same heat. The survey shows which rooms are fine and which need changes, and the quote sets it out. Common call-outs are for questions about where the outdoor unit can go and questions about the Boiler Upgrade Scheme, across underfloor heating, radiator systems and hot water cylinders.

Space for an outdoor unit is rarely an issue near Wherwell, so the design comes down to heat loss, radiators and hot water.

Warranty periods vary by brand and by product. For instance, Daikin’s standard warranty on split air conditioning is 2 years, and its longer extensions apply to its air-to-water units only. For any other brand, we explain the manufacturer’s terms on your quote.

Where
Wherwell (SP11)
Wider area
Hampshire
Accreditations
F-Gas certified company, NICEIC approved, MCS
Pricing
Fixed after a survey or pictures
Typical price
£8,000–£16,000 before the grant, 0% VAT on homes
Telephone
07833 053749
Updated
30 October 2026

Air source heat pumps around Wherwell

The last census (2021) found about 85% of households in detached or semi-detached houses. Detached and semi-detached houses usually have room for the outdoor unit and a cylinder.

Every heat pump design starts with a room-by-room heat loss calculation. Older homes near Church of St Peter and Holy Cross may need extra checks for planning and heat loss before a heat pump is designed.

Wherwell is about 3 miles south-east of Andover, in Hampshire. For air source heat pumps in and around Wherwell, it’s easy to get a fixed-price quote: please phone us on 07833 053749 or write to us at info@aircondoctor.co.uk. Our area covers London and the South East, including Wherwell. Our area takes in 683 places across Hampshire, from busy centres to quieter spots. Our Guildford page covers places nearby, about 38 miles away.

If you need air source heat pumps at a property on High Street, Fair Piece and Beech Grove or anywhere close by, our engineers can take on the work. Our working area takes in SP11. If you’re just outside Wherwell, we cover Wherwell Wood (1 mile north-west), Cottonworth (1 mile south-west), Chilbolton (1 mile south), Fullerton (1 mile south-west) and South Harewood (1 mile north-east). Within a short drive, we also cover Winchester (9 miles south-east), Eastleigh (14 miles south), Andover (3 miles north-west) and Chandler's Ford (13 miles south).

What’s near Wherwell

We fit and service air conditioning in homes and premises around White Lion Public House and Longstock Park, among other places. Wherwell’s nearest station is Andover station, about 3.7 miles north-west of the centre. Nearby you will also find Andover Museum (3.3 miles north-west) and Andover War Memorial Hospital (4 miles north-west). For a walk, there’s Mill Lake and Anton Lakes.

Map of Wherwell © OpenStreetMap contributors

Common questions in Wherwell

Does the Boiler Upgrade Scheme cover homes in Wherwell?

Wherwell is in England, where the Boiler Upgrade Scheme runs. The amount depends on the type of heat pump, and the survey confirms which applies. The installer applies, and we are MCS certified.

Do I need planning permission for a heat pump in Wherwell?

There’s no single answer: the building and the outdoor unit position decide it. The Wherwell Conservation Area takes in the middle of Wherwell. On a house, an air source heat pump can often go ahead under permitted development, with an outdoor unit of no more than 1.5 cubic metres and an installation that meets MCS 020(a), which includes a noise check. Those rights don’t reach the grounds of a listed building, and conservation areas rule out walls or roofs facing a road. If that might affect you, we ask Test Valley council, which is typically the planning authority for Wherwell.

Do you work for landlords and businesses?

Yes. From one rented home to commercial buildings, the approach is the same: survey or diagnosis, a fixed price and proper paperwork.

Do I need new radiators for a heat pump?

We find out during the survey. Where a radiator is already large enough, it stays, and any that need upsizing are set out in the quote.

Do you protect the property while you work?

Floors and furniture near the work are covered with dust sheets before any work starts, and we tidy up as we go. At the end, we clear up and show you what we have done.

Which brands do you work with?

We work with the leading brands, from Mitsubishi Electric, Daikin and Fujitsu to Panasonic, Toshiba, LG, Samsung, Mitsubishi Heavy Industries and Hitachi. Send us the make and model if you have it.

When will I hear back?

The same working day. Then we agree a date that works for you, and you get a fixed price before any work goes ahead.

What happens on the day

The first job on site is protection: dust sheets over floors and furniture near the work, and we ask before moving anything. Then the electrics are made safe and the work begins. The work on site takes several days for an air-to-water system with a new cylinder, less for an air-to-air system, and we clear up before we go. For a place like Wherwell, the timing is set with you and the travel is our side of the planning.

  1. It begins with your house and the heating it relies on now.
  2. A heat loss survey is carried out, room by room.
  3. From those figures we size the heat pump and decide on radiators, cylinder and outdoor position.
  4. Cost, grant and VAT appear on one fixed-price quote.
  5. Then it’s fitted, commissioned and registered with MCS.

Getting ready for the visit

  • Name a contact who can meet us at the agreed time
  • Let us know if the units are on a roof, a high wall or in a locked area
  • Give us access to the outside wall, roof or yard where the outdoor unit sits

Getting a quote

To help us quote: where the property is and what kind of building it is, a few photos, the brand and model of anything already fitted and anything you’ve noticed, such as an error code or a noise. Once you have those, call us on 07833 053749 or write to us at info@aircondoctor.co.uk.

Get a price

Read more

Before you call an engineer

Write down what you notice: error codes, noises, drips, smells or a drop in performance. It helps us diagnose quickly, and a photo or a short video of the display is even better.

Owners can handle the everyday basics: keep the outdoor unit clear of leaves, plants and clutter, check the settings and the remote, and follow the cleaning the manual describes. Opening up the units, the electrics and the refrigerant circuit are a job for us.

How we price air source heat pumps

A fixed price needs a few facts first. We check:

  • How many units are involved
  • The brand, model and parts involved
  • How easy the units are to reach

The cost depends on the system and the number of rooms or units, the access and the parts and time the job needs. We give you a fixed price before we start, so there are no surprises.

Before you get in touch

Photos and a few facts are often enough to price a simple job. Useful things to send:

  • The postcode and whether it’s a home, flat or business
  • A close-up of the unit’s label showing the model number
  • Where the outdoor unit is, or where you’d like it

Getting a quote is straightforward. Send a few details and pictures, and we reply the same working day. Where a survey is needed, we arrange a time that suits you.

What the work involves, system by system

Radiators and underfloor heating

Underfloor heating suits a heat pump’s lower flow temperature, and we can connect to it where it’s already in.

Air-to-air heat pumps

The £2,500 grant for air-to-air applies only when the system replaces the fossil-fuel heating and covers the whole home’s demand. It must be installed by an MCS certified installer and be in a home.

From one of our customers

“Very professional from the initial survey through to installation. The engineer explained everything clearly and the quote was exactly what we paid. Would not hesitate to recommend AirCon Doctor.”

David W., Haywards Heath

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead