Oxfordshire · Heat pump installation

Heat pump installation in Kingston Lisle, Oxfordshire

For heat pump installation in Kingston Lisle, one call is all it takes, from the first look to sign-off. An F-Gas certified company, NICEIC approved, on Checkatrade.

  • A boiler that is getting old
  • Deciding on the outdoor unit position
  • Replacing a combi boiler with a heat pump

Air source heat pumps across Kingston Lisle

About our air source heat pumps in Kingston Lisle

Heat pumps run at lower flow temperatures than most boilers which means some radiators may need upsizing. The survey shows which rooms are fine and which need changes and anything that needs changing is in the quote. Typical jobs include plans to switch to electric heating with a heat pump and no space for a hot water cylinder, across radiator systems, homes heated by oil, LPG or gas and underfloor heating.

Older and listed homes in villages like Kingston Lisle need extra care, because permitted development doesn’t apply within the grounds of a listed building, so we check consent first.

Refrigerant work is written up in the F-Gas records: the work carried out, the refrigerant involved and the quantities. File them with the system’s paperwork, ready for the next service or a warranty query.

Place
Kingston Lisle (OX12)
Wider area
Oxfordshire
Quotes
A fixed price before any work starts
Prices
Air-to-water £8,000–£16,000 before any grant (0% VAT for homes)
Accreditations
NICEIC and F-Gas, MCS
Telephone
07833 053749
Page updated
30 October 2026

How it works

The first job on site is protection: dust sheets over floors and furniture near the work and nothing is moved without asking you. After that, anything electrical is made safe and we start. It takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes, and we clear up before we go. Rural lanes and tight entrances are worth mentioning before a visit to Kingston Lisle.

  1. It begins with your house and the heating it relies on now.
  2. We measure heat loss for every room.
  3. We design the system, check the radiators and cylinder and look at the outdoor unit position.
  4. Cost, grant and VAT appear on one fixed-price quote.
  5. Then it’s fitted, commissioned and registered with MCS.

Before we arrive

  • Clear a path to the units and the space around them
  • Give us access to the outside wall, roof or yard where the outdoor unit sits
  • Make sure someone can let us in at the agreed time

Ask for a quote

Here’s what helps us quote: where the property is and what kind of building it is, photos of the rooms or units, the brand and model of anything already fitted and any symptoms, from error codes to drips. Then call us on 07833 053749 or write to us at info@aircondoctor.co.uk.

Get a quick quote

Read more

Looking after your system

How well a system lasts depends on use and care. We suggest:

  • Leave space around the outdoor unit
  • Ask about the grant before you commit
  • Diary the next service

We show you how to use the controls and explain how a heat pump works differently from a boiler. Heat pumps tend to work best running steadily rather than in short bursts so we set the controls up with you.

Keep radiators and indoor units unobstructed so the heat can get into the room.

What the work involves, system by system

Hot water cylinders

Existing cylinders may not be suitable for a heat pump and we tell you if it needs replacing.

Outdoor unit position and planning

The outdoor unit needs a position with good airflow, a solid base and a sensible pipe route. We also consider neighbours and noise, as MCS 020(a) includes a noise check.

Questions from Kingston Lisle

Can I fit a heat pump in Kingston Lisle without planning permission?

It comes down to the building and the spot chosen for the outdoor unit. There’s a conservation area, the Kingston Lisle Conservation Area, close to central Kingston Lisle. Heat pumps on houses are often permitted development, but listed buildings need consent and conservation areas restrict outdoor units facing a road. Where it’s needed, we check with the local planning authority (for Kingston Lisle, typically Vale of White Horse council).

Will you come out to Kingston Lisle?

We do. Villages and hamlets get the same service as the bigger towns. We’re based in East Grinstead and plan each visit so the job can be finished in one trip where possible.

Do you have a 24/7 line?

Yes. If something urgent happens, like water coming from a unit or a critical room overheating, call our 24/7 line and we will tell you what to do first.

Will my home qualify for the Boiler Upgrade Scheme?

Not every home qualifies, so we check. Only one grant is available per property, it cannot replace a low-carbon system, and hybrids do not qualify, among other rules.

Who has to arrange F-Gas leak checks?

Whoever operates the equipment, together with the technicians who service it. Systems below 5 tCO2e fall outside the set leak check intervals, while larger ones need checks at least every 12 months, or every 6 months from 50 tCO2e. We can tell you which band your system falls into.

How much VAT is charged on a heat pump in a home?

Homes pay 0% VAT on a heat pump installation until 31 March 2027, then 5%. Hotels and businesses pay the standard rate. Please treat this as general information, not tax advice.

How quickly will you reply?

We reply to enquiries the same working day. For a breakdown that cannot wait, call our 24/7 emergency line.

What affects the cost of air source heat pumps

Our prices page gives typical ranges, and your quote is built on your job. The quote depends on:

  • The equipment or parts the job needs
  • One-off work versus a regular service cycle
  • The size of the job

A single unit or a whole estate, we price it on the same basis: the work involved, the access and the equipment. The price is fixed before any work starts, with VAT shown clearly.

Asking for a quote

Photos let us diagnose from a distance. Try to include:

  • A photo of the consumer unit with the cover closed
  • Your installation or service records
  • Any error code or flashing light on the display

Our prices page gives typical ranges, but your quote is based on your job, because every property is different. After a look at the job, by photos or a survey, the price is fixed. To get going, ring 07833 053749 or drop us a line.

Air source heat pumps around Kingston Lisle

VOA council tax data show about 40% of homes across Kingston Lisle and its surrounding area were built in 2000 or later, and the 2021 Census found about 81% of households in detached or semi-detached houses. Lower heat loss in recent homes often means a smaller heat pump and fewer radiator changes. Houses typically have space for an outdoor unit and a hot water cylinder.

Live in one of the older houses around Church of St John the Baptist? Expect the survey to look closely at heat loss and at the building’s planning status. Ashdown House lies about 4.7 miles south-west. Owners of listed homes need consent before a heat pump is fitted, so it’s one of our first questions.

Kingston Lisle is about 5 miles west of Wantage, in Oxfordshire. Anywhere in OX12, we can help with air source heat pumps. 443 places in Oxfordshire are on our list, from busy centres to quieter spots. The nearest of our city pages is Guildford, around 48 miles from Kingston Lisle.

Here we cover the OX12 postcode area. Our engineers work on Hill View, Drove Way and Fawler Road and the roads around them. Close to Kingston Lisle, our area also takes in Westcot (1 mile east), Sparsholt (1 mile east), Woolstone (2 miles west), Upper Lambourn (5 miles south) and Sheepdrove (5 miles south). Larger places within reach include Didcot (12 miles east), Abingdon-on-Thames (12 miles north-east), Witney (14 miles north) and Carterton (13 miles north).

Landmarks near Kingston Lisle

Nearby you’ll also find Faringdon Day Hospital (5.2 miles north-west) and Uffington Museum (1.7 miles north-west). Green spaces nearby include Whitehorse Hill and Seven Barrows.

Map of Kingston Lisle © OpenStreetMap contributors

What a customer said

“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”

Sarah M., East Grinstead

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead