Surrey · Heat pump installation
Heat pump installation in Kingswood, Surrey
For MCS certified installation of air source heat pumps for heating and hot water, with the Boiler Upgrade Scheme grant applied for in Kingswood, one call is all it takes: diagnosis, fixed price, work and sign-off. F-Gas certified, NICEIC approved and Checkatrade members.
- Checking emitters for a heat pump
- Checking whether planning permission is needed
- Replacing a combi boiler with a heat pump
Air source heat pumps in Kingswood
For an air-to-water heat pump, the price is £8,000–£16,000 (0% VAT on homes), before the grant. In England and Wales, the Boiler Upgrade Scheme offers a £7,500 grant towards an eligible air-to-water installation, and as the installer we apply for it on your behalf. Eligibility depends on the property, so we confirm it before anything is agreed. If the problem is deciding which kind of heat pump suits the home and questions about the Boiler Upgrade Scheme, we can help.
Cottages and older homes near Kingswood can lose heat faster, so a proper heat loss calculation matters. Sometimes insulation first is the better investment.
Some manufacturers make regular servicing by a qualified engineer a condition of their warranty. Where yours does, a regular service with us keeps that side in order, and every service is written up.
- Location
- Kingswood (KT20)
- Region
- Surrey
- Quotes
- Fixed, in writing
- Costs
- Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
- Credentials
- F-Gas certified company, NICEIC approved, MCS
- Call
- 07833 053749
- Checked
- 30 October 2026
Questions from Kingswood
Do I need planning permission for a heat pump in Kingswood?
The answer turns on the property and where the outdoor unit would sit. The Kingswood Conservation Area is close to the centre of Kingswood. The permitted development rules for heat pumps leave out listed buildings and stop outdoor units going on road-facing walls or roofs in conservation areas. Anything outside the rules needs an application, and we raise it with the local planning authority (for Kingswood, normally Reigate and Banstead council) first.
Is the heat pump grant available in Kingswood?
Kingswood is covered, as the scheme runs across England and Wales. Air-to-water and ground source systems attract £7,500. Air-to-air gets £2,500, but only where it takes over from fossil-fuel heating and covers the whole home’s heating demand. The installer applies, and we are MCS certified.
Can you set up regular servicing?
Yes. We offer maintenance contracts, with visits at the interval your system and the manufacturer need. Each visit is written up and F-Gas records kept where they apply.
When will I hear back?
You’ll hear from us the same working day. If it’s an emergency, ring the 24/7 line instead.
Will you make a mess?
We start with protection: dust sheets over floors and anything close to the work. Any drilling is agreed with you first, and we clear up the dust and offcuts when we finish.
Will you work on another installer’s system?
Yes. We work on systems fitted by other installers as well as our own from all the leading brands. Tell us the make and model and send any paperwork you have.
Will I get records for the system?
Yes. It’s the record a manufacturer or the next engineer will ask to see: a dated note of the work, with refrigerant details where they apply.
Heat pumps in Kingswood: local notes
About 32% of homes in Kingswood and the neighbourhoods around it were built between the wars, according to VOA council tax data, and the 2021 Census found about 69% of households in detached or semi-detached houses. Homes of that age often have cavity walls that may or may not be insulated, which the survey checks. Houses normally have space for an outdoor unit and a hot water cylinder.
Fitznells Manor, roughly 4.6 miles north, is a reminder to check your home’s listing status: permitted development doesn’t cover listed buildings.
Kingswood is about 4 miles south-west of Coulsdon, in Surrey. From the centre of Kingswood to the outskirts, our engineers cover air source heat pumps, from small jobs to large ones. Count every place we list in Surrey and you reach 395, with Kingswood on the list.
Our nearest recent job to Kingswood was on Nork Way, Banstead (SM7), about 2 miles north: installing a Mitsubishi Electric multi-split system serving four bedrooms, the study and the living room as part of a whole-house renovation.
Kingswood is on the B2032, which makes it straightforward for our engineers to reach for surveys and visits. We work across KT20 for air source heat pumps and the roads nearby. We also cover the places around Kingswood: Tadworth (1 mile north-west), Lower Kingswood (1 mile south), Walton on the Hill (2 miles south-west), Margery (2 miles south) and Mogador (2 miles south). Within a short drive, we also cover Epsom (4 miles north-west), Horley (8 miles south), Redhill (4 miles south-east) and Ewell (5 miles north-west).
Near you in Kingswood
Typical jobs here are in properties near The Beacon School, Kingswood Arms and Chinthurst School, among other places. There’s a railway station in Kingswood itself: Kingswood station. Other landmarks nearby include The Ashley Centre (3.8 miles north-west) and Walton on the Hill (1.7 miles west). Green spaces nearby include Colley Hill and Cuddington Meadows.
How it works
Think of the visit in three stages: look, put right and sign off. First comes a careful look at the system or the space, then the work itself, and finally we test, record and explain. Most of the time goes on the middle part, and that takes a few days for most air-to-water installations, with air-to-air systems often quicker. Everything the job in Kingswood needs is worked out beforehand.
- First we talk through the property and the current system.
- A heat loss survey is carried out, room by room.
- We design the system, check the radiators and cylinder and look at the outdoor unit position.
- A fixed-price quote explains the cost, the grant position and the VAT.
- We install, commission and register the system under MCS.
Preparing for the visit
- Name a contact who can meet us at the agreed time
- Find the manual or the paperwork for the system, if you have it
- Tell us about any building rules, permits or sign-in
Get a fixed-price quote
For a fixed-price quote, call 07833 053749 with the address and a few details about the rooms or units involved. A few pictures make it quicker. You will hear back from us the same working day.
Advice
Why deal with it now?
For eligible off-gas homes on oil or LPG, an extra £1,500 is on offer until March 2027. If that applies to you, it’s worth asking about sooner rather than later. Booking before summer means the work near Kingswood is done before the hot weather.
Typical ranges are on our prices page, but your price depends on the job in front of us. Call for a fixed-price quote, and we’ll talk you through it.
What you get with us
- Emergency calls taken 24/7
- Every job looked at before it’s priced
- Covering London and the South East
- Leading brands including Daikin, Mitsubishi Electric and Fujitsu
Read what air conditioning costs or how to check a contractor.
Also near Kingswood
What else we do in Kingswood
Do you need air source heat pumps in Kingswood?
Homes off the gas grid, heated by oil or LPG, are often good candidates to look at. The Boiler Upgrade Scheme includes an extra £1,500, until March 2027, for air source or ground source heat pumps in homes heated by oil or LPG with no mains gas where the home is eligible.
Look out for these signs:
- Replacing a combi boiler with a heat pump
- Choosing between air-to-water and air-to-air
- An oil, LPG or gas boiler near the end of its life
Older homes near Church of St Andrew may need extra checks for planning and heat loss before a heat pump is designed.
Questions to ask before you book
- Exactly what the price includes, from supply and fitting to commissioning
- Who does the electrical work, and whether they can certify it
- If the figure could change on the day
What affects the cost of air source heat pumps
The diagnosis comes before the price. The main factors are:
- The size of the job
- What we find on the survey or diagnosis
- The electrical supply and whether a new circuit is needed
Homes, offices, shops and public buildings are all priced the same way: what’s needed, how we reach it, the parts and the labour. Ask for a fixed-price quote and we will go through it with you.
Helping us quote
The more you tell us, the more accurate the quote. When you get in touch, it helps to send:
- The postcode and whether it’s a home, flat or business
- Any error code or flashing light on the display
- A close-up of the unit’s label showing the model number
Quotes don’t take long. Send a few details and pictures, and we reply the same working day. Where a survey is needed, we arrange a time that suits you.
A customer’s words
“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”
Sarah M., East Grinstead