Kent · Heat pump installation

Heat pump installers in Hinxhill Park

Looking for air source heat pumps in Hinxhill Park? We look at the job first, give you a fixed-price quote and do the work at a time that suits you, finishing with proper records.

  • Checking eligibility for a heat pump grant
  • Checking emitters for a heat pump
  • Finding a place for the outdoor unit

Air source heat pumps for Hinxhill Park

Keeping the system healthy

How well a system lasts depends on use and care. We suggest:

  • Leave indoor units unobstructed
  • Store the MCS certificate and warranty documents together
  • Leave space around the outdoor unit

In cold, damp weather the outdoor unit runs a defrost cycle from time to time. It may give off steam or sound different for a few minutes and it’s part of how the system works.

Let the heat pump run steadily rather than switching it on and off as explained at handover.

How we handle air source heat pumps in Hinxhill Park

Installing an air source heat pump in a home is zero-rated for VAT until 31 March 2027, then 5%. That follows HMRC Notice 708/6, and it does not apply to businesses, and for air-to-air systems we confirm the VAT on your quote. This is general information, not tax advice. If you’re dealing with checking emitters for a heat pump and finding a place for the outdoor unit, we can sort it out.

Space for an outdoor unit is rarely an issue near Hinxhill Park, so the design focuses on heat loss and radiators.

Nothing is signed off by word of mouth: commissioning details and F-Gas records for a new system, a note of the fault and the fix for a repair, or a service record. Keep it with the system’s paperwork so it’s to hand next time.

Location
Hinxhill Park (TN24)
Region
Kent
Response
On the working day you ask
Price guide
£8,000–£16,000 before the grant, 0% VAT on homes
Quotes
Fixed-price quote after a site survey
Certified
F-Gas certified, NICEIC approved, MCS
Phone
07833 053749
Page updated
30 October 2026

Fixed-price quotes for air source heat pumps in Hinxhill Park

Typical ranges are on our prices page, and your quote is built on your job. The quote depends on:

  • A single visit or a regular plan
  • The brand, model and parts involved
  • Whether the existing supply is suitable

One room or a whole building, the quote is built the same way: what needs doing, how we get to it and what it needs. The price is fixed before we start, with VAT shown clearly.

What we need to know

The more you tell us, the more accurate the quote. With your enquiry, please include:

  • Photos showing the indoor unit and the space around it
  • Any error code or flashing light on the display
  • Your installation or service records

Photos are the fastest route to a quote: the inside and outside of the property where the work is, plus the rating plate of any unit already there. Add the address and what you’d like done, and many jobs can be priced from that.

Questions from Hinxhill Park

Do you cover smaller places like Hinxhill Park?

We do. Villages and hamlets get the same service as the bigger towns. Send a few details and photos, and we reply the same working day.

Is the heat pump grant available in Hinxhill Park?

Hinxhill Park is in England, where the Boiler Upgrade Scheme runs. The grant is £7,500 for an air source (air-to-water) heat pump and £2,500 for an air-to-air system that replaces the existing fossil-fuel heating. You do not apply yourself: the MCS certified installer does, which is us.

Why use an F-Gas certified company?

Certification shows a business is approved to work on systems that hold F gas refrigerant. In Great Britain, that certification is a legal requirement, not an optional extra, and we hold it.

Will you work on another installer’s system?

Yes. We look at it first and tell you what we find, including any issues with how it was fitted. Any work is priced before it goes ahead.

How much time does a heat pump install need?

It takes from a couple of days to around a week, depending on the system and how much of the heating changes. The cylinder, the radiators and the pipework make the biggest difference and the timing is set out with your quote.

Who has to arrange F-Gas leak checks?

Whoever operates the equipment, together with the technicians who service it. Larger systems need regular checks: at least every 12 months from 5 tCO2e and every 6 months from 50 tCO2e. We’ll work out which band applies to yours.

What’s the difference between air-to-water and air-to-air heat pumps?

Air-to-water suits homes with radiators and a cylinder; air-to-air suits rooms that need heating and cooling. The survey helps decide. We install both types.

Air source heat pumps in Hinxhill Park: the local picture

Hinxhill Park’s centre falls inside a designated conservation area. On the National Heritage List, around 18 entries fall within 0.5 miles of the middle of Hinxhill Park; Tollgate Cottage (grade II) is one. That affects heat pumps: listed buildings need consent, and conservation areas limit where the outdoor unit can go under permitted development. Where needed, we check with Ashford council, typically the planning authority here. The 2021 Census found about 72% of households in detached or semi-detached houses. Finding room for the outdoor unit and a cylinder is seldom a problem in homes like these.

If your home is one of the older properties near Church of St Mary, the survey checks whether it’s listed or in a conservation area before the outdoor unit position is chosen. With Godinton House about 3.9 miles west, it’s worth asking whether your own home is listed before planning a heat pump.

Hinxhill Park is about 2 miles east of Ashford, in Kent. If you need air source heat pumps in Hinxhill Park, it’s easy to get a fixed-price quote: please ring 07833 053749 or send an email. We work across London and the South East, including Hinxhill Park. 922 places in Kent are on our list, large and small. Eastbourne is in our area too, around 37 miles away.

Streets in the area include Honeysuckle Avenue, Stitchworth Lane and Mallow Road, each of them within reach. Our working area takes in TN24, every street of it. We also cover the places around Hinxhill Park: Hinxhill (1 mile north-east), Sevington (1 mile south-west), Mersham (2 miles south), Ridgeway (2 miles south-east) and South Stour (2 miles south). Further out, we also cover Canterbury (12 miles north-east), Folkestone (11 miles east), Faversham (12 miles north) and Hythe (8 miles south-east).

Near you in Hinxhill Park

In Hinxhill Park, that means homes and buildings near The Norton Knatchbull School, Conningbrook Lakes Country Park and The Blacksmith's Arms Public House, among other places. Hinxhill Park’s nearest station is Ashford International station, about 1.9 miles west. Nearby you will also find William Harvey Hospital (under half a mile north-west) and Ashford Designer Outlet (1.8 miles west). Open spaces near Hinxhill Park include Hatch Park.

Map of Hinxhill Park © OpenStreetMap contributors

The process

We keep the work area tidy as we go, with sheets down and mess cleared as we go. Any holes, fixings or cable routes are agreed with you before we drill. The visit takes several days for an air-to-water system with a new cylinder, less for an air-to-air system. Work in Hinxhill Park is booked in advance at a time that suits you.

  1. Step one is understanding the house, how it’s heated today and what you’d like to change.
  2. We survey the home room by room for heat loss, and check the emitters, hot water and outdoor unit position.
  3. A fixed-price quote follows, setting out the system, any grant that applies and the VAT.
  4. We fit the outdoor unit and connect it to the heating, hot water and controls.
  5. Commissioning, MCS certification and a handover of the controls finish the job.

Getting ready for the visit

  • Tell us about access, such as roof hatches, high walls or locked plant areas
  • Unlock any gate, garage or side passage we need
  • Keep pets out of the rooms we’re working in

Ask for a quote

Some jobs can be priced from photos, while others need a survey. Multi-room systems, commercial buildings and anything with a long or hidden pipe route are normally surveyed first. Either way, you get a fixed price before any work is booked.

Get a price

Related advice

What you can do yourself, and what needs us

Before you call us about a fault, a few checks can save a visit: is the system in the right mode, is the set temperature sensible, are the remote’s batteries working and has the breaker tripped. If the breaker trips a second time, leave it off and phone us on 07833 053749 or fill in the contact form.

Don’t move, re-route or disconnect units or pipework yourself. Disconnecting a system means dealing with refrigerant, which only a qualified engineer can do, and the electrics need care too. Ask us to quote for a move instead.

From one of our customers

“Excellent service from start to finish. Two wall-mounted units installed in our home. Clean, tidy work: they protected all the floors and left no mess. The systems work brilliantly. Would highly recommend.”

Sarah M., East Grinstead

F-Gas certified companyRefrigerant work done and recorded properly
NICEIC approvedElectrical work certified
MCS certifiedHeat pump installations
Checkatrade memberVetted trade directory
24/7 emergency lineBased in East Grinstead