Oxfordshire · Heat pump installation
Heat pump installers in Kingston Bagpuize
Need air source heat pumps in Kingston Bagpuize? We look at the job first, give you a fixed-price quote and do the work at a time that suits you, finishing with proper records.
- Checking emitters for a heat pump
- Deciding which kind of heat pump suits the home
- An oil, LPG or gas boiler near the end of its life
Looking after it afterwards
Aftercare is straightforward, and it makes the next visit easier:
- Clear leaves and debris from the outdoor unit
- Keep radiators clear
- Check eligibility for the Boiler Upgrade Scheme early
After commissioning, the installation is registered under MCS and you receive the certificate. Keep it with the manufacturer’s paperwork, as you may need it later.
Keep radiators and indoor units unobstructed so the heat can get into the room.
Air source heat pumps in Kingston Bagpuize, done properly
Installing an air source heat pump in a home is zero-rated for VAT until 31 March 2027, then 5%. That follows HMRC Notice 708/6, and it does not apply to businesses, and for air-to-air systems we confirm the VAT on your quote. Please treat this as general information rather than tax advice. The work covers radiator systems, air-to-water heat pumps and air-to-air heat pumps, and common reasons people get in touch are an oil, LPG or gas boiler near the end of its life and questions about where the outdoor unit can go.
For a house near Kingston Bagpuize, space outside is rarely the problem, so heat loss, radiators and the electrics are what we check.
Equipment warranty comes from the manufacturer, on its own terms, and we explain those terms on your quote. Terms differ from brand to brand, and we’re happy to talk you through them.
- Location
- Kingston Bagpuize (OX13)
- Wider area
- Oxfordshire
- Price
- Fixed after a survey or photos
- Approvals
- NICEIC approved, F-Gas certified, MCS
- Prices
- £8,000–£16,000 before the grant, 0% VAT on homes
- Telephone
- 07833 053749
- Page updated
- 30 October 2026
How the job changes from property to property
Radiators and underfloor heating
Heat pumps run at lower flow temperatures, so radiators may need to be larger so we check them against each room’s heat loss.
Air-to-water heat pumps
Air-to-water systems work at lower temperatures than boilers, so radiator sizes matter.
Also near Kingston Bagpuize
What else we do in Kingston Bagpuize
The process
Every visit follows the same order: agree the plan on site, protect the area, carry out the job, test what we have done and explain it all to you. The visit itself takes anything from a couple of days for air-to-air to the best part of a week for air-to-water with radiator changes. Photos of the existing unit and its label help with repairs and servicing near Kingston Bagpuize.
- You tell us about the home and what you want from a heat pump.
- The survey checks heat loss, emitters, hot water and the outdoor unit position.
- You get our view on the right type for the house, and on whether the Boiler Upgrade Scheme applies.
- Installation follows on the agreed dates.
- After commissioning, you get the MCS certificate and a handover.
Preparing for the visit
- Keep pets and children away from the work area
- Tell us about access, such as roof hatches, high walls or locked plant areas
- Tell us about any building rules, permits or sign-in
How to get a quote
For air source heat pumps in Kingston Bagpuize, give us a ring on 07833 053749 or email us. Let us know the type of property and what you need, plus some photos if they’re to hand. We reply the same working day.
Advice
Air source heat pumps in Kingston Bagpuize: the local picture
About 37% of homes in and around Kingston Bagpuize have been built since 2000, according to the Valuation Office Agency’s council tax figures, and Census 2021 figures found about 86% of households in detached or semi-detached houses. Better insulated, newer homes are often a good match for a heat pump. Detached and semi-detached houses normally have room for the outdoor unit and a cylinder.
Older homes near Church of St John the Baptist may need extra checks for planning and heat loss before a heat pump is designed. With Longworth House about 1.4 miles north-west, it’s worth asking whether your own home is listed before planning a heat pump.
Kingston Bagpuize is about 6 miles west of Abingdon-on-Thames, in Oxfordshire. Homes and businesses alike in Kingston Bagpuize, our engineers can help with air source heat pumps. We reply to enquiries the same working day and our emergency line runs 24/7. 443 places in Oxfordshire are on our list, large and small. The nearest of our city pages is Guildford, around 47 miles from Kingston Bagpuize.
Here we cover the OX13 postcode area. Local streets include Faringdon Road, Southmoor Gardens and Redwood Close, all of which are in our area. Close to Kingston Bagpuize, our area also takes in Longworth (1 mile north-west), Hinton Waldrist (2 miles west), Lyford (3 miles south), Charney Bassett (3 miles south-west) and Pusey (3 miles west). Within a short drive, we also cover Oxford (9 miles north-east), Didcot (9 miles south-east), Abingdon-on-Thames (6 miles east) and Witney (8 miles north-west).
What’s near Kingston Bagpuize
Typical jobs here are in properties near The Hinds Head pub and the streets around them. A little further out are Abingdon Community Hospital (5.1 miles east) and Hinton Waldrist Castle (1.7 miles west). Not far away are Hitchcopse Pit.
Common questions in Kingston Bagpuize
Do I need planning permission for a heat pump in Kingston Bagpuize?
The answer turns on the property and where the outdoor unit would sit. Historic England lists about 33 buildings and structures within half a mile of the centre of Kingston Bagpuize. On a house, an air source heat pump can often go ahead under permitted development, with an outdoor unit of no more than 1.5 cubic metres and an installation that meets MCS 020(a), which includes a noise check. Those rights do not reach the grounds of a listed building, and conservation areas rule out walls or roofs facing a road. If that might affect you, we ask the local planning authority (for Kingston Bagpuize, usually Vale of White Horse council).
Is the heat pump grant available in Kingston Bagpuize?
Yes, the scheme covers homes in England, including Kingston Bagpuize, if they qualify. For an air-to-water heat pump the amount is £7,500; an air-to-air system can get £2,500 if it replaces the fossil-fuel heating outright, meets the home’s full heating demand and isn’t an add-on to a boiler. The installer applies, and we are MCS certified.
How much time does a heat pump install need?
Expect it to take a few days on site, depending on the cylinder, the radiators and the pipework involved. How much of the heating changes decides most of the time, and we confirm the timing with your quote.
Does servicing affect my warranty?
Check the manufacturer’s terms. Some warranty terms require the system to be serviced regularly by a qualified engineer, so check the terms or ask us. Either way, keep a record of every service.
Is the equipment covered by a warranty?
It’s the manufacturer’s, and the terms are theirs. Some brands make regular servicing a condition, so keep your service records.
How soon will you get back to me?
On the same working day you contact us. After that, we agree a survey, diagnosis or installation date that suits you, with a fixed price before work starts.
Do you work on systems someone else installed?
Yes. Systems fitted by other companies are fine, on all the main brands. Tell us the make and model and send any paperwork you have.
What happens if it’s left?
Choosing between air-to-water and air-to-air is easier with the facts. Air-to-water works with radiators and a cylinder, with a £7,500 grant for eligible homes, while air-to-air heats and cools rooms and has a £2,500 grant only in limited cases. We explain which makes sense for you. Small faults tend to grow, so it’s worth dealing with them early.
A single unit or a whole estate, the quote is built the same way: the work involved, the access and the equipment. You will have a fixed price before we start, with VAT shown clearly.
Why book with us
- An F-Gas certified company, as the law requires
- Leading brands including Daikin, Mitsubishi Electric and Fujitsu
- One contact for properties across the South East and London
- MCS certification for heat pump work
A customer’s words
“Office air con broke down in the July heatwave. Called at 8am, engineer was here by noon and fixed within 2 hours. Brilliant emergency response. They now hold the service contract for the whole building.”
James T., Crawley, office manager